Projects of baths with a terrace (veranda). Bathhouse projects with a relaxation room and a terrace: the best options with photos Bathhouse projects for guest houses with a veranda and terrace

We advise you to plan construction several steps ahead - if you decide to install a bathhouse, immediately think about the gazebo. Anyway, sooner or later it will have to be built. Bathhouse with a gazebo under one roof – great option. The desired result is achieved much cheaper and faster.

It is necessary to make a few explanations about what a bathhouse with a gazebo under one roof is from the point of view of architects.

Gazebo – separately standing lung a building that does not have main walls, bearing structures– vertical racks. May have different geometric shape, from a rectangle or square to a hexagon or circle. There are almost no restrictions on size; the walls can be covered with decorative grilles or be completely open. Barbecues, barbecues or stoves are placed inside.

If such a gazebo is placed under the same roof as a bathhouse, then the structure should correctly be called not a bathhouse with a gazebo, but a bathhouse with a terrace or veranda. But in colloquial speech you can come across the name “sauna with a gazebo under one roof.” And in this article we will use this “folk” name.

Despite the fact that there are many options for building a bathhouse with a gazebo under one roof, they all have common advantages.

The ability to increase the therapeutic effect of a steam room by staying in the fresh air. To do this, there is no need to move from one separate building to another; immediately after leaving the bathhouse, you can comfortably sit in the gazebo.

The laying of utilities is much simplified. The lighting is powered from one power cable, a common distribution board is installed in two buildings, and energy consumers are connected to the same RCD.

Saves space summer cottage, issues are resolved with the choice of the most suitable location, taking into account the characteristics of the landscape and physical indicators soils.

Significant savings financial resources. Construction of a bathhouse with a gazebo under one roof costs 30% less than both buildings with the same characteristics separately.

Construction of a separate complex will cost 30 percent more

Add to these advantages significant time savings, the ability to complete everything in one season construction works, put things in order on the site and you will have no doubts about how to develop your summer cottage site.

Brief overview of projects

Project No. 1. Bathhouse with gazebo and covered passage

A very beautiful and functional solution. The bathhouse and gazebo are built on a shallow reinforced strip foundation - the integrity of the structure is guaranteed and the likelihood of problems arising in the roof valleys is eliminated.

For all buildings, valleys are considered the most problematic places, and if in these places there is even a slight displacement of the elements of the rafter system, then the risks of leaks increase significantly. The project is quite expensive and complex, the roof of the gazebo is multi-level with big amount stingrays various shapes and tilt angles. The dimensions of the bathhouse are 4x5 meters, the transition is 1.5x2 meters, the hexagonal gazebo with a diagonal size of 2.5 meters. Next to the gazebo there is a firewood storage room.

Project No. 2. Bathhouse with a hexagonal gazebo

Bathhouse with hexagonal gazebo

Has a warm WC, washroom, steam room and relaxation room. Dimensions 5x9.38 meters. Bathhouse material - foam blocks, external finishing walls - cement-sand plaster.

The interior spaces are lined with natural clapboard. A barbecue is attached near the wall, half of the roof of the gazebo is gable, the other half has hexagonal slopes. There is no separate transition - the consumption of building materials is reduced.

Project No. 3. Bathhouse with a gazebo under an elongated gable roof

Construction material – rounded logs, rafter system uniform, made to universal sizes. The roof of the gazebo rests on separate vertical posts.

The gazebo has a stone stove for cooking, which allows it to be used as a kitchen in the summer. Below we will talk in more detail about the methods of constructing a combined roof; in our opinion, many developers can choose this project option. In the meantime, check out a few more interesting projects of bathhouses with gazebos under one roof.

Project No. 4. Bathhouse with gazebo and barbecue

A rather expensive project, but very functional and beautiful, it can serve as decoration for an entire suburban area. The second floor of the bathhouse is attic, with a terrace at the end. On the same site as the gazebo there is a barbecue and a woodshed. This version of the bathhouse can be used as a residential country house.

Project No. 5. Bathhouse with a gazebo under one slope

One of the simplest projects from an architectural point of view, in terms of price it belongs to the “budget” option. The gazebo measures 2.6x6.0 meters, which allows you to place a barbecue, barbecue or summer Russian stove for cooking in it.

Video - Successful designs for a bathhouse with a gazebo

We’ll talk about the third project, tell you how to build a rafter system correctly, what criteria to use to select building materials and the type of foundation.

How to build a truss system for a bathhouse with a gazebo under an elongated gable roof (project No. 3)

The dimensions of the gazebo are 4×4.1 meters, the roof is gable, the vertical supports are made of timber 150×150 mm, the foundations for the vertical posts are columnar. When building a bathhouse with a gazebo under one roof, pay special attention to the quality of the foundations. A reinforced strip foundation was built under the bathhouse, and a columnar foundation was built under the gazebo. They are not connected into a single structure; each works separately.

