How to stick plastic wall panels on the ceiling or walls in the bathroom: requirements for finishing materials, care after installation. Options for modern toilet decoration How to beautifully decorate a toilet in an apartment with plastic

If you decide to repair a toilet using plastic panels, do it yourself. Sheathing walls and ceilings with these materials is not at all difficult, and even a non-professional can do it. As a result you will get a large number of advantages, and the finishing itself will cost you several times less than using ceramic tiles.

DIY bathroom ceiling in 15 minutes

What is plastic lining?

Plastic panels intended for toilets are lining, which are lightweight and made of PVC materials. It can be used to decorate both walls and ceilings.

The outer surface of the lining is smooth, and can be matte, glossy and even mirrored. Large assortment of materials, availability of various color scheme, allows you to apply any design to decorate your bathroom. In this case, the plastic surface can be:

• white, matte;
• white, glossy;
• with imitation wood, marble and other expensive finishing materials;
• with a pattern that is applied to the surface using a special film.

Inside, these toilet modules have a porous structure. Their thickness ranges from 8 to 12 mm, length – from 2.5 to 6 m, and width – from 0.1 to 0.3 m. This variety allows you to apply any design when decorating a toilet.

Advantages and disadvantages of this material

Finishing the toilet with plastic panels allows you to get a large number of advantages:

The main disadvantage of this material is its low combustion resistance. Most often, plastic is not flammable. But when exposed to high temperature or fire, it begins to smolder and melt. This releases toxic gases that are very dangerous.

Also, finishing the toilet with plastic panels will steal at least 3-4 cm on each side. If there are large irregularities, the width of the room is reduced even more. Therefore, this material is not suitable for a bathroom with a small area.

What design solution can be used for the bathroom?

The design of the room when using plastic modules can be varied. This material can be used to cover all surfaces from the ceiling to the walls, as well as a small part of them. For example, install the panels on the wall from the floor to half the height of the wall. On the upper part you can apply cladding using putty. This way, you can easily clean the room. The lower part, which gets most dirty, can be easily cleaned using detergents and disinfectants.

You can also use modules that, after installation, form a pattern. In this way it is easy to create a cozy atmosphere using any room design. Panels that imitate expensive cladding made of wood, granite or stone look good. In this case, the design of the bathroom will be very successful.

Necessary materials

Repairing a toilet with plastic panels with your own hands is very simple. The design of the room needs to be thought out in advance, since the choice of specific materials depends on this.

In this case you need to purchase:

• required number of PVC panels;
• edging elements;
• accessories for surface decoration;
• slats for creating a frame - wooden, aluminum, plastic;
• dowels;
• self-tapping screws - you need to choose ones with wide heads at the rate of 2 pieces per 1 linear meter of profile.

It is also necessary to prepare tools that will help carry out installation as quickly and correctly as possible. To do this, take a building level, tape measure, jigsaw or hacksaw, screwdriver, drill.

Surface preparation

Before installing PVC modules, it is necessary to remove old finishing materials from the walls and ceiling. This will help increase usable area indoors, which decreases significantly subsequently.

Also be sure to repair the plumbing, sewer system and electrical wiring. Replace old pipes and cables, check the quality of connecting elements. This will help extend the life of the finish. In case it happens emergency situation, it will be necessary to completely dismantle some of the panels, which most often become unsuitable for further use.

To prevent the formation of fungus and mold on the surface of the walls, be sure to treat them with a primer. The design of the room must be thought out in advance, since additional strips need to be fixed in the place where the washbasin and cabinets are installed.

Frame installation

Making a frame for this design is very simple if you follow the following recommendations:

• When using wooden slats, treat them with an antiseptic solution. This is best done the day before installing the frame. Treat it outside with a liquid that prevents the formation of fungus and wait until it dries.
• Along the perimeter of the room, at a distance of 2-3 cm from the ceiling, you need to attach slats or a UD profile. In the latter case, you need to use dowel nails. Fasten the profile every 0.6-0.7 m.
• Fix the following slats in a horizontal position towards the floor. Install them every 0.5 m. Attach them to the wall in the same way using dowels.
• Install a U-shaped profile on top of the sheathing in the corners of the room.

