Many suitcases and bags have combination locks, which helps ensure the safety of the items inside. However, sometimes you may encounter a problem that the owner has forgotten the code.

The easiest and most effective way to open a suitcase or bag in this case is to contact a specialist. He will not only open the product, but also help change the code to a new one. You can try to do this at home too. In this article we will look at how to open a combination lock on a suitcase.

How to open a suitcase depending on the type of lock

• A built-in key lock is the oldest type of lock, which is built into the body of a suitcase or bag and is opened using a specific key. If you have lost or broken the key, you can open the lock using a nail file or knife, carefully prying the latch. However, high-quality and reliable products like Redmond cannot be discovered this way. You will have to carry your luggage to the repair shop;
• The padlock is attached to the zipper slider. Made with a code or key. Note that this type of lock is the easiest to open, so it does not provide adequate security for the contents. You can open a padlock with a key using a small screwdriver. In addition, you can cut off the lock with powerful nippers;
• A suitcase with a combination lock is the most budget-friendly and common option, which is used on almost every similar product, such as Samsonite. In this case, you can choose the code yourself. A cheap plastic lock can be opened with a screwdriver or knife;
• A zipper with any lock can be pierced with a ballpoint pen or a sharp object, then pulled apart and pulled through with a slider. This will open the bag, but then you will have to change the zipper. What to do if lightning diverges, read.

Design, operation and installation of a combination lock

A built-in combination lock with a three-digit, less often four-digit code is the most common option. Therefore, let us dwell in more detail on this type of device and consider how it works. This type of lock includes a latch, three or four number wheels, release buttons, and slots for zipper sliders.

On suitcases from Samsonite and other popular companies, the default code is “000” or “0000”, less often “111” or “1111”. To configure the combination lock, you need to reset these values. Press the button, enter the factory code, enter new numbers and release the button. Then new values ​​are set. After this, you need to close the suitcase or bag and insert the sliders into the slots. The numbers on the wheels are recorded in random order.

To change the code on a combination lock, use the same steps, only instead of the factory code, enter the previously entered one. To unlock the code and open the suitcase, the code is entered in the required sequence. We looked at how to install and how to change the code on the product. We learned how to use such devices. But what to do if you forgot the code?

Five ways to open a combination lock on a suitcase

1. Try to find the code. To do this, carefully press the button and scroll the wheels until you hear a characteristic click or until they become more difficult to turn or stop altogether. Try each of the three or four digits. This is a long process that requires time and patience;
2. The correctness of entering a particular number can be seen using the gaps at the lock. If the number is set incorrectly, only the wheel will be visible through the gap. If the number is chosen correctly, the groove is visible;
3. Most locks on modern suitcases are made of cheap plastic. In this case, the constipation can be broken using a thin screwdriver, knife or nail file. Pry the sharp end of the mechanism and turn it;
4. Pierce the zipper with a pencil, ballpoint pen or other sharp object, separate the teeth, and walk with the dog. The zipper will open, but after this the fastener will have to be repaired or replaced;
5. Remove the lock from your suitcase or bag. As a rule, the standard device is attached with only two screws. Unscrew and carefully remove the back cover of the device and align the wheels so that the bolt fits into the groove of each wheel. See how the numbers are set, put the cover back on and secure the lock in place. Enter the numbers you see, the lock will open! After that, all that remains is to change the code.

The latter method will preserve the mechanism, functions and integrity of the suitcase. But in this case, it is important not to touch the springs and plastic parts, so as not to break the device. Therefore, work with a small screwdriver or tweezers. High-quality locks cannot be broken or unscrewed, so you will have to go to a workshop.

Despite its small size, a lock on your luggage bag or suitcase can give you peace of mind. It prevents unauthorized access and theft of your personal belongings. Each bag model has its own default combination of numbers, usually 0-0-0-0, but each user can change it at any time.

Different models of suitcases have different locking locks: lever, push-button or zippered.

How to change the code on a suitcase with a lever lock?

• Close your suitcase or briefcase. Locate the small lever on your luggage lock. It can be located on the outside next to the dial or on the inside of the lock.

• Set the factory default lock combination. Set the dial to "0-0-0-0", if it only contains three digits, set to "0-0-0".