The overall gable roof has quite big sizes, the length of the roof over the gazebo is 4 meters. This is a significant overhang over the bathhouse; a change in the vertical position of the rafter system near one wall by just 1 centimeter causes a change in the horizontal above the end of the gazebo by 3÷4 centimeters, this is a lot for any roof. During the construction of foundations, every effort must be made to completely eliminate seasonal fluctuations. It is advisable to make the depth of the foundation (strip and columnar) below the level of soil freezing in winter.

If you choose shallow foundations, then strictly follow building codes. The depth of the tape cannot be lower than 80 cm, the thickness of the sand cushion must not be less than 20 cm.

To reinforce the tape, you need to take construction reinforcement of a periodic profile Ø 10 mm or more.

Fittings and reinforcement according to SNiP

Another important point. After building the foundations, give them time to settle naturally. To control the amount of shrinkage, make vertical marks on the tape and posts. After a certain time, check their position using a water level; if they have moved, make new marks. It is recommended to begin construction only after the shrinkage of the foundations has completely stopped.

Columnar foundations must have anchors for fixing vertical posts; the width of the columns is at least 40x40 centimeters. If there are violations in the foundation construction technology, then during the operation of a bathhouse with a gazebo under one roof, big troubles will arise.

Prices for asbestos-cement pipes

asbestos cement pipes

And one last thing. Wooden sauna also shrinks; depending on the insulation material, the moisture content of the timber and the parameters of the building, shrinkage can be up to 0.7 centimeters per meter of height. The vertical pillars of the roof above the gazebo, of course, do not have such shrinkage; the Mauerlats will bend very much with all negative consequences. To prevent this from happening, you need to give time for the log house to completely shrink, and this will take at least one year. By the way, while the log house is settling, the foundation will also “calm down”.

Stages of construction of a rafter system over a bathhouse and gazebo

Step 1. Preparation of materials for the rafter system. For the rafter system, you need to purchase 150×150 mm timber for the mauerlats, 50×150 mm boards for the rafters and 50×100 mm boards for the crossbars and tie-downs.

In our case, we choose simple rafter systems with crossbars and tie rods. To increase the strength of the structure, you can install ridge beams, headstocks and struts over the bathhouse. Such a design will not be superfluous; it will take on part of the load and will not allow deformation of the rafter system above the gazebo.

Step 2. Taking dimensions and calculating the number of rafters. According to the project, the width of the bathhouse and gazebo is 4 meters, the slope of the slopes is assumed to be 20°, this figure is satisfactory for middle zone our country. If you live in regions with heavy snow cover, then the slope of the slopes should be increased. The distance between the rafters is 80 centimeters, given the length of the bathhouse with an attic of 9.5 meters, 12 pairs will be needed rafter legs. The length of each rafter, taking into account the overhang, is 4.5 meters; in total, the building will need (4.5 + 4.5) × 12 = 108 linear meters of 50 × 150 mm boards to create rafter legs.

You need to buy with a reserve, increase this amount by 5÷10%. The exact amount of materials depends on their quality and your skill. Keep in mind that the boards of the rafter system must be at least first grade; the presence of deep cracks, natural defects and rotten knots is completely prohibited.

Important. When purchasing lumber, pay attention to the conditions and method of storage. Incorrectly stacked stacks can cause significant curvature of the boards - such material is not suitable for the construction of a rafter system. Inspect each board edgewise to make sure the surface is straight.

The standard length of the boards is 6 meters, which means that the boards will need to be cut. Sections 1.5 meters long will not go to waste; they can be connected and used for tightening.

Even ordinary connections can withstand high tensile forces, and these are the forces that act on tightening. Using the same scheme, calculate the remaining lumber for the rafter system.

Used as roof covering flexible tiles made of modified bitumen; a continuous sheathing is made of moisture-resistant plywood or OSB boards. For lathing, take the cheapest unedged boards, just remove the bark.

Prices for OSB boards

OSB boards

Step 3. Installation of the Mauerlat. For the Mauerlat, you need to use a 150x150 mm beam; it is attached to the upper rims of the bathhouse with metal dowels, the distance between the dowels is within one meter. The dowel must hold at least two crowns of the log house.

Before installing the Mauerlat, be sure to check the height of all vertical supports around the perimeter of the gazebo. The ends must lie in a strictly horizontal position and in the same plane. To check, you need to use a hydraulic level or laser level. If deviations are found, they need to be eliminated.

Vertical supports are connected to columnar foundations with anchors. For anchors, both reinforcement bars and pieces of wire rod are used. The anchor must be concreted into the foundation to a depth of at least 15 centimeters.

Start laying the mauerlats from the side of the gazebo; connecting the beams along the length can only be done above the bathhouse. It is easier to connect with a cut in half a tree; the connection point is fixed with self-tapping screws, nails, bolts or metal staples. During work, constantly monitor the distance between the opposite Mauerlats and their position in the horizontal plane. The more accurately the mauerlats are laid, the more reliable the rafter system will be and the less time it will take to build it.

Video - An example of building a bathhouse from timber with a terrace (part 1)

Step 4.

The roof of the bathhouse with a gazebo does not have any fractures or changes in the angle of inclination; all rafters are completely identical. This allows you to prepare elements according to a template. The template is made from ordinary boards, the nodes are connected with nails. Carry out the work carefully and slowly, mistakes are too expensive.