Toilet lining

Making a reliable coating from plastic panels is very simple. Before installation, cut each element so that its length is 1-1.5 cm shorter than the height of the room. This shortage of material is compensated for by installing decorative strips.

The cladding process consists of the following stages:

• Install the starting panel in the desired place, while the narrow shelf should be inserted into the profile, which is located in the corner of the room.
• Using self-tapping screws, attach the panel to the frame at the location of the wide strip on the surface of the lining.
• Thus, install all plastic modules.
• Near doorways and additionally install finishing strips in the corners of the room.

Only after covering the walls can you begin installing the panels on the ceiling. Installation of the frame in this case is carried out in the same way. In this case, along the perimeter of the ceiling you need to attach a special strip for mounting the baseboard.

The panels are connected to each other using a special lock and screws to the frame. In this way, you can install the plastic lining in the toilet yourself.

Video: Design and finishing of a toilet with plastic

Repairing a toilet with plastic panels is the best option for those who want to make budget renovations in their apartment. This method has several advantages. Firstly, you can purchase a sufficient amount of inexpensive material. Secondly, it is very easy to install it yourself, which will save a lot of money on paying the craftsmen.

Plastic panels - features of choosing a reliable material

Before finishing the toilet, you need to choose quality panels. There is a huge range of these products on the market, but not all products meet the requirements of modern quality standards. It can be quite difficult for a buyer to visually determine the reliability and safety of the products offered. To prevent you from running into defective panels, we will tell you a few secrets. They will allow you to choose really high-quality material that will last for a long time.

PVC panels must contain additives designed to improve the elasticity of the material. Thanks to the presence of these components, the products are easily bent and are difficult to accidentally mechanical damage. If you are offered plastic that leaves dents when pressed with your finger, then you should refuse such products. This material is not able to last for a long time. In addition, within a year it will lose its original appearance.

To easily check the quality of the material, you should do the following. To begin, grab the edge of the panel with two fingers and lightly squeeze the product. As a result, the ribs that are inside should not be deformed or bent. In addition, no dents are allowed at the top or bottom of the panel. Then try to bend back the mounting strip of material. It is located on the edge of the product and forms a docking lock. As a result, this part of the material should not break or crack. In high-quality materials, it quickly returns to its previous position, and no traces remain on the bend lines.

To check, place the panel against your nose. The product must not emit any unpleasant odors. If you smell a strong chemical smell, it is better not to use such material for. Most likely, this plastic was created from cheap raw materials or with violations of technological production standards. If you buy these panels, the toilet finished with them will have bad smell, hazardous fumes.

In stores you can find panels of various widths. In small rooms, it is worth using products that are not too wide, since after work there will be a large amount of unusable waste. Therefore, in order not to guess with the desired batch of finishing, before making it, it is worth measuring them and calculating the required amount of material. Another important nuance when choosing a product, it is the presence of a certificate from the seller. The document must indicate the country of origin and the product’s compliance with all sanitary and technical standards.

How to buy material and take the necessary measurements?

To finish the toilet with plastic panels yourself without any problems, you need to prepare for the work. First of all, take all measurements and buy materials. Preparation of tools and surface treatment will also be a mandatory activity. The purpose of taking measurements is to find out how many panels will be needed for the job. At the same time, it is also important to count the number of profiles that will be useful for decorating external and internal corners. In addition, profiles will be needed to mount the panels to the floor and ceiling lines. Often these finishing elements are needed to install doors, windows and cabinets, if such work is also included in the planned renovation.

The choice of profiles directly depends on design idea, the size of the toilet and the technique of installing panels in some areas of the room. As for the base material, its quantity should be 15% more than the measurement result. Specific part will go to trimmings. Cases of improper cutting or accidental damage to the panels should not be ruled out.

