How to make a soft sofa with your own hands drawings. How to make a sofa with your own hands: options, instructions and assembly diagrams

Have you ever had a question - how to make a sofa? with my own hands? Now upholstered furniture has an unreasonably high price, it doesn’t matter if you order it from craftsmen or buy it in a store. The cost of a self-made sofa may be much less and, moreover, you can create a sofa that will completely satisfy you and suit your interior perfectly.

Making a sofa with your own hands

In the drawing of the version of the sofa proposed in the figure, there are no difficult connections of parts; simplicity is achieved due to the frame, which will be supported on plywood attached to the seat and back along the entire plane.

Laying down plywood and assembling the frame of the seat and backrest

The joints can be additionally reinforced with metal corners if desired. And most importantly, do not forget to fasten the structure in the corners with self-tapping screws

You need to start with the seat frame, which is the base. Crossbar bars with a cross section of 40x40 mm should be attached to four support legs made from wooden blocks of durable wood, which have a cross-section of 70x80 mm and a height of 100-150 mm. To increase the reliability of the structure, they can be supported with metal corners.

The length and width of the sofa can be chosen arbitrarily, according to your taste. You just need to remember that all the dimensions of the sofa will depend on the size of its base.

Next comes the back of the sofa, which should have a slight slope for comfort. IN this option The sofa's back frame consists of four vertical and two horizontal boards about 30 mm thick. You are also free to choose the height of the sofa yourself, based on your preferences and capabilities.

The plywood should be covered with batting on all sides. Then you need to connect the base to the back.

After the size of the collapsible seat has been marked, you need to start assembling its lower part, which consists of three short and two long boards. One of the three boards will be located in the middle of the seat in order to increase its tolerance and reliability, and it will also form two compartments inside the sofa. The bottom of the seat, in turn, is made of plywood.

The resulting structure must be covered with fabric, which will be held with a construction stapler.

Then it needs to be installed on the base and secured to the base itself and to the back of the sofa. The top of the sofa should be made of thick plywood and a fairly thick layer (about 20-25 cm) of foam rubber. The plywood with foam rubber, in turn, needs to be covered with fabric and then the upper part of the seat must be secured to the lower part near the hinges.

Now your sofa is ready.

At the same time, you needed fewer tools, which every person who loves to do everything with their own hands will always have.

The good thing about an ottoman is that it looks quite presentable during the day, and at night it turns into a comfortable sleeping bed. The stores are full of similar products, you can choose any color and size. But if you want something exclusive, and your skillful hands miss the work, then why not build it yourself. For yourself or for your children. And at the same time you will be able to save money.

First of all, you need to decide what design the planned couch will have. Does it need a backrest (or maybe two), what height will the legs be, is it supposed to have a device. Well, other nuances need to be taken into account. Depending on the model, the amount of materials and their type are calculated.

However, as a rule, to make the ottoman frame they use either wood boards, or furniture panels. The first option is cheaper, and the second is better in terms of strength and environmental friendliness. You will also need wooden blocks, steel furniture corners, and screws to connect the parts.

As for the tool, you should prepare:

• sharpened simple pencil for marking;
• tape measure, ruler, square;
• electric jigsaw;
• screwdriver (or screwdriver);
• furniture (construction) stapler for fastening upholstery.

Stylish homemade sofa for the cottage

DIY sofa-ottoman

Pull-out model

This type of furniture, such as a do-it-yourself pull-out ottoman bed, is perfect for a family with two children.

To do this, you will need two strong frames of a suitable size (by the way, you can use old single beds or sofas. Or make frames from wooden blocks.

The upper ottoman, which will not slide out, has side backs and fairly high legs. Its frame is reinforced with narrow transverse strips 1.4 centimeters thick. The lower bed, which slides under the first, has only a front one. and two legs. It is equipped with wider cross bars cut from 1.4 centimeter thick plywood. They are fixed so that when moving they fall between the upper bars. In addition, we need transverse bars that limit the movement and are attached to the wide slats.

The following video will tell you how to make a stylish sofa-ottoman with your own hands:

Children's version

Making it yourself is very practical. After all, children grow up so quickly - why waste money. Moreover, you can make a cute little thing that the baby will love very much.