Important. We strongly recommend checking the template along the entire length of the bath. Lift it to the bathhouse, place it in the desired position and walk along the entire length of the building. Mark the places where you need to slightly increase or decrease the distance between the rafter legs, stop at the average value. The average value will give you the opportunity to make all the rafters the same size, and make fine adjustments while fixing the elements. On the template, make notch marks for connection to the Mauerlat.

Step 5. Solve the issue of building a rafter system over the gazebo. There is a ceiling above the bathhouse; builders can walk on it; materials are stored in the attic. The gazebo does not have a ceiling; therefore, before starting construction of the rafter system, it will be necessary to install factory scaffolding or make them yourself. Both options are equivalent in effectiveness; if possible, it is better to borrow wood for a while. If this is not possible, you will be forced to waste time making them. When working on scaffolding, follow safety regulations.

Scaffolding – photo

Step 6. Raise the prepared rafter legs onto the roof of the bathhouse. To install the rafters you will need Additional materials for installing tie rods, special tools, fixtures and hardware for fixing rafter legs. In addition, pieces of boards are needed for their temporary fixation.

Step 7, check their placement, fix them in the desired position with temporary supports. To increase the stability of the rafter system, use metal corners on self-tapping screws. Stretch ropes between the outer rafters and, one by one, install all the remaining elements of the rafter system along them. Do not forget to temporarily tie the rafters together with boards; after installing the sheathing, they will be removed. Nail the boards from below so that they do not interfere with the lathing under the roofing.

Step 8 horizontal tightening, it is more reliable to connect them with bolts. Drill holes in the rafters and tie rods, insert bolts of the required length and tighten the nuts tightly. To increase the contact area of ​​the bolt head and nut, use large diameter washers.

You cannot make the rafter system yourself; you need to involve at least two assistants in the work. Try to find those who have personal experience construction of a rafter system (even as a helper) or, in extreme cases, saw how real masters do it.

Check all dimensions, spatial position of elements and reliability of loaded critical components. Everything is fine - the rafter system is ready, you can start lathing and covering the roof.

Video - Construction of a gable roof

Installation of sheathing under soft tiles

Lathing under soft roof- installation

Sheets of plywood or OSB are mounted on a sheathing of boards or slats. The distances between slats are within 50 centimeters. Start nailing lumber from the bottom; make templates to control the distances. If a lot of time has passed between the installation of the rafters and the installation of the sheathing, then you should check their position. As always, use tension between the outer rafters to do this. The plywood is fastened to the sheathing with nails, fastening also starts from the bottom up. After finishing the work, use a saw to trim the sheathing along the same line from the side of the gables.

Prices for soft tiles

soft tiles

Video - Construction of a bathhouse from timber (part 2)

What to pay extra attention to

As can be seen from the project, the distance between the vertical supports of the gazebo is from two to four meters. Such remoteness makes them unstable; it is necessary to take a set of additional measures to increase the rigidity of the supporting structure of the rafter system.

Connect the supports at the top of the gazebo together with 50x100 mm boards. Before this, the lumber should be passed through a surface planer, sanded to roughness and coated with a weather-resistant varnish.

The connection between the vertical supports of the gazebo and the boards can be done with long wood bolts; choose galvanized hardware. It is better to recess the heads and seal the holes with putty to match the lumber.

If, even after additional fastening of the supports, their stability is in doubt, install inclined corner supports. In the future, these supports can serve as a frame for the construction of decorative fences for the gazebo.

— functional area for complete relaxation. She may have different size, be built of timber or brick. For your attention - various projects of such buildings with photos.

When planning to set up a place to relax in their garden plot, many owners dream of making it not only comfortable, but also universal. After all, it should be to the liking of all family members. And you also need to please the guests, fully providing them with entertainment and complete relaxation in the fresh air. A bathhouse project with a terrace and barbecue, as well as a relaxation room, is a good option for such a case. It allows you to realize various ideas and combine them into your own mini-dacha complex.

Plan of a bathhouse with a terrace

There are many advantages to such a 4 in 1 project:

1. Saving territory. There is no need to waste space not only on the buildings themselves, but also on the paths connecting one building to another.
2. Reduced construction costs. For example, the wall of a bathhouse can simultaneously be the wall of a terrace. In addition, one roof will cost much less than several.
3. Organization of comprehensive recreation. You can take a steam bath and then cook dinner using the barbecue - everything is nearby.
4. Single style. Often, when constructing individual buildings, owners forget that all buildings must be in harmony with each other. In a combined project, this design issue is resolved very simply.

Types of bathhouse projects with a relaxation area

The choice of project is largely due to the size land plot. For example, classic version a bathhouse with a terrace measuring 6 x 9 m is suitable for owners of a large area. It will accommodate not only the whole family, but also a large group of friends. In this case, a common foundation is provided for the bathhouse and terrace. If you make the building two-story, then you can place a steam room and barbecue below, and arrange a guest lounge on the second floor.