Remember that you will also need material to install the sheathing. In most cases, homeowners need to save every centimeter of the apartment, so the toilet has small area. In this regard, wooden slats or a metal profile with a cross-section of 50x20 mm are suitable as a frame. To calculate the number of slats, you need to take into account that the guide battens will be located at a distance of 50–60 cm from each other. In addition, calculate the number of parts for the sheathing of the ceiling frame and the decorative box that will hide the pipes. But this is only if you plan to finish these areas of the toilet.

In order to secure the frame to the wall surface, you need to purchase dowels of such length that they can be screwed into the wall by 40–50 mm. To find out the number of fasteners, take into account that their pitch during installation will be 40–45 cm. To fix the panels to the frame, you need to purchase self-tapping screws no more than 20 mm long. If wooden slats are used as lathing, then for fixation it is better to use staples 10 mm long. If your toilet has perfectly smooth walls, then you don’t have to do the sheathing. In such situations plastic panels glue directly to the walls with liquid nails or tile adhesive.

Preparing the room - how to level the walls before finishing?

As with other types of renovation work, finishing a bathroom with plastic panels requires necessary tools. Having them at hand, you will not be distracted by searching the necessary equipment.To work you will need:

• screwdriver and a set of bits for it;
• electric drill or hammer drill;
• drills of different diameters;
• manual or electric jigsaw;
• scissors for working with metal, if a metal profile is used;
• stationery knife;
• hammer;
• square and tape measure;
• marker or pencil;
• stapler and building level.

To prepare the surfaces of the walls, you will also need a hair dryer, spatulas, a brush and a primer roller. Particular attention should be paid to the construction level. It must have a horizontal and vertical pointer. This tool will help to achieve the most even surface of the walls in the toilet. If you are going to specifically buy both a drill and a hammer drill, then you can get by with only one drill. It is important that it has a perforation function. Such a tool will cost a little more than a regular one, but you will save money on purchasing a separate hammer drill.

To level the walls in the toilet, you first need to remove all the old finish. This will help prevent mold and mildew from appearing in the space between. To remove old wallpaper or other types of trim, use a metal putty knife. If you need to clean the walls of worn wallpaper, but it has already firmly adhered to the surface, then you can apply it several times to the old finish for cleaning. hot water using a roller for this. You need to remove the material in those places where it has begun to separate from the wall. If the walls in the toilet were previously painted with paint, then it is not necessary to completely remove it from the surface before repairing. The main thing is to remove the dried compound where it has begun to flake off.

After cleaning the surfaces on the walls, make markings. This is necessary in order to determine the size and number of slats for the sheathing. If you chose wooden slats as the last option, then at the next stage prepare them for installation. First, they are cut to size, after which they are impregnated with an antiseptic composition. It is best to do this on the balcony or in any other room where there is a draft. While the slats are still wet, you can apply a primer to the walls and ceiling of the toilet. It is best to apply 2 layers of this composition. If you use a white primer, then marking the walls should be done only after the material has dried on the surface.

Making lathing - an option for uneven surfaces

Finishing the toilet with PVC panels is one of the last stages of indoor renovation. First of all, you will need to secure the batten guides. This should only be done on dry, smooth walls. Before installation, drill holes in the slats, the diameter of which will correspond to the diameters of the dowels. After this, the slats are applied to the markings. You need to insert a drill into each of the holes in the rail and mark the drilling locations in the wall. Then the lath is set aside, and the place marked in the wall is drilled to the length of the dowel.

To secure the strip, it must be attached again to the marking so that the holes in it and the wall coincide. After this, we take dowels with screws screwed in and drive them one by one into the walls through wooden guides. All elements of the sheathing are installed in a similar way.

Before covering the walls in the toilet with plastic panels, you need to make a decorative box. It is made of a metal profile and serves as a place where pipes and other communications will be hidden. To make the structure, install vertical racks under the ceiling so that they are located on the sides of the sewer riser. After this, the vertical elements are fastened with horizontal guides. To hide all the pipes, the frame of the box must run along the sides of the communications so that after installing the panels they are not visible.

Installation of panels - how to cover walls with plastic yourself?