So, we decided to build a small sofa 1.5 by 0.8 meters. There you are step-by-step instruction How to make an ottoman for a nursery with your own hands:

1. Let's take slats 4 by 3 centimeters - this will be our frame. We will strengthen it with metal corners. If desired, you can make legs - either from bars or from figured balusters.
2. Now we take wood boards and sheathe our frame on all sides except the top. You will get a large box, which we block across with a block. We treat the surface outside and inside - prime and paint.
3. We cut out the seat and back (straight or figured) from thick plywood. We glue two layers of foam rubber to them - 10 centimeters and 2 centimeters. After the glue has dried, we cover the parts with batting and on top with upholstery fabric.
4. Using corners and screws, we attach the back to the frame. We secure the seat using furniture hinges- under it we got spacious drawers for bed.

DIY ottoman for a teenager

Conversion of a bed

It happens that you want to update the interior, and there is just a fountain of thoughts about this, but one thing stops you - lack of money. But in the house there is an old, but still strong bed, and the owner is with a hammer, saw and screwdriver. In this case, there is every chance of getting a wonderful ottoman that will cost almost nothing. Unless you need to spend money on beautiful upholstery fabric.

Let's describe the process step by step:

1. We disassemble the old bed, carefully removing both backs and legs. Well, we remove the mattress first (if there is one). If the bed is very old, then we will disassemble the frame, coat the parts with glue (PVA is best), and then assemble it and let it dry. This will prevent any unpleasant squeaking during operation.
2. We will sew a cover from dense material, measuring all the details. You can attach the cover using glue or a furniture stapler. In the latter case, you can attach a separate piece of fabric, cut to size, to each part.
3. If there is a mattress, then we put it in place. If it is not there (worn out), then we buy it. Or use dense polyurethane foam instead of a mattress the right size. We cover the top of the mattress with a cover made of upholstery fabric, and inside we sew another cover - not necessarily elegant, but dense
4. We attach one of the headboards of the bed to the frame and make markings using chalk according to the shape of the future backrest of the ottoman.
5. We cut out the backrest with a jigsaw, cover it and the legs of the bed with padding polyester, and sew covers from upholstery fabric for all these parts.
6. Turn the frame upside down. We put the legs in covers and screw them, hiding the edges, to the frame.
7. We fasten the back, dressed in a cover (hem the edges at the bottom for neatness), with screws in several places.

An excellent example of placing a DIY ottoman

We create a sofa-sofa yourself

To make a sofa-sofa, you need little: decide on the model, find a suitable drawing and clarify the dimensions. To do this, let's measure the space intended for our future furniture.

Now let’s prepare wood boards 1.9 centimeters thick, which will make up the frame of the product. You will also need 3 by 4 centimeter bars, which will make the structure reliable.

Now let's get started:

1. We cut out two side, front and back parts. Moreover, the back part should be higher than the front (the difference depends on the desired height of the back), and the right part should be slightly higher than the left one.
2. We assemble all the parts, fastening them with furniture screws, the heads of which are hidden. We screw the bars to the side parts, stepping back a centimeter from the top. In the middle part of the product we fix two transverse bars to hold soft pillows.
3. We cover the sloppy chipboard edges with special overlays, using small nails and glue to secure them. Then we prime, varnish or paint the frame.
4. Soft pillows (three pieces for the seats and three for the back) are made of high-density polyurethane foam. The inner covers are solid. The outer covers consist of two hemmed pieces of fabric with eyelets along the edges, tightened with a cord.

The following video will tell us how to make a sofa in the style of a Chester sofa with your own hands:

Old ottoman

When the upholstery is frayed and worn, upholstered furniture, even quite strong ones, takes on an extremely pitiful appearance. And it’s a shame to invite guests. But you can fix this with your own hands by buying seven meters of suitable upholstery fabric and setting aside time for work.

1. First you need to disassemble by removing all the overhead elements (in particular, the back).
2. Then, using an anti-stapler, side cutters and a flat screwdriver, you need to remove old upholstery. We try to do this as carefully as possible - after all, all these removed pieces will serve as patterns for fresh upholstery.
3. Next, we look at what’s underneath: if the foam rubber or spring blocks are out of order, then they will need to be replaced. In any case, a layer of fresh foam rubber will not be superfluous.
4. We ripped out the old upholstery and cut out new parts from it.
5. Then we sew them where necessary.
6. All that remains is to secure the fabric with a furniture stapler, avoiding distortion and pulling it well.
7. Then we assemble the updated ottoman.