If you want to attach a bathhouse to your house, use the 6 x 6 project. Thanks to its proportions, it will fit perfectly into the design of any area. This way you will significantly expand the area of ​​the house and get a cozy open place to relax. It is ideal for enjoying fresh air directly from the cottage in any weather.

Compact on the outside, but roomy on the inside, this is a corner bathhouse with a terrace. Often such a project is used in cases where it is necessary to locate a recreation area in close proximity to the house. The terrace adjacent to the cottage can be square or rectangular. However, photos of finished baths confirm that it is the corner platform that allows you to give the entire structure a complete look, as well as effectively manage the territory of your personal plot. Everything can be placed on the ground floor.

Advice. Two-story buildings are optimal if you want to properly plan the area of ​​your land plot and intend to continue construction. For example, add another guest room over time.

Nowadays, entire bathhouse cottages with various extensions, including a terrace, are also popular. On it you can arrange a gazebo, a playground for children, a place for barbecue or dancing. It is convenient to receive and accommodate guests, organize holidays and simply live in the fresh air. To prevent mosquitoes from annoying you in the summer, hang nets or decorative curtains.

Construction planning: timber or brick. Which foundation is better

To implement your favorite bathhouse project with a terrace and barbecue, you need to think carefully about what material to build from. Perhaps one of the best is timber. Its advantages are obvious:

• holds heat well, so additional insulation is not required;
• creates an inimitable “bathhouse” atmosphere, because for a long time people have been steaming in wooden buildings;
• regulates indoor humidity. This is possible due to the fact that wood “breathes”;
• allows you to implement non-standard architectural solutions;
• environmental friendliness. It has been proven that wood enhances the healing effect of a bath.

Among the disadvantages, it is worth noting the susceptibility of timber to mold, as well as its low reliability in terms of fire safety.

Attention! Glued laminated timber and logs are different building materials. The first one is cheaper. Logs can be rounded, planed, etc.

Brick baths are less fire hazardous, but they take longer to warm up, consuming a large number of fuel. In addition, in such buildings, quality is required. Without it, condensation collects inside, which can cause mold and mildew. Speaking about the advantages of brick, it is necessary to note its environmental friendliness, long service life and the ability to erect a building of almost any shape, which is proven by photos of already erected buildings. It is important that the cost brick baths lower than wooden ones, and they do not require external finishing.

Advice. To build a bathhouse, you can take other materials, for example, gas silicate blocks. Popular and frame houses, which are inexpensive and can be built quickly.

Depending on the project and building material For its implementation, the basis of the bathhouse is planned - the foundation. He can be:

1. Screw. For it, special piles are used on which the structure will stand. Suitable for almost all soil types. Does not require preparatory earthworks. It can be built quickly (in 1-3 days) and at any time of the year.
2. Columnar. This is the simplest of all types of foundation, and also the most economical. It can be used to build a small bathhouse with a terrace.
3. Tape. The work on its construction is considered quite labor-intensive, so it is advisable to resort to this option in the following cases:

• if your site has complex soil - for example, clay or sand;
• It is planned to build a two-story bathhouse.

Attention! Since a bathhouse is heavier than a terrace, different foundations are usually laid under them.

Tips for designing a recreation area with a sauna, barbecue and terrace

• When planning construction, consider the main wind direction. The bathhouse should cover the terrace from drafts. This is also necessary in order to correctly position the barbecue - it is not very convenient when smoke flies towards vacationers.
• Decide why you need a terrace. If in order to hide on a hot day from sun rays, don't choose the south. If you are going to sunbathe, design the location of the terrace on the sunny side.

• A terrace in its classic form does not have a roof, but for convenience and protection from bad weather it can be covered, for example, with transparent polycarbonate.
• Regardless of the area of ​​the finished bathhouse, it is necessary to provide for the location of 3 separate rooms: a locker room, a shower room and a steam room.
• To build a barbecue, you should use refractory bricks. In addition, for better fire safety, you can lay out the area around it with ceramic or stone tiles. It is also necessary to make a separate chimney for the barbecue.
• If you plan to use a sauna with a terrace all year round, take care of heating.

Bathhouse with barbecue area: video

IN modern conditions the concept of a “Russian bath” has expanded from a simple place for ablution into a complex with wide functionality, which includes various types of relaxation. In this regard, projects of bathhouses with a terrace and barbecue have become in demand (photos are presented on the page).

This solution allows you to significantly save space in your garden or dacha area. A bathhouse with a terrace under one roof is being sold in different projects, which ultimately allows you to get a comfortable outdoor seating area where you can enjoy food, drinks and communication.

The relevance of the location of the bath complex

A terrace is usually called an open-type extension adjacent to the main building. This site has the following characteristics:

• It has reliable roof, protecting from possible precipitation;
• to a certain extent protected from the wind on some sides;
• the space has a solid floor made of wood or tiles;
• This area contains furniture in the form of benches, chairs, rocking chairs, and dining tables.

Popular bathhouse designs with an attic and terrace include a cooking area over an open fire:

• open grill;
• B-B-Q;
• stationary stone stove, etc.

The fencing of this site is in most cases used in decorative form and can have a height of about 1 meter from floor level or cover the space from floor to ceiling with rare decorative grille with large gaps.