Next we proceed to finishing the walls. It's best to start from the far corner. All vertical panels that are installed to repair a toilet must be leveled using a level. Only after this can they be screwed on. Remember that from correct position the first panel depends on how smoothly the other products will be screwed on!

If one or more walls in your toilet are perfectly flat, then there is no point in installing lathing on them. In such a situation, it is better to glue the panels directly to the surface. To do this, take liquid nails and apply them in a thin layer to cover the walls. After this, we apply plastic lining and, until the glue has dried, we align each of the panels. After finishing the walls, carefully install the material on the decorative box. To do this, take the first panel and attach it to the frame. We mark the cutting places and shorten the product along the indicated lines.

Next, we fasten the paneling with self-tapping screws and repeat the procedure with the rest of the material. In corners and joints, use special ones that will make the finish more neat. If finishing your toilet with plastic involves installing the material on the ceiling, then do not forget to make holes in the panels for the lights. If you use spotlights, then you need to cut out circles whose diameter will be the same as the diameter of the lamps. If you have a small lampshade, then the hole should be of such a size that you can insert the wires needed to connect the light bulb into it.

Not a single family in our country or abroad can do without such an important event as repairs. In any case, it is inevitable that it is necessary to carry out repair and finishing work, both in the bathroom and in the toilet. And here there is not such a wide variation in methods and materials as, for example, in a living room or bedroom, but even a small separate toilet can be turned into a stylish and cozy place.

Plastic panels for bathroom and toilet walls

Many have heard about wonderful and beautiful PVC panels that can be used both for the walls of a bathroom or toilet, and for the ceiling, and some types of such panels can also be laid on the floor surface. It all depends on the personal wishes of the person and his material capabilities.

On today's rich building material On the market you can find a wide range of types of plastic panels that can harmoniously decorate any bathroom and fit into the concept of almost any design.

Types of material:

• Wall panels made of plastic, decorated with a decorative frieze;
• Sheet type plastic panels;
• PVC panels imitating wood;
• Photo panels;
• Plastic panels with a laser-applied pattern;
• PVC panels with thermal printing.

Photo panels – decorative panels with photo printing applied on them. They allow you to create a design for wall panels with almost any image, be it a view of a fantasy world, a magnificent waterfall, or the face of an unloved boss.

It all depends on the wishes of the customer and the ideas of the design specialist.

Each of these types of panels for finishing a toilet or bathroom can be used in an interior of any complexity and theme, be it a hint of a Victorian house, or an imitation of Provence or Art Nouveau style.

Option for finishing a toilet with PVC panels: examples and photos

Despite the fact that many people have long seen what beauty can be created using plastic wall panels, what the most interesting and exclusive ideas can be brought to life, they still do not understand why friends or relatives gave their preference for this type of panel if there are many other materials, for example MDF panels.

The whole secret lies in the advantages of PVC panels over other decorative finishing materials for walls:

1. In the case of finishing toilet walls with plastic panels, a person does not face such a question as special preparation work surface walls The panels can be mounted even on not the smoothest surfaces. This, as practice shows, allows you to save material resources that are usually spent on additional work for leveling walls. In addition, the panels allow you to hide defects and unevenness of the walls.
2. Light plastic panels can be installed by one person, this is also a big plus, because in a bathroom or, especially, a toilet, there is not much space for several craftsmen to turn around.
3. PVC panels are an exclusively environmentally friendly finishing material. Throughout its service life, plastic remains safe for people and animals under any temperature conditions. A toilet finished with such wall panels does not rot, mold or mildew does not form on it even at the highest humidity, which makes plastic material ideal for use in the bathroom area.
4. Finishing with such slabs guarantees easy cleaning. Any housewife will confirm that this is a big plus when you don’t have to think about how best to carry out wet cleaning in a particular room.
5. Ease of installation allows installation even by a novice master.
6. Excellent appearance of the material. Any pictures can be depicted on the panels. It all looks beautiful and impressive.
7. Long service life. With proper care, plastic panels can last for many decades.
8. Sheathing PVC walls panels are quite cheap due to the availability of prices for the material itself.