And if internal filling It's still quite good, but only the upholstery is damaged, you can do it easier - sew a new cover.

The following video will tell you how to reupholster an old chair, difan, sofa or, for example, ottoman with your own hands:

Spring cushions

The spring block of the pillow is still quite good, but the upper layers have become unusable - this happens quite often. In this case best option– cover the spring block on all sides with felt, and then with three-centimeter polyurethane foam grade 4065.

The most economical way: leave the burlap of the spring block. If it is shabby, we replace it with old pillow upholstery. Then we glue the outer box made of polyurethane foam grade 3038. Thickness - 3 centimeters.

If the springs fail, they will have to be replaced. However, if the price for them seems too high, you can make new pillows from the same polyurethane foam. It will be cheaper. For softness, we wrap them in padding polyester.

Old sofa with new pillows

A corner sofa is always in demand. It is roomy and does not take up much space. It’s not for nothing that such sofas are called family sofas, because the whole family can sit on it. Handmade furniture is popular today, and sofas are no exception.

Pros of DIY

Originality of execution and independent choice shapes and colors - the main advantages self-made. At the same time, you control the price range yourself, choosing the material according to your wallet. Another plus is quality control. Everything depends only on you, and therefore there is no risk of being deceived.

The most pleasant thing is aesthetic pleasure and a feeling of pride in the work done. The delight of others and respectful glances at your brainchild will only strengthen this state. Therefore, you can safely take on the task of making a sofa for the comfort and coziness of your home.

Material selection

The choice of material should be approached very seriously; you need to think through the design of the sofa in advance. Having compiled detailed list everything you need, you can go to hardware store. The thickness and quantity of everything needed will depend only on your preferences and wishes.

The base of the sofa is most often made of wood, timber coniferous trees. Usually preference is given to pine timber, as it is stronger than its “brothers”. The following important materials can be highlighted:

• Fiberboard – bottom for the sofa and drawers.
• Chipboard – laminated, used for furniture panels (sofa base and armrests).
• Plywood is the covering for the sofa frame. Birch is considered the best.
• Foam rubber, synthetic winterizer - materials for stuffing the back of a sofa and pillows.
• Upholstery fabric is a decorative part of the sofa, used for upholstery and creating the final look.
• Fasteners - screws, self-tapping screws, corners, nails and everything that will be used to assemble the elements.
• Retractable mechanism - type of mechanism, the choice depends on your desire, as well as on your skills.
• Furniture legs – can be stable or on wheels.
• Glue and threads are useful when joining pieces of foam rubber and re-upholstering work.

Required Tools

So, you will need to prepare the following:

• A screwdriver with different attachments - for screwing in fasteners or creating holes.
• Circular saw – for cutting large elements that require precision (or a jigsaw).
• A hacksaw (hand saw) and a miter box - for cutting precise angles.
• Knife for cutting foam rubber and scissors for fabric.
• Sewing machine – for the cover and upholstery.
• Furniture stapler - for securing material.
• Twine or twine - to give an interesting shape to the back and various elements.

How to make your own model at home?

So, preparation is needed. To make a sofa, you need to make a drawing with all the dimensions and elements. If you have problems with cutting, you can order it from the store where you will purchase the materials.

Number all the parts (in accordance with the drawing) and carefully arrange everything in order of importance: the most necessary - on top or next to it, then smaller elements. It is important to start assembly with large parts, then you need to gradually “build up” everything else onto the frame. Fastenings can only be screws. For durability, you can first glue it and then secure the result with screws.

Manufacturing.

Considering the fact that the sofa is corner, you should not confuse the details of the short and long sides. Execution order:

• To begin, set up two sidewalls and, using fasteners, connect them to a horizontal beam and vertical posts. There must be at least four attachment points for each rack. The frame of one side is ready. Now it needs to be sheathed. A sheet of plywood is attached to the top of the frame. Chipboard needs to be attached to the back.

• If the box is removable, then it can be made of fiberboard. For the lifting mechanism, drill holes for mounting bolts and secure.

• Armrests for a sofa can be removable, fabric or connected to a frame. To do this, screw a beam that follows the shape of the armrest to the frame. All this is covered with chipboard.

• If the armrests are of an unusual shape, with curves, then use fiberboard and a lot of small nails. Sharp edges need to be smoothed out so that the lining does not wear out.