Individual features of projects

Various architectural bureaus offer many options for bathhouse designs with a terrace. Each of them is based on certain requirements regarding the materials used, location and installation methods. This is due to the fact that there are 6x4 bathhouse projects with a terrace or a 6x6 bathhouse project with a terrace that require a certain allocated area for them.

To enter the terrace there is a small porch with three steps. The site itself is quite spacious. And it can easily accommodate an oven with a grill or a barbecue area.

In such an area you can comfortably accommodate even several guests. In this case, certain nuances of the location of the open extension are taken into account:

• The design of a bathhouse with a large terrace and barbecue may involve the location of an open area along the largest wall of the building or at the end of the building near the exit.

• In some cases, in small areas, dressing room space is sacrificed in bathhouse designs with a rest room on the second floor and a terrace next to the building. This approach will also save not only space, but also money on the materials used.
• An original decorative fence will mark the perimeter of the recreation area under a canopy in bathhouse projects with a large terrace.
• When drawing up a site plan for installing a stove or barbecue, it is necessary to provide a reliable smoke exhaust system so that combustion products do not create discomfort on the site.
• For the project of a corner bathhouse with a terrace, a barbecue area is allocated in the far corner, and smoke is removed through a pipe leading out of the roof.

Decorating the terrace

Projects frame baths with a terrace are often divided into two types according to the way they design the open area:

• completely open terrace area;
• the presence of dense hinged fabric screens;
• the use of sliding structures using glass or transparent polycarbonate.

The possibility provided in the design of one-story bathhouses with a terrace to hermetically close and open the space using window modules makes it possible to use this area practically all year round.

Removable elements made of polycarbonate or glass can be stowed away summer time into the pantry to open up the space in front of those relaxing on the terrace.

Using an open stove or barbecue

In those bathhouse projects with a kitchen and terrace where the use of a barbecue or barbecue is expected, it is necessary to take into account the special conditions of cooking areas over an open fire.

• Installation stationary oven often held away from the main recreation area.
• It is advisable to provide shelter for the food preparation area from possible bad weather in the form of precipitation or wind.
• Mobile barbecues must be located in a fireproof place on a flat surface.
• Individual decoration of the stove will highlight the design feature of the terrace.
• In cool weather, a stationary stove becomes an additional source of heat for vacationers in the open summer area.

Popular projects

If there is sufficient space on the site, it is possible to implement projects of bathhouses made of rounded logs with a terrace in the form of a small health complex. Such a site will be enough for almost any company of two or three families.

The territory accommodates not only a bathhouse with a steam room, but also a relaxation room. There is a terrace along the longitudinal wall. It is open and includes a barbecue oven. This project of a bath house with a terrace assumes the presence of two entrances to the site: from the back and from the front.

The spacious hall is equipped with a pair of spacious wardrobes, which contain some useful bath equipment and things for changing clothes. There are three further exits from this area:

• to the toilet, where there is a dormer window with natural light;
• to the shower-washing room, after which there is a steam room;
• to the living room, where there are all the conditions for a cozy pastime.

This arrangement allows you to intelligently manage the space and provides all the opportunities for comfortable movement around the bathhouse. The living room and the terrace are separated by a huge glass window. It can be done in panoramic format. This solution will provide more light to the room and visually expand the terrace area.

Convenient location of the recreation area

The close location of the open seating area and living room will allow you to move between these spaces at any time if the weather may worsen or improve.

Some designs of a bath house with an attic and a terrace provide for the installation of a staircase to the second floor from the terrace side. This will save space inside the building.

More examples of bathhouse projects with a terrace and barbecue:

Spacious bathhouse with auxiliary rooms. The bathhouse is surrounded by a spacious view balcony. 2 porches - separately for the terrace and separately for the bathhouse

VIDEO: Bathhouse made of 4.5 by 5 timber with a terrace

A bathhouse with a veranda is an excellent option for summer holiday! Obviously, it’s more pleasant to relax between visits to the steam room in nature, enjoying clean air And beautiful scenery rather than sitting indoors. Of course, the best option is to choose a project and build them at the same time, but this does not always happen.

There are often cases when there is no money for the construction of a veranda at the time of construction of the bathhouse, so you have to install it later, having collected the necessary financial resources. Over time, some people like to expand the total area of ​​the building by installing a veranda or terrace.

Do-it-yourself veranda for a bathhouse: projects, photos, ideas

The veranda is a building that can be accessed from the bathhouse and from the street. It happens different forms: square, rectangular, U-shaped, etc. It does not have to have even corners; a round veranda will look original. But keep in mind that its construction will be much more difficult.

The easiest option to make a veranda is to attach it to the house. The advantage of this arrangement is that for its construction you will need less materials, because one of the walls will already be there - this is part of the bathhouse.

If you decide to attach a veranda to the wall of the house, then check that the wall is strong and reliable.

The traditional location of the veranda is in front front door. The advantages of such placement: you don’t have to change the layout, make an additional doorway, the veranda will fit organically into the interior and will be easy to use.

The veranda can “encircle” the bathhouse on several sides, in which case it will be quite spacious.