All these advantages of plastic panels allow them to become an increasingly popular and popular material for use in the interior of a toilet or bathroom. And yet, as practice shows, there cannot be only advantages. PVC wall panels have a disadvantage - they can be quite fragile and break if you lean on them or throw something heavy or sharp at the wall.

Using panels in the toilet: photos and methods of decoration

Design solutions of specialists may imply the use of plastic panels for complete different surfaces and planes. The plastic panels themselves, depending on the thickness and maximum load, can be installed on different surfaces.

Namely:

1. On the walls. Classic use of plastic panels. Here, the choice of the type and quality of material depends only on the wishes of the person himself, the designer’s ideas or the amount of available funds.
2. On the ceiling. Often used for visual magnification space. For example, with the help of panels you can turn the ceiling into a sunny clear sky, or a starry night sky. A ceiling covered in this way in a large toilet can force a person’s brain to perceive the bathroom space on a larger scale.
3. On the floor. The floor version of the panels is not used so often, but is also quite popular. With the help of panels, you can turn an ordinary boring toilet floor into the bottom of the ocean or simply outer space, that is, whatever your heart desires.

In addition, it is worth mentioning that at this stage in the market of construction and finishing materials there is a wide selection of panel colors for any purpose. You can find red, black, white panels, colorful or with patterns.

Panels using photo printing are very popular.

For example, this method can allow you to recreate in the bathroom or toilet room the atmosphere of being on a paradise island or in outer space or the ocean, where a complete feeling will be created that the owner is among exotic fish, especially if the walls, floor, and ceiling are made in the same style.

Repairing a toilet with plastic panels: photos and examples

When a choice has been made regarding the installation location of the panels, their type, color and all the nuances have been clarified, a person is faced with the question “how to install plastic panels?” The following options exist - contact a specialist finishing works, pay him a certain amount and enjoy the work done, or do everything yourself. The latter option is more economical, and if you do the repairs yourself, it will be much more pleasant.

If you decide to carry out extensive installation yourself, then you should first decide on the type and features of installation work with plastic tiles. If using self-adhesive PVC tiles, then the work will not take much time. Will need to be removed protective layer and glue the finishing material to the surface. It is worth understanding that in this case it is better to stick on flat surface. Installation with glue - the back surface of the tile is treated with a thin layer of glue. Next it is glued to the surface of the wall of the bathroom or toilet. Installation work using lathing - in this case a perfectly smooth surface is not required. A plastic or metal sheathing system is attached to the wall, to which plastic panels are subsequently glued. Tiles and panels are attached using adhesive solutions.

Finishing a toilet with plastic panels: design (video)

Some people prefer to do renovations in the entire house or apartment at the same time, while others prefer a leisurely, gradual renovation, when you work closely first on one room in your home, then on another, and gradually the whole house is renovated, but doing everything according to your ideas, it turns out very beautiful.

Any room in which people spend some time should look neat and clean. At the same time, not only living rooms, but also a bathroom and toilet can be comfortable. If the renovation of a bathroom does not raise any questions, and they always try to do everything neatly and beautifully, then the toilet is often left for last. You can make your bathroom comfortable and pleasant with the help of in various ways: some of them are labor-intensive and expensive, and some, such as the use of plastic panels, allow you to quickly, inexpensively and without any problems achieve the desired result.

Features and Benefits

PVC panels are a modern material that is convenient to use for various rooms, but it has proven itself especially well in the bathroom and toilet. They can be used not only for walls; there are special varieties for the ceiling, and even for the floor.

With a limited budget, the use of such material will allow you to get a well-finished room at minimal cost.

PVC panels have the following varieties:

• wall version with a decorative frieze as decoration;
• leaf variety;
• with imitation wood;
• photo panels;
• with a pattern that is applied using a laser;
• with thermal printing.

Finishing a toilet with such plastic panels can help create in a given room a certain flavor, atmosphere, pleasant environment in which any visitor will feel at home.

If there is no clear certainty that PVC panels are exactly what you need for good and inexpensive repairs, then listing all the advantages of the material should leave no doubt.

Let's list positive features of this facing material.