• Press and hold the small button located next to the watch face. Some bags have a lever next to the dial that you press and push down or to the side as far as possible.

• Once the lever has been moved to the "code setting" position, turn each dial to select the desired number.

• After setting the new combination, move the small lever on the lock back from the “code setting” position to the original position. The combination lock has now been reset and you can use the new combination to open the suitcase.

How to change the code on a suitcase with a push-button lock

• Unlock the bag using the factory combination (0-0-0).
• Choose a new combination. Press and hold the button while spinning the dials.
• After the selected combination of numbers, release the button. Place the zippers into the slot locks, double checking that your new combination is installed.

Changing the code on a suitcase with a padlock

• Enter your lock's factory combination.
• Pull out one shackle of the suitcase lock.
• Rotate the lever 90 degrees and then press and hold it in place.
• Enter your new desired combination.
• Release the lever and place it in the "closed" position.
• Turn the dials around a few times and then enter a new combination to test the lock.

Combination locks are divided into two main types: those with the ability to change the numeric combination, which is the cipher for opening, and those with a standard, non-changing code. If possible, it is more advisable to have a built-in function for replacing the working cipher, since they are characterized by a higher degree of reliability. How to change the code on the lock? To do this, you should carefully read the instructions provided in this article.

Main types of combination locks

Before answering the question of how to change the code on a lock, you need to understand the types and design features of the devices. So, combination locks can be:

1. mechanical. The code on the lock can be dialed:
   • by pressing number keys ();

• setting the code in a certain order (mechanical disk lock);

1. electromechanical. Such devices consist of two interconnected blocks: a locking mechanism and a code panel that activates the lock bolt. The individual parts of the lock are connected to each other by an electric drive. The device is controlled using an electric drive, and the secret part is equipped with mechanical elements;

1. electronic. Both the control and the secret part of the lock are based on electronic components. The lock requires a source of electrical current to operate.

Electronic and electromechanical locks are considered more reliable than mechanical ones.

Self-recoding of the lock

You can change the lock code on any device that has this function. Recoding may require partial removal of the lock or purchasing a special key.

Replacing the cipher on a mechanical push-button lock

How to change the code on a mechanical type combination lock equipped with buttons? To do this you will need to perform the following operations:

1. Using a screwdriver of the appropriate size, remove the keypad of the lock. This action is necessary to gain access to cipher management;

1. Inside the lock there are 10 plates (corresponding to the number of buttons), which are installed in a certain position. Each plate has a slight bevel on one side. The working plates, the numbers of which are included in the digital combination, which is the code, are directed with a cut towards the center of the lock. The rest - to the edges of the locking device;

1. To change the combination of numbers that make up the opening code, you need to turn over the corresponding plates. To do this, you need to remove the lock element from its groove and rotate it around its axis.

The lock must be recoded only with the door open or the locking mechanism removed.

You can learn more about the procedure for changing the code on a mechanical push-button lock by watching the video.

Replacing the code on a mechanical disk lock

Disc locks can also be mortise. The latest devices are usually installed on safes. Padlocks are used more widely. Let's consider how to change the code on a combination padlock equipped with disks. The following instructions should be followed:

1. the locking device must be moved to the “open” position;
2. lock the padlock shackle by pressing it;
3. set the required combination of numbers;
4. lower the bow and check operation.

The code on the padlock must be changed before using it. The standard digital combination, which is a cipher, consists of zeros.

Changing the code on electromechanical and electronic locks

Electromechanical and electronic locks are similar in design. The locking mechanism is controlled by entering a specific code consisting of various numbers. Moreover, unlike mechanical combination locks, the numbers that make up the numerical combination of the code can be repeated.

To change the code on an electronic or electromechanical device, you must carefully read the instructions supplied with the lock. The cipher can be replaced in one of the following ways:

1. by introducing a code that switches the locking mechanism to programming mode;
2. using a special key.

To change the cipher in devices equipped with a transcoding mode, you will need:

• enter a code that switches the lock from operating mode to coding mode. This code must be included with the device when you purchase it. The cipher can be entered directly by a keyboard located on the lock or by an additional device that remotely acts on the locking mechanism;
• enter a new numerical combination, which will subsequently serve as a working code;
• put the lock into operation mode and check its functionality.