If on the site, in addition to the bathhouse, there is also a house located nearby, then great solution there will be a veranda connecting the two buildings. In this case, even on a rainy day you will be able to walk from the house to the bathhouse, remaining dry, the roof will protect you from bad weather.

If the bathhouse is located next to the road, then it is better to place the veranda in the courtyard so that you can relax in privacy and away from dust.

The plan of the veranda may vary. Some people limit themselves to a table and benches, while others make a full-fledged recreation area on the terrace. Here you can put sofas and armchairs, a plunge pool and even make a swimming pool!

If the area of ​​your veranda is large, then an excellent option would be to place a stove on the veranda and cook food on it.

If you choose a closed veranda, then in the summer it can be used as a guest room or bedroom. Then it is desirable that it has a bed or folding sofa, For example.

Step 2. Veranda walls

The walls of the veranda can be different: solid, partially closed, etc. If you are making a veranda as an extension to the bathhouse, then the walls will protect from the wind in any case, so it is better to make the remaining sides of the veranda open, then you can enjoy beautiful view.

If the veranda is a separate building, then it is better to make its walls higher to protect vacationers from drafts.

Curtains will help decorate the veranda and protect it from the wind.

There is an alternative option - glazed verandas. In this case, they will be warm, while you will have a view of the surrounding landscape. Glazing can be partial or complete.

Partial glazing, as the name implies, means that glass will occupy only part of the walls, and the other will be made of another material, for example, logs or bricks. This option is considered simpler.

Full glazing means that the walls consist of large windows connected to each other by a frame. The advantage is that there will always be light here during the day, and there will also be a panoramic view of the surrounding nature. But it is quite difficult to implement such an option with your own hands; it is better to turn to specialists.

When glazing the veranda, you need to make several windows with vents so that you can ventilate the room.

The simplest option is frame veranda. Its assembly begins with the lower trim, for which a beam of larger cross-section is used. For example, if you use 100x100 mm timber to build a veranda, then for the lower crown it is better to take 150x150 mm material. The wooden parts of the veranda must be treated with antiseptics to protect the wood from moisture and fungus.

During the construction of the extension, you need to ensure the evenness of the walls; starting from the first row, use a level.

Do not forget to decide on the location of window and doorways, if they are provided for in the project. If you are going to go to the bathhouse all year round, then it is better to place the door with south side- this will help avoid blocking the passage with snowdrifts.

Step 3. Veranda roof

The veranda may have a separate roof or a common one with the bathhouse. In case the pediment

Bathhouses made of timber do not lose their relevance. These one-story structures are known for their compactness and coziness, they are very functional and allow you to feel truly at one with nature. Such a structure is in no way inferior to spatial baths made of logs, as well as steam baths made of brick and other suitable material.

One-story wooden baths are one of the best jewelry landscape even in limited space. In addition, the construction of such a bathhouse will never be carried out to the detriment of the construction of the main structure.

Usually, when developing a standard project for a one-story bathhouse, three rooms are provided: a steam room, a shower room and a relaxation room. Depending on the location of the premises, their dimensions and the size of the bath itself, there are different designs the most unexpected layout. Key Feature one-story building consists of the presence of a landscaped terrace or veranda, which serves as an additional room for relaxation during the warm period. If the bathhouse has closed porch, then it may well serve as an excellent room for relaxation during the cold season.

The budget (high cost) of the project is determined by the absence (presence) of a porch or veranda, although such buildings in no way affect the functionality of the bathhouse and are only additional buildings.

Firms providing project development and implementation services claim the popularity of one-story bathhouses with a terrace, that is, with an auxiliary recreation area in the spring and summer. The terrace is landscaped using wooden railings and gratings with balusters, and its dimensions make it possible to arrange such interior elements as wicker chairs and a table, shelves for bath accessories. All these pieces of furniture are responsible for a comfortable and complete rest in the bathhouse for lovers of fresh air and natural splendor after the steam room.

In addition, the design of a one-story bathhouse may also include the construction of a guest house. In this case, the room where guests will live will be located right on the same territory as the bathhouse. Such a structure is multi-tasking, and this fact often pleases customers. In this situation, a closed terrace or veranda can easily be converted into a kitchen, and the recreation room turns into a full-fledged living space with furnished sleeping areas and leisure areas. Those living in such a bathhouse do not feel disadvantaged in either coziness, comfort, or certainly functionality.

You can talk for a long time about what one-story bathhouses made of logs and logs are ready to be offered by manufacturers today, which can surprise, if not amaze, the customer, but it is better to see with your own eyes the projects of standard buildings and to order (with additional premises), and also draw conclusions yourself. So, welcome to the world of one-story log bathhouse projects!

Project one-story house with an area of ​​35.7 m², combined with a steam room (5.8 m²), it carries the functionality of a furnished residential space and a steam room complex. This is a very popular construction option, which is in high demand among owners working in the field of tourism services, since such a structure will allow clients not only to enjoy bathing procedures, but also to relax in a spacious relaxation room (10.3 m²).