• Convenience and ease of installation, which can be easily handled even by a beginner who has no experience in this matter.
• Significant budget savings for all repairs. Compared to the same tile, the finishing will be several times cheaper.
• It is possible to put the bathroom in order without additional measures to level the walls and so on, which will save effort, time and money.
• The panels have good waterproofing, so you shouldn’t be afraid of moisture getting on them. To completely protect yourself from problems with dampness on the walls, you only need to use waterproofing.
• Caring for walls that are finished with this material is very simple - a simple washcloth will suffice.
• Long service life, so the repairs made will last quite a long time.

Panels are not afraid of funds household chemicals, therefore they can be washed well from time to time to maintain complete cleanliness of the bathroom.

Positive traits speak for themselves, but do not forget about a number of shortcomings that you need to familiarize yourself with before the repair process begins.

So, the disadvantages include:

• flammability of plastic panels, which release harmful compounds during combustion;
• to carry out repair work, it is important to choose the right model of facing material and be able to apply it correctly in relation to a specific room;
• the size of the room after renovation becomes several centimeters smaller, which must be taken into account if there is a need to hang shelves or install equipment.

The use of PVC panels in the renovation of bathrooms and toilets is very convenient, since the result is very good with little expenditure on materials, and the process itself can be carried out independently, without calling specialists, which will also affect the final cost.

Material selection

In order for a bathroom renovation to be successful, it is important to choose the right materials for it. Whatever panels are needed: for the ceiling, for the walls or for the floor, it is important to know the basic selection criteria that will help you find exactly what you need. The variety of such materials is very large, manufacturers are actively replenishing the lineup, releasing options with prints, drawings, photographs and pictures that will appeal to any consumer.

Any products must have the appropriate level of quality, be it high-quality expensive samples or economy-class materials.

When choosing PVC panels, you should pay attention to several nuances.

• The composition must contain additives that improve the elasticity of products. Low-quality options lose their shape when pressed and can become deformed, or even break completely. If you press the panel on both sides with your fingers, the material should not bend or sag.
• When the panel lock is bent, in high-quality products this part will return to its place without any changes, but in low-quality products it will bend or break off.

• The surface layer of high-quality panels must be perfectly smooth; stiffening ribs and any other irregularities should not be visible through it. If they are, it means the material is of low quality.
• Taking in PVC hands panel, you should pay attention to the smell that comes from it. If there are clear signs of chemical and unpleasant compounds, then the product is considered cheap. The presence of such an odor may indicate that unsuitable raw materials were used in the production of materials, which may pose a threat to human health.

• Manufacturers have taken care of a variety of product options, including width. If you have to finish a small toilet, then it is not advisable to use the widest panels, since a lot of scraps remain from them, but if the dimensions exactly fit one of the sizes of the finishing material, then you can safely purchase it.
• If repairs are planned conscientiously, then when purchasing products you should ask for quality certificates for all options of interest in order to ensure the integrity of the manufacturer and protect yourself from the risk of poisoning or unplanned repairs in the near future.

Wall panels for the toilet can be of any color, width, have a pattern or be a single color, this only changes the design of the room.

The most important thing is to find high-quality materials with the required dimensions in order to quickly carry out repairs and use the updated bathroom with pleasure.

Decor options

Having decided on the material with which the toilet will be finished, it is important to find not only high-quality panels, but also those that will correspond to the design of the entire room. The bathroom should be a logical continuation of the general idea, not stand out or contrast with it. In order for any repair work In living rooms, the toilet has always been cozy and beautiful; it is important to choose neutral design solutions.

First of all, you should decide whether the panels will have a pattern or their color will be plain. Each owner decides for himself this question taking into account personal preferences, the size of the bathroom and the general concept of renovation. The next step will be to select the color scheme of the finishing coating, which is also selected taking into account various factors. For those who do not set themselves the task of creating something particularly beautiful and intricate in the toilet, it is best to choose plain light panels that will always look good, decorating the room. More often White color They are used for those rooms that have small dimensions, or they contain interesting plumbing fixtures or household appliances that you want to emphasize without distracting attention from the main goal.