• Ready wooden structure cover with foam rubber - for the seats, take solid dense pieces for the left and right parts, and the back can be made into a prefabricated one, from several elements. The recommended thickness of foam rubber is more than 100 millimeters. If there is no such thickness, then thin elements can be glued together.

• If you want to make an interesting back with curves, then use twine and leftover pieces of foam rubber, giving beautiful shape. For armrests it is better to use batting. The assembly of the base is complete at this stage.

• Move on to the upholstery. To prevent the fabric from fraying, the foam rubber does not wear out, it is better to make a tightening between them with agrotextiles. For upholstery, choose dense, wear-resistant fabrics - tapestry, thermo-jacquard or chenille.

• For accuracy and beauty, a pattern or pattern is needed. You can also lay the fabric against the sofa and mark the cutting areas with chalk. At the same time, do not forget to leave fabric allowances of 2-3 centimeters. When cutting out the backrest, take into account its shape, creating appropriate elements. The banner can be with stitched elements.

• To create bulges in the back, use twine and a stapler. Make holes in the back for tensioning in advance. Place a loop through the holes and attach the twine to it.

• When doing upholstery, make sure the tension is even. The picture must match. To simplify the work, use plain fabrics or patterns that do not require precision.

If you are a fan of soft sofas, you can sew pillows to size and add them to the frame. If necessary, they can simply be removed.

We do it on the balcony or gazebo

With a corner sofa on the balcony and in the gazebo, you are guaranteed comfort. On warm summer evenings it will be very pleasant to gather with the whole family or invite friends.

Such a sofa can be created from ordinary and familiar pallets. Another name is pallets.

All the work consists of building the necessary structure from the boxes and fastening them. However, for aesthetics, it is necessary to pre-treat the pallets in any convenient and suitable way for the interior - sanding, painting, varnishing, creating an aging or glossy effect, decoupage, drawing. Whatever comes to mind and matches the fabric will do.

The sofa is the most important part of the interior. It is the calling card of every home, so it needs to be beautiful, reliable, and practical. But the models presented in stores are often unusually expensive. The best decision- creating this piece of furniture with your own hands, which will save a huge share of the family budget.

In addition, to repair a sofa done yourself, it makes no sense to call a specialist. Knowing its structure, it is easier to fix the breakdown yourself.

When comparing photos of a homemade sofa and a purchased one, it is sometimes difficult to find significant differences in quality. By strictly following the instructions, anyone can make a first-class product with their own hands.

To do this you will need the following tools:

• jigsaw;
• special stapler for furniture;
• screwdriver or drill;
• sander (a simple plane will do);
• sewing machine;
• sharp knife and scissors;
• roulette.

The types and designs of sofas are varied, but the main components of the product always remain:

• frame;
• mattress frame;
• back;
• side parts;
• stuffing;
• fabric covering.

To make them you will need:

• wooden blocks with a cross section of 40-50 mm;
• plywood with a thickness of 5 mm;
• padding (foam rubber, holofiber, batting);
• furniture belts (optional);
• textile material (batting, padding polyester);
• furniture fabric;
• strong thread for stitching upholstery;
• screws, corners, self-tapping screws.

The instructions for assembling the sofa are simple. The main thing here is the sequence of actions.

Frame

Made from long bars. To add additional rigidity, plywood, chipboard, OSB and other sheet materials are used.

All this is held together with self-tapping screws, screws and corners. They can be lubricated with glue before screwing in, after drilling holes. For convenience, you can first connect the parts with glue.

Mattress frame

It is made from a solid sheet of chipboard or from bonded boards bound with furniture straps. It is not difficult to make: first they are fastened with a stapler vertically, then the belts are intertwined with them and fixed horizontally (perpendicularly). Thanks to the binding, this piece of furniture will spring perfectly.

Back and sides

Usually hollow inside. The frame is sheathed at the back with a sheet of plywood and covered with fabric, securing it with a stapler. The ends are connected to the front side. With help metal corners you need to fix the backrest to the base.

You can give it a sloping shape and adjust the slope as you wish. The sides are produced in the same way. Then, all sharp ends of the resulting base are sanded with a sander or plane to avoid rapid wear of the upholstery.

Pasting

It is most convenient to use high-quality foam rubber mats, in order to avoid the appearance of holes on the surface, with a density of 35 kg/m3. Having measured the pieces of the required size, you need to paste over the back on top and front, the sides with inside, plane on top of the binding.