Bath house made of logs 35.7 m² (Fig. 4)

The design of the bath house (Fig. 5) combines a relaxation room with a kitchen, where everything is present required attributes(plate, workplace, table). The spacious, landscaped terrace will be an ideal place for guests to relax in warm weather.

Bath house project (Fig. 5)

This version of a bath house is considered attractive not only for an ordinary summer resident, but also for a successful person. There are several reasons:

• lack of stairs, which often “eat up” space;
• a house that combines two buildings (a residential building and a bathhouse) allows you to save on construction costs separately standing house, which ultimately allows for more efficient use of the site area.

A visualization of the bathhouse is shown in Fig. 6, 7, 8, 9 (Visualization).

Option 2

A typical project for a combined bathhouse and residential building is a practical and inexpensive building with an area of ​​29.2 m². A spacious steam room (5.0 m²) is combined with a shower room of 3.7 m², capable of accommodating at least 4 people. When calculating the approximate area of ​​the future building, it is necessary to take into account the minimum allowable footage for 1 person - at least 1 m². Based on this project, we conclude that this steam room can easily accommodate 4-5 people.

The one-story house successfully combines the functionality of a living space and a bathhouse: there is a spacious living room (11 m²) with a kitchen and sitting area, a separate bathroom, and a washing room (3.7 m²). The project provides for the presence of a vestibule and open terrace.

Bath house project (Fig. 11)

An interesting detail of this architectural design is the window frames, painted white, which gives the building a more solemn and elegant look.

Using visualization, you can examine the bath house in detail from all sides. Rice. 12, 13, 14, 15.

Visualization (Fig. 15)

Option 3

For true connoisseurs of the beauty of Russian architecture, a one-story bath house with an area of ​​49.7 m² will be a pleasant find. Attractive exterior architecture and convenient placement of premises are the merit of the original layout.

Bath house with an area of ​​49.7 m² (Fig. 16)

total area buildings - 49.7 m². Spacious lounge (11 m²) with large window and an open terrace (8.4 m²) provide complete relaxation for residents. From the terrace you can go into a small vestibule, from where there is an entrance to the rest room. From it you can first get into a shower room with an area of ​​3.7 m², and then into a steam room or a separate bathroom. The area of ​​the steam room is 5 m², which means it can easily fit 4-5 people.

Bath house project (Fig. 17)

An additional convenience of the presented one-story building is the open terrace, where you can place a table or benches, as well as barbecue facilities. In addition, the project provides for a kitchen-fireplace combined with a living space.

A visualization of the house is shown in Fig. 18, 19, 20, 21.

Visualization (Fig. 21)

Option 4

The next project is a comfortable bathhouse, which has only one floor and a total area of ​​42.2 m². The entire area is divided into six main zones: a living room combined with a well-equipped kitchen, a vestibule, a shower room with a separate toilet, a steam room (5.8 m²) and an open terrace, the size of which is comparable to a relaxation room (9 m²).

Bath house with an area of ​​42.2 m² (Fig. 22)

The bath house with an area of ​​42.2 m² (Fig. 21) fully corresponds to Russian traditions. Thanks to the gable roof, a small flight of stairs and a fenced spacious veranda, the building acquired a special coziness and sophistication. From the terrace you can get into the vestibule, and from there into the living room and shower room.

Bath house project (Fig. 23)

Convenient location of premises and attractive exterior architecture are the undeniable advantages of this project. What the structure looks like from different sides can be seen in Fig. 24, 25, 26, 27.

Visualization (Fig. 27)

Option 5

For those who prefer maximum functionality with a minimum of frills, the optimal option would be a log bath house with a total area of ​​40 m², shown in the figure. Such a compact and visually attractive building will be a great place for a relaxing holiday with friends, or a place for pleasant solitude against the backdrop of nature.

Log bath house 40 m² (Fig. 28)

The key feature of the project is that the customer is given the right to choose the construction material (rounded logs or hand-cut wood). An aesthetic and moderately democratic building will fit perfectly into any landscape and will look good in any corner of the site. The dimensions of the bath house allow it to be placed even in limited space. Well thought out and interior spaces: living room with kitchen (total area 10.5 m²), large washroom with separate bathroom, spacious steam room (6 m²), comfortable vestibule and terrace (7.4 m²), where a large company can easily fit at a festive table.

Bath house project (Fig. 29)

The convenient location of the premises inside the building, the compactness and presentability of the building are the undoubted advantages of this project. The original decoration of the veranda and snow-white window openings add a special solemnity to the bathhouse.

You can examine in detail a one-story bath house from all angles using the visualization in Fig. 30, 31, 32, 33.

Visualization (Fig. 33)

Option 6

A steam room or bathhouse is the place without which a full-fledged Russian holiday is unthinkable. At all times, serious requirements were placed on such buildings: the bathhouse must be comfortable, spacious, maximally functional and made of wood. Thanks to rounded coniferous logs, the bathhouse will quickly warm up and bring aesthetic pleasure.

Bath house with an area of ​​41.2 m² (Fig. 34)

The design of the bathhouse provides only one floor and a clear division into zones: an open terrace ready to welcome guests into the house, a huge recreation room with an adjacent kitchen (14.8 m²), shower room (3.4 m²), steam room (4.5 m² ), an isolated bathroom and a small vestibule, from which the virtual acquaintance with the house begins.