If the bathroom is combined, or simply has large dimensions, then instead of light colors you can use dark or contrasting shades, which will not visually reduce the space, but will give it more interesting view. If you want to add something interesting to the design of the room, then the presence of a pattern on the panels will become that very highlight. Most often, abstractions or geometric shapes are used in toilets, and unobtrusive flowers also look good.

It is best to decorate a combined bathroom with panels depicting the sea, beach, shells and any other marine theme.

If you want to make the room elegant and stylish, then it is best to use a material that imitates wood, marble or other stone. It is important that the drawing is applied clearly and efficiently, otherwise the entire effect will be lost. PVC panels can be used both around the entire perimeter of the room and in some areas, combined with tiles, a painted wall or wallpaper. If you need to close communications in the toilet, then plumbing roller shutters are perfect for this, they look aesthetically pleasing and provide easy access to all pipes.

As for the color of the panels, in addition to white, beige and yellowish shades, you can also successfully use darker options: blue, light blue, light green, green, red, purple. To prevent the room from seeming oversaturated with colors, it is best to dilute the saturated shades with lighter and calmer ones. This technique will help make the design of the toilet interesting and attractive, and it will always fit into the overall concept of the entire apartment.

Current trends in design

Plastic panels are cheaper than all materials for finishing bathrooms and toilets, which is why many people consider them not suitable option to create a beautiful, strong and cozy room. If you choose the right PVC coating, you can achieve results not only no worse, but in many ways even better than when using tiles or other finishing methods. The advantage of this material is the ability to try and experiment in search of the ideal color scheme or design idea, because installing and dismantling the coating is very simple, unlike other options.

To make the interior beautiful and interesting, you can alternate colors in the toilet or even use a whole range of colors, the so-called ombre technique, where one shade goes from the lightest to the darkest, from stripe to stripe, which looks very impressive. If you can’t make the bathroom cozy, panels with a wood texture will do the job best.

If you need to give the room lightness and spaciousness, then the texture of marble or other stone copes best with this.

Modern tendencies require new and fresh solutions, one of which is a combination of two different options panels at the bottom of the room and throughout the rest of it. Most often, such zoning is carried out at a level of one meter from the floor level, highlighted with a different color, which is usually darker than the main one. The combination of not only colors, but also patterns looks fresh and original. It could be small peas and large flowers, abstraction and plain panels, bright patterns on one wall and plain materials on others.

For a small toilet it would be appropriate to use white panels with lettuce leaves or delicate small flowers, which visually expands the space, making it light and picturesque. To create a unique design, you can select one wall for PVC materials, and paint the others white. It is important that the panels have bright, accent color and alternated every other with whites. This technique will help expand the room while using a splash of color. Any design choice should be selected taking into account current trends, the wishes of the owners and the size of the toilet.

Combining all the indicators will give the desired result.

Planning orientation

Everyone's bathroom layout is different, panel house it will differ from brick in size, height and even thickness of the walls. There are apartments in which it is not possible to create two separate rooms; this requires the construction of a combined bathroom. Renovating a large or small room in an apartment is always a labor-intensive and costly task, but if you choose the right materials, the procedure can be sped up and made as inexpensive as possible.

The use of PVC panels in the toilet is convenient for many reasons, which is why the demand for them is constantly growing. In order to update the interior of a room, you need to find high-quality materials and install them correctly. The correctness of the installation process is to choose the most logical option, based on the layout. If the room has low ceilings, it is better to mount the strips vertically, which visually makes the toilet taller; if the room is very small, then it is worth installing the parts horizontally to make the walls longer.

In addition to changing the amount of materials for the walls, it is worth calculating the costs of the frame, which will be built differently for each case. When laying panels vertically, the frame is mounted horizontally and vice versa. An important step will be the installation of the sheathing, which must be clearly leveled. The evenness of the walls, the correctness of the corners and joints will depend on this process. The layout of each toilet is unique in its own way, so it is important to focus on the measurements of the room and carry out everything clearly according to them, and not according to other people’s recommendations.