If the cipher that switches the lock into recoding mode is unknown, it is recommended to contact the lock manufacturer or specialists.

Changing the code in locks using a key is carried out in the following order:

• the key is inserted into a special hole, usually located on the side of the lock. In this way, the device goes into a mode in which the cipher can be changed;
• a new code is introduced;
• the key is removed and the operation of the device is checked.

If the lock can only be recoded using a special key, then it must be included with the device.

The procedure for changing the code on the lock takes no more than 5 minutes. Before replacing the code, it is recommended that you read the instructions included with the locking mechanism.

The design of modern travel suitcase models includes a combination lock system that prevents unauthorized opening. This precaution helps protect contents from theft in public areas, including an airport or hotel. However, not all new owners of suitcases with a lock know how to set it up correctly and set a personal code that allows the suitcase to be opened only when dialed. It turns out that this can be done quite quickly.

How to change the code on a suitcase - instructions

The locks of new suitcases are always set to a factory code consisting of three zeros - 000. This standard set of numbers must be changed by the owner to prevent spontaneous changes or use by others for their own purposes. There are two types of locks on a suitcase or bag - padded or fixed.

Procedure for setting a code on a fixed lock

To find out how to set the code on your suitcase, read the instructions below:

1. Open the suitcase, fixing the factory code combination on the lock.
2. Block the lock code using a special button or lever on its side.
3. Keep the button pressed. If it is a lever, you need to move it to the right, then up.
4. When the button is pressed or the lever is installed in the indicated position, it is necessary to change the code on the lock by setting the desired combination.
5. Immediately after setting the combination, you need to release the button or return the lever to its original starting position.

How to change the code on a padlock

To learn how to set a code on a suitcase with a combination padlock, read the following instructions and follow the necessary steps:

These simple instructions will allow you to protect your suitcase with a new individual code on the lock and protect yourself from theft. In both cases, it is necessary to accurately remember the entered numbers in order to avoid the unpleasant situation of a locked lock at the most inopportune moment. If you're not sure you can store a set of numbers in your head, use combinations that only you know, such as your date of birth. You can, of course, write down the combination and store it in your personal notebook.

There are times in everyday life when it is necessary to replace the lock on a door or set a code on it. Many owners believe that it is impossible to do this without preparation, and resort to the help of services that deal with similar tasks. However, you can completely do without their intervention, using our proposed option for putting into operation a door combination lock of the German brand “Format”.

The procedure for changing or setting the code on the door lock

Changing the code on the lock must be done from the inside of the door. This operation cannot be performed from the outside. If it is necessary to replace it on the front side, complete dismantling of the door will be necessary.

1. First, you need to leave the door open and close the lock.
2. Next, you need to dial the initial code recorded when installing the entrance lock.
3. There is a mark on the lock disk for changing the code; you will need to find it.
4. It is necessary to set the last number on this label.
5. For further actions you will need a key to the lock. It is installed into the lock from the inside until it stops.
6. The key is turned 90 0 clockwise without sudden movements until it reaches the “CHANGE” position.
7. When the key is installed in the lock, a new code combination is entered.
8. To enter the first digit from the code combination, you need to turn the dial counterclockwise four times, setting the “change code” position opposite.
9. The second digit is entered by rotating the dial in the opposite direction three times, reaching the opposite position relative to the code change mark.
   10. The third digit is fixed after turning the lock dial twice completely counterclockwise at the above position.
   11. After this action, the special key to the lock is turned to the “INSERTION” position and pulled out.

This organized instruction will help you set the code on your door lock without much effort, quickly and reliably. All actions must be performed in a clearly specified sequence. Any change in its execution may render the lock unusable in the future due to its automatic locking.

If you doubt the reliability of carrying out the proposed operations on your own, then it is better to seek help from specialists who provide services in this format. Fortunately, there are currently plenty of companies providing professional assistance in solving problems of changing and installing code. A qualified worker will quickly be able to determine the type of coding, reset the door lock code and undertakes to keep the final data confidential.

Instructions for use

Have you bought a new suitcase with a combination lock and don't know how to set your combination correctly? Don’t worry, every second traveler asks this question after making a purchase.

Let us immediately reassure you that there is nothing complicated in this procedure. A couple of minutes is enough, and your suitcase will become an impregnable fortress for everyone except its rightful owner.