Bath house project (Fig. 35)

Competent architecture and rational engineering solutions allow you to fit a bath house into any garden plot, as well as build it near buildings of a wide variety of exteriors. Thanks to the treatment of logs with an antiseptic, the bathhouse will last for decades.

You can appreciate the attractiveness and sophistication of the structure from different angles by looking at Fig. 36, 37, 38, 39.

Visualization (Fig. 39)

Option 7

A well-known fact: one-story baths are very convenient to use, they are easier to maintain and repair if necessary.

The project of a one-story house with an area of ​​41.6 m², combined with a steam room (4.8 m²), carries the functionality of a furnished residential premises and a steam room complex. The peculiarity of this project is that one foundation is used to house the residential building and the bathhouse.

Bath house with an area of ​​41.6 m² (Fig. 40)

Everything a guest might need for a relaxing holiday in a hot bath and comfortable stay throughout the year - all this easily fit into 41.6 m². There is a spacious living room (14.6 m²), successfully combining a kitchen and a relaxation area, a separate bathroom, a washing room (3.4 m²) and a steam room (4.8 m²).

Bath house project (Fig. 41)

The project provides for a utility room (vestibule) and an open veranda. You can make sure that this project is the most successful architectural solution by examining the building in Fig. 42, 43, 44, 45.

Visualization (Fig. 45)

Option 8

The project of a log bath house is an excellent solution for arranging a small plot of land. Despite its compactness, the bathhouse combined a traditional Russian steam room (4.8 m²), a spacious relaxation room (14.6 m²), utility rooms, and even a cozy terrace. And all this was located on one floor in just a rectangle of 7.7 m by 5.4 m.

Bath house with an area of ​​41.6 m² (Fig. 46)

Restrained simplicity and conciseness, maximum functionality and amazing compactness - this bath house will be an excellent solution for those who value quality and convenience above all. All this does not prevent the structure from harmoniously fitting into the design of the site.

A comfortable stay in a house built from coniferous wood is guaranteed.

You can appreciate the attractiveness and sophistication of the structure from different angles by looking at Fig. 48, 49, 50, 51.

Option 9

The style of this project carries with it original Russian traditions and culture, this can be seen both in the architecture and in the decoration of the facade and its individual elements.

Construction with gable roof divided into several main areas: a spacious living room (15.4 m²), successfully combining a kitchen and a relaxation area, a separate bathroom, a washing room (3.7 m²) and a steam room (3.7 m²), designed for simultaneous stay of 2 people. 3 people. Each room has its own window (there are two in the living room), so we can’t really talk about a lack of light.

Everything here is very well thought out and extremely convenient: a flight of stairs leads to a spacious open terrace (9.2 m²). The door on the terrace leads to the vestibule, from where you can enter the relaxation room. Its area (15.4 m²) allows it to accommodate a fairly large company.
Visualization capabilities allow you to evaluate the attractiveness and style of a one-story bathhouse project. (Fig. 54, 55, 56, 57).

Option 10

Bath house with an area of ​​54.8 m² (Fig. 58).

Bath house with an area of ​​54.8 m² (Fig. 58)

Maximum functionality, beautiful, aesthetic appearance and the strength of the Russian spirit - this and much more is personified by the design of a one-story bath house, made of hand-cut logs or rounded logs. The total area of ​​the building is 54.8 m². Such space gives free rein to architects and designers. Focusing on the centuries-old traditions of the Russian people, the latter managed to make the project sound and comfortable for living. The living space and the bathhouse are located on the same foundation, which will allow the building to be located in any, even very limited space.

The interior spaces are also well thought out: a living room combined with a kitchen (total area 14.5 m²), shaped like a pentagon, a large washroom with a separate bathroom, a spacious steam room (6.1 m²), a comfortable vestibule and a terrace (7.4 m² ), where a large company can easily fit at the festive table.

You can evaluate the advantages of a one-story building thanks to the visualization capabilities (Fig. 60, 61, 62, 63).

Option 11

The sauna-house with an area of ​​55.4 m², shown in the figure, will be an excellent solution for those who prioritize reliability, quality and aesthetics. A one-story bathhouse made according to this project will fit perfectly into any landscape of a personal plot.

For its construction, rounded coniferous logs or hand-cut wood, which has beneficial properties. The total area of ​​the one-story bathhouse is 55.4 m², which allows you to accommodate a large company, where you can not only have a good rest in the spacious and bright living room (14.3 m²), but also take a steam bath in the comfortable steam room (5.5 m²). Nearby there is a washing room (5.7 m²) with a separate bathroom (2.5 m²).

The project provides for a utility room (vestibule) and an open terrace (12.1 m²) with a flight of stairs. You can make sure that this project is the most successful architectural solution for a true esthete by examining the building in Fig. 66, 67, 68, 69.

Video - Project of a one-story bathhouse VIP-2 with a large terrace and barbecue area

Video - Bathhouse with an ideal layout. Projects of one-story baths