The technical compartment in the room can also be in various places, go beyond the walls or be organically included in them, which, in turn, requires the construction of a frame or a special door or roller shutter for easy access. In addition, the key to ease of use of a renovated toilet is that it has niches and shelves where all the things necessary for this room will be located. This must be provided for at the stage of assembling the frame, so that you can immediately mount a shelf, a ledge where there will be a cabinet or another option for storing hygiene items.

Almost every toilet is now equipped with a water meter, which should also not be forgotten, because it will either need to be left in plain sight or neatly hidden with easy access. If this item remains on display, then the corresponding holes are cut out in the panels that fit the diameter of the water pipes; if you can make a box, then it is most convenient to equip it with a special door that easily opens and closes.

All elements can now be easily found in construction stores; the main thing is to know how and what to use.

Combined bathrooms often contain, in addition to a toilet and a bathtub, a washbasin, household appliances, there may be a ventilation window and the ventilation itself. When calculating the amount of materials, it is important to choose the right width of the panels, which largely determines the ease of installation and the presence of waste. You can select products of different widths for each wall if there are significant differences and features. The main thing is to purchase panels of the same color or pattern, or think of some original idea, which will be dictated by the need to adhere to the layout, but will help in creating a unique appearance bathroom.

Do-It-Yourself Sheathing: A Step-by-Step Guide

To cover a toilet with your own hands using PVC panels, you need to correctly build the workflow, not forgetting about everything important points. The first step is to correctly measure the room, accurately recording all measurements. This will help you buy the required amount of materials, having previously calculated their width. Proper preparation for repairs is the key to its successful completion, therefore it is worth taking care of the availability of all the tools that will be needed during the work.

Planning a trip to hardware store When considering materials, it is worth remembering about the fittings, without which it is unlikely that you will be able to make a high-quality and beautiful repair.

The finishing fittings profile is needed:

• for use in external and internal corners;
• to mask the joint between the panel and the floor or ceiling;
• for neat installation of cabinets, doors, windows that were thought out in advance.

There are quite a lot of such finishing elements, these are connecting, ceiling, end moldings, for internal corner, for the outer corner and starting, as well as many other necessary parts. Therefore, you need to accurately determine the repair plan in order to choose the right option. As for the panels themselves, they are taken with a margin of at least 15%, taking into account trimming or unforeseen circumstances. Next comes the purchase of material for the sheathing: this can be metallic profile or wooden beam. It is important to choose the thinnest options, for example, a section of 20 by 50 mm, in order to minimize the volume of the room.

If any additional structures are planned, you need to purchase a profile taking these buildings into account.

The lathing is fixed to the wall with dowels, which must securely hold the entire structure, which means it must fit into the wall at least 5-6 cm. wooden beam You can use a construction stapler with special staples. If the room has been decorated previously and the walls are smooth, you can install the panels directly on them without a frame, planting the material with glue or liquid nails, which is important to purchase in the right quantity.

When constructing a wooden sheathing in a bathroom, especially a common one, you should take care to apply the composition to it, which will protect the tree from moisture, microorganisms and decay processes. In addition to this product, it is important to purchase a primer for treating the walls on which the PVC panel will be installed.

Any repair is not complete without tools that should always be at hand.

If we are talking about installing plastic panels, then you need to prepare:

• screwdriver and bits for it;
• a hammer drill or a drill that can perform the same functions;
• drills that can be used to work both on concrete and wood;
• jigsaw, electric or manual;

• in the case of using a metal profile, you need metal scissors;
• regular hammer;
• stationery knife;

• tape measure, level and corner;
• pencil or marker for marking;
• roller or brush.

As additional tools You may need: spatulas, a hair dryer if you need to work on walls.

Before finishing the walls with new material, you need to remove wallpaper, if any, and paint that has peeled off.

If the sheathing is made of wood, then after cutting it you need to treat each part with a special agent and leave it until completely dry. While the boards are drying, you can start preparing the walls and ceiling, namely priming. It is best to apply two layers at once of this composition for better results.

Each of them will take no more than two hours to dry, which will be enough before the sheathing can be installed.