For any model, the factory lock opening code is initially set to three zeros - “000”.

For fixed combination lock:

Important– do not press the button / change the position of the lever before you finish typing the numbers. This may result in the wrong code being installed.

For padlock combination:

Well, your personal code has been installed! Now the most important thing is to remember the saved combination of numbers! Choose a number that you know you won't forget. These could be your birthday, postal code, or just your lucky number.

If you forget the set code, opening your suitcase can be a big problem. You will either have to spend a long time and persistently trying out all possible numerical combinations, or take your suitcase to a warranty workshop and ask for help from specialists. This is not so scary if you are just going on a trip. What if you are in another country and all your things are locked inside? It’s better to play it safe and write down the digital code, hiding it in a safe place.

Most modern travel suitcases come with a special combination lock that prevents the suitcase from being opened, which means the theft of your personal property at a hotel or airport. Many people who bought such a suitcase do not know how to properly set up a combination lock. You can set a new code on your travel bag in a couple of minutes.

By default, suitcase locks are set to the factory settings - the opening code is 000. Leaving the default code unchanged can be dangerous, so take care to change it. First, determine what type of lock on your bag is a fixed or padlock.

If the lock is fixed, open the suitcase by setting the combination lock to the factory combination, and then find the lock code lock button, which is usually located on the side of the suitcase and looks like a button or a lever.

Take a thin, sharp object, such as a toothpick, and poke the code lock button or slide the lever to the right and up. While holding the button in this position, change the combination of numbers in the lock, and then release the button or return the lever back to the position in which it was. Now your suitcase will only open after entering a new code.

If the suitcase is equipped with a combination padlock, first open the lock by turning the metal arc 90 or 180 degrees and press it inward. Hold the metal arc in the depressed position and at this time enter new numbers by turning the dials of the lock. When the correct numbers are set, release the lock clasp.

Remember the set code as best as possible so as not to encounter the inability to open the suitcase at the most inopportune moment. You can write the code down in a safe place and also use the first digits of your date as the code.

Combination locks are divided into two main types: those with the ability to change the numeric combination, which is the cipher for opening, and those with a standard, non-changing code. If possible, it is more advisable to have a built-in function for replacing the working cipher, since they are characterized by a higher degree of reliability. How to change the code on the lock? To do this, you should carefully read the instructions provided in this article.

Main types of combination locks

Before answering the question of how to change the code on a lock, you need to understand the types and design features of the devices. So, combination locks can be:

1. mechanical. The code on the lock can be dialed:
   • by pressing number keys ();

• setting the code in a certain order (mechanical disk lock);

1. electromechanical. Such devices consist of two interconnected blocks: a locking mechanism and a code panel that activates the lock bolt. The individual parts of the lock are connected to each other by an electric drive. The device is controlled using an electric drive, and the secret part is equipped with mechanical elements;

1. electronic. Both the control and the secret part of the lock are based on electronic components. The lock requires a source of electrical current to operate.

Electronic and electromechanical locks are considered more reliable than mechanical ones.

Self-recoding of the lock

You can change the lock code on any device that has this function. Recoding may require partial removal of the lock or purchasing a special key.

Replacing the cipher on a mechanical push-button lock

How to change the code on a mechanical type combination lock equipped with buttons? To do this you will need to perform the following operations:

1. Using a screwdriver of the appropriate size, remove the keypad of the lock. This action is necessary to gain access to cipher management;

1. Inside the lock there are 10 plates (corresponding to the number of buttons), which are installed in a certain position. Each plate has a slight bevel on one side. The working plates, the numbers of which are included in the digital combination, which is the code, are directed with a cut towards the center of the lock. The rest - to the edges of the locking device;

1. To change the combination of numbers that make up the opening code, you need to turn over the corresponding plates. To do this, you need to remove the lock element from its groove and rotate it around its axis.

The lock must be recoded only with the door open or the locking mechanism removed.

You can learn more about the procedure for changing the code on a mechanical push-button lock by watching the video.

Replacing the code on a mechanical disk lock

Disc locks can also be mortise. The latest devices are usually installed on safes. Padlocks are used more widely. Let's consider how to change the code on a combination padlock equipped with disks. The following instructions should be followed:

1. the locking device must be moved to the “open” position;
2. lock the padlock shackle by pressing it;
3. set the required combination of numbers;
4. lower the bow and check operation.