The ends of the foam rubber can be secured with a stapler. After the glue has dried, these elements are wrapped in batting or padding polyester to achieve volume and smooth out unevenness.

Upholstery

It is better to sew covers using patterns that have already been prepared in advance. When this is not possible, you can, instead, apply the fabric to different elements and immediately stitch it, or make the task easier and cover it by tucking it in at the corners, but this method is not reliable. It is better to entrust the matter to professionals and contact a studio where they will do all the work for you.

After all this, the easiest thing is to assemble. It will only take 2-3 days of diligent work.

When assembling a sofa with their own hands for a summer residence, people want to use any available materials without much expense. Then, cheap or unnecessary parts can serve as a replacement for expensive ones. As a result, it turns out to combine original design, style and functionality are the result.

For example, you can take wooden pallets. They sell for pennies on construction markets, For example. Used pallets should be thoroughly cleaned and washed. Then, it is advisable to sand even new panels and, if necessary, treat them with a moisture-repellent primer or paint them.

It’s not at all difficult to assemble a sofa from furniture panels. You just need to cut them with a jigsaw, measure the appropriate dimensions, and fasten them with self-tapping screws. After, cover paint coating and let dry. In the end, all that remains is to make soft seats.

An unusual design move would be to make it from an old, used bathtub. To do this, you need to remove the legs from it, clean the surface of paint, cut off one wall using a grinder and sand the unevenness.

The entire product is painted, the legs, treated separately, are returned to their place. All that remains is to attach the seat and, if desired, decorate the walls with soft components.

Photos of sofas with your own hands

Cozy living room with a sofa and an armchair for relaxing after a hard day

Where we like to relax after a busy day working day? That's right, on a sofa or a soft comfortable chair, sitting in front of the TV with a cup of hot tea. Sofas are now a popular piece of furniture; there is quite a large selection in stores. Designers are coming up with more and more new models. Those who follow fashion and who have the means can change the sofa for a new one. What should we do for those who are tight on finances but want to change, or are used to an old, comfortable model, but the upholstery is already worn out?

Favorite chair after reupholstery and replacement of old upholstery

For skilled people who have carried out repairs at home or changed upholstery material, making upholstered furniture on their own will not be difficult. For those who are new to this business, those who do not have certain skills, it will, of course, be quite difficult.

Beautiful new case soft sofa with your own hands

Beautiful and comfortable upholstered furniture with your own hands

Making furniture at home is a fascinating and, most importantly, exciting process. If you had the desire and imagination, not only a sofa, but also other interesting and unusual upholstered furniture would appear in the house.

Sofa made of pallets with soft seats for country interior

Making upholstered furniture with your own hands has a lot of positive points or, in other words, advantages:

• You will bring the most unusual design ideas to life.
• This work is entertaining and allows you to gain skills in this interesting business.
• Allows you to save your family budget. Furniture you make yourself will cost significantly less if you bought it in a store.
• The finished design will be of high quality, since you choose the material and components yourself.
• you will create original item, which will fully correspond to the interior.
• The size will fit a specific place in the room.
• In case of wear or other defects, you can easily replace the upholstery material.
• Upon completion of the work, you will feel inner satisfaction from what you have done.
• Original furniture will become your pride. You will make upholstered furniture not only for family and friends, who knows, maybe in the future you will open your own business.

Soft round large pouf, made by yourself

Deciding on design and construction

Frame for non-standard corner sofa self-made

Before you start making your masterpiece, take a closer look at the interior of the room, think about what model you would like to make. Maybe it will be of an unusual design or you are planning to create a sofa bed. Do you just want a cozy corner where you can sit and relax, comfortably ensconced on the sofa. In general, you need to decide what purpose the future furniture will have. Will the design include furniture elements such as armrests (you can make them in the form of shelves), drawers(or there is supposed to be a box inside for storing bedding), folding mechanisms. Based on the overall design of the room, it is necessary to select upholstery material and decide on the filling.

Types and colors of fabrics for upholstery

Fillers for upholstered furniture made by yourself

Do you know how to make drawings correctly? Draw on paper the future sofa and diagrams of the necessary elements. This will make it much easier to make an estimate and understand how much material will be needed.