The code on the padlock must be changed before using it. The standard digital combination, which is a cipher, consists of zeros.

Changing the code on electromechanical and electronic locks

Electromechanical and electronic locks are similar in design. The locking mechanism is controlled by entering a specific code consisting of various numbers. Moreover, unlike mechanical combination locks, the numbers that make up the numerical combination of the code can be repeated.

To change the code on an electronic or electromechanical device, you must carefully read the instructions supplied with the lock. The cipher can be replaced in one of the following ways:

1. by introducing a code that switches the locking mechanism to programming mode;
2. using a special key.

To change the cipher in devices equipped with a transcoding mode, you will need:

• enter a code that switches the lock from operating mode to coding mode. This code must be included with the device when you purchase it. The cipher can be entered directly by a keyboard located on the lock or by an additional device that remotely acts on the locking mechanism;
• enter a new numerical combination, which will subsequently serve as a working code;
• put the lock into operation mode and check its functionality.

If the cipher that switches the lock into recoding mode is unknown, it is recommended to contact the lock manufacturer or specialists.

Changing the code in locks using a key is carried out in the following order:

• the key is inserted into a special hole, usually located on the side of the lock. In this way, the device goes into a mode in which the cipher can be changed;
• a new code is introduced;
• the key is removed and the operation of the device is checked.

If the lock can only be recoded using a special key, then it must be included with the device.

The procedure for changing the code on the lock takes no more than 5 minutes. Before replacing the code, it is recommended that you read the instructions included with the locking mechanism.

A door cannot be without a lock, unless it is an interior door. Today there are a large number of varieties of door locks, but combination locks are especially popular.

The advantage of a combination lock on the door is that it does not have a hole for a key, so it is impossible to break the combination lock with a regular master key.

In addition, if you change the code in a combination lock in a timely manner, this will ensure its greater reliability against unauthorized access.

To know how to set up a combination lock on a door, you need to prepare, read the manufacturer's recommendations and follow certain sequences. As mentioned above, the big advantage of mechanical combination door locks is the absence of any keyhole for inserting a key, and this is a big advantage.

The advantage is that it is quite simple, just like on the door, using ordinary carpentry tools. To find out, you can read about this in other articles by following the links above.

How to recode a combination lock and change the code?

It is necessary to recode a combination lock and change its code in several cases: to change the factory code and thereby the settings of the lock, and to ensure high security of the combination lock from guessing the cipher.

In fact, changing the code and reconfiguring the combination lock is quite simple and can be done with your own hands. After studying the instructions for the combination lock and the manufacturer's recommendations, you can begin reprogramming the combination lock.

This process is very fast, and to carry it out you should use a certain device, which is inserted into a specially located hole on the combination lock, most often located on the front side of the door.

This special hole is precisely intended to allow a technical device to change the location of the lock cylinders and the coding of the combination lock along with it. You should know how to set a combination lock on a door, since the door must be wide open when changing the code, and the bolts must be extended to the maximum possible position at this time.

After this, it is enough to turn the special device in the combination lock through the hole until it stops, insert a new key and close the bolts back using the key.

The success of the operation will be the combination lock responding only to the new key and updated code. If the actions are performed incorrectly, the combination lock will not react in any way to changing the code.

Now It is possible to change the PIN code on the card. This may be necessary in various situations: you don’t like the current PIN code, other people have recognized it, you want to set the same one on several cards for ease of remembering, or to protect your finances from fraudsters. It's not possible now change PIN code through Sberbank online— the operation is only possible when using an ATM and, if you remember the current code.

How to change the PIN code on a Sberbank card instructions:

1. We insert the card into the ATM.
2. Enter Pin, set in the current period.
3. Login to your personal account ( Personal Area), find " Information and service».
4. Here we find " Change PIN" We enter the new code, then again, confirming the operation.
5. Information will appear indicating that the operation was completed successfully. A check will be issued that PIN code changed. Now you need to remember it, and forget about the old one.

If you forgot the current one PIN code from the card – change it to new one it is forbidden. Even in the branch of the bank itself where the card was issued. You will have to reissue the card.