Drawing and 3D model of the future sofa

What you need for work

Basic principles of making upholstered furniture

Original do-it-yourself sofa made of pallets with a soft back

When making upholstered furniture with your own hands, you must adhere to some principles:

• Firstly, the quality of the future design. You independently choose the material, folding mechanism, fittings, filling, upholstery material, and create the furniture yourself. Thus, you get reliable upholstered furniture that meets the requirements and will last long enough. for a long time without any damage.
• Secondly, a sofa or other piece of furniture should be impeccable in shape, but at the same time simple. This will make the manufacturing work practical, less painstaking, spending a minimum of time and materials, and in the future will significantly simplify the repair and replacement of parts.
• Thirdly, ergonomic indicators. They determine the relationship between the structure and the physical build of a person, his weight and general hygiene requirements - convenient and basic care for furniture.
• Fourthly, to meet general aesthetic demands - to be not just a comfortable piece of furniture, but to fit harmoniously into the overall environment, to match other furniture, fashion, and style.
• Fifth, meet environmental requirements. In the manufacture of upholstered furniture, materials that do not contain harmful substances or containing their lowest indicator.

The process of making upholstered furniture with your own hands

We create furniture upholstery

Palette for choosing materials for upholstery

Before you start upholstering furniture, you need to decide on the material - leather or fabric. Financial capabilities also influence the choice. You should not choose leatherette - it will not last long. Remember the rules: furniture elements must be covered with fabric before you begin to assemble the structure; when cutting, you need to take into account allowances for hems (about two centimeters); Before you start cutting the material, make blanks.

Drawing of a frameless sofa chair for self-production

Having made the necessary measurements, we calculate the required length and width of the material. To make the upholstery last a long time, choose dense fabrics - chenille, tapestry, jacquard. They are better suited for work. We lay out the blanks on the selected material, outline them with chalk, not forgetting about the allowances, and cut them out. In this way we make patterns for the back, armrests, and back wall. Sew on sewing machine and put it on the furniture elements, then we assemble the entire structure. Cushions on the sofa are sewn in the same way.

Elements of cut parts for upholstery of furniture

The final stage is decoration

Large bed with soft headboard and soft upholstery, made by yourself

Decoration is one of best options give the atmosphere uniqueness, elegance, update the interior. If you have the desire and imagination, you can easily do this work yourself, without the help of designers.

Beautiful covers and pillows to decorate a soft corner

Nowadays, the decoupage technique is widely used - using thin napkins, you apply various patterns and designs to the surface of furniture.

The idea of ​​decorating furniture using improvised means using the decoupage technique

Replacing the filling and fabric for a chic antique chair

If the upholstery is outdated or has become unusable, you can sew new covers and make decorative pillows. It is necessary to choose the fabric for upholstery carefully - it should not fade or smell strongly, and the pile should not fall off. In fact, there is nothing difficult in choosing. To make the furniture look impressive, partner fabrics of a single color are chosen for upholstery. They are used to upholster the armrests and bottom lines; for other parts, fabric with a picture or a different color is used. To reduce fabric consumption, choose a material that is plain or has a small pattern.

An example of decorating upholstered furniture using covers

Filling plays an important role in decorating upholstered furniture. If it has lost its elasticity and sagged, it must be replaced so that the furniture is not only beautiful, but also comfortable. Inexpensive materials include foam rubber, batting and padding polyester. The last option is the most common; using it as a filler, you will decorate the furniture for a short time. A high-quality padding polyester should be of the same thickness, fairly dense and odorless. Foam rubber is no less popular; it must have a fine-porous structure. If, when pressed, it is instantly restored, then such a filler will last quite a long time.

If the upholstery on your favorite sofa has become worn out or stains have appeared on it that cannot be gotten rid of, but you feel sorry for throwing it away, since the furniture is still quite strong and can last for many more years, then you can reupholster it by buying another fabric. If this work is difficult for you, but you sew well, then why not make new covers yourself, you can add drapery elements. If they get dirty, they can simply be removed and washed.

When choosing a material, take into account the general environment, interior style and, of course, your taste. It is better if you use fabrics of soft colors and sublime shades for decoration. The fittings must match the color of the material. By decorating furniture with your own hands, you will give it a second life, and the decor in the house will be original and unique.

Restoration and renovation of a comfortable and familiar soft chair

Video: making a sofa with your own hands, how to make a sofa with your own hands