Which doors to choose for a country house. How to choose the best entrance door to a private house

The right entrance door is not only a reliable barrier against unwanted visitors, but also an aesthetically perfect detail that fits into both the exterior and interior of the house. And it should not release heat or let sound through. We'll tell you what to look for when choosing a door.

Choosing the dimensions of the entrance door

The standard height of the entrance door leaf is 200 cm. Therefore, external doors with smaller or larger dimensions will be sold to you only for an additional fee. Products beyond the standard are made individually, and such products always cost more.

With the width of the door, everything is not so clear. Manufacturers offer a wide range of standard sizes - from 80 to 120 or more centimeters. Moreover, meter-long street doors are mostly made with single leaves. Well, if the width of the entrance opening in a private house exceeds 100 cm, then, most likely, a double-leaf door will be installed there.

The option with two doors allows you to bring in and take out assembled furniture and other large-format items from the house, but weakens strength characteristics enclosing structure. In turn, an opening of 60-80 cm violates throughput entrance structure.

As a result, in a private house it is better to install doors 200 cm high and 90-100 cm wide. These dimensions will suit most homeowners.

Which door keeps frost and noise out?

Maximum level of protection against low temperatures gives a polymer door. This enclosing structure is assembled on the basis of a polyvinyl chloride fabric, supplemented with double-glazed windows and reinforced steel parts. In fact, this design is no different from the already familiar plastic window. Therefore, for the owner of such a door it is absolutely unimportant what temperature the thermometer shows on the street: the 5-chamber door does not freeze even at -30 °C.

Wooden panels cope with frost and noise a little worse. Therefore, to protect against extreme cold, two sheets are used, between which there is an unheated vestibule. Moreover, you can use the veranda as a vestibule, closed porch or an entire extension. If you place only one wooden door at the entrance to the house, then heat losses will be inevitable. For complete protection from 20-25 degrees of frost, the thickness of the canvas should be at least 10-15 cm.

All-steel doors provide no protection from cold or noise. But if a layer of good heat insulator is integrated into the metal shell, and thermal breaks are provided in the frame structure, separating the outer layer from the inner, then the situation changes to the opposite. Such doors will withstand 30-degree frosts.

True, manufacturers decided to supply the market steel structures with thermal breaks in the leaf only after the noisy failure of the previous generation of metal doors. Therefore, this option does not yet enjoy much confidence among ordinary people. And the owners of metal enclosing structures complement the main doors with additional ones, with PVC or wood panels.

Which door is hard to break into?

Based on this criterion, it is very difficult to choose which door is better and which is worse, since attackers can break into any enclosing structure. But good doors You can still choose one with a high level of protection against hacking. To do this you need to follow the following selection criteria:

• the door must correspond to at least the second class of burglary resistance, and ideally – the third. The resistance class is indicated in the specification.
• door hinges should be located not from the street (on the outer surface), but from the side of the house or in special grooves in the frame.
• inside the door leaf there should be a reinforcing frame, designed in the form of a lattice with narrow cells.
• At the end of the canvas there should be anti-removal bolts - pins that fit into specially equipped grooves in the box.
• all gaps between the door frame and the opening must be covered with thick metal trim.

A door selected according to these criteria is very difficult to break. Even with the second class of hacking resistance, attackers will have to tinker for 10-15 minutes. And the third class can resist for 30-40 minutes. Moreover, statistics claim that after 10-20 minutes of unsuccessful attempts to open the door, thieves abandon their idea, fearing the appearance of unwanted witnesses.

The internal arrangement of the hinges guarantees protection from inexperienced thieves who open the enclosing structures by cutting off the rotating mechanisms with a saw or grinder. Therefore, such doors are useful both for a private home and for a summer house designed for seasonal living.

The reinforcing frame, platbands and anti-removal bolts prevent burglary based on the physical strength of the attacker. It is much easier to break through a thin door leaf than a grill made of hardened rods, and anti-removal bolts will hold the door even after thieves cut off the hinges.

However, the maximum guarantee of entry protection private house Only reliable locks can provide. Because all these crossbars, platbands and grilles are more likely protection from hooligans than from experienced burglars.

Door locks: which model is better

Reliable locks provide about 70 percent resistance to burglary. Moreover, the maximum result is ensured by locking devices different types. Therefore, before purchasing a lock, a prudent owner should become familiar with each type of lock. Which is what we will do below in the text.

Now the mass consumer is offered four options for mechanisms:

• lever lock with a “safe” T-shaped key,
• a lock with a cylinder cylinder and a key plate with characteristic grinding on the edges,
• cross-shaped lock with bar key, working part which is designed as a cross-section,
• a disk lock, the key of which has the shape of a semicircle with cut grooves.

The first pair provides maximum resistance to burglary: lever and cylindrical locks. The lever plates and spring-loaded pins of the cylindrical version require the highest level of skill from burglars. But it is very difficult to take these constipations by force. The bolts of modern locks rotate around an axis, making cutting difficult.

As a result, even an experienced attacker must know the design and methods of working with mechanisms of the first and second types, and universal specialists are very rare in any business. That is why it is necessary to install different locks on the door, and not two lever or cylindrical locks. Although, in terms of burglary resistance, the lever version provides maximum protection.

In addition, a good alternative to the cylindrical version is a disc lock. He gives good protection from master keys. Therefore, the lever + disc lock pair is capable of detaining a burglar with highly qualified. But cross locks There is no need to use it in a private home. Even an inexperienced burglar can open such a lock.

The front door to the house requires a thoughtful attitude. It is necessary to take into account many nuances when choosing and installing it. Let's look at this in more detail.

Is it possible to imagine a house without doors? Definitely not. Doors are one of the most important structural elements of a country house; in fact, they are its face. And a lot depends on how it, that is, this person, will be, including the first impression of the owners of this house, and the safety and comfort of living in it.

Taking into account all of the above, we can safely say - external door a country house should be of high quality, reliable and attractive in appearance.

If earlier entrance doors For country houses were made mainly from wood, production technologies have now expanded significantly. They are made from different materials. Some of the most common options are metal doors, including with overlays made of solid wood.

The most economical and practical solution not only for a country house, but also for garden house or dachas - this is the installation of a metal door with wooden overlays. The material here is usually pine or oak. The first option is cheaper than the second, but not as durable. A door with ash linings also works well outdoors; this material has characteristics comparable to oak.

The main protection for such doors is varnish coating, but it will not be able to protect it from impacts and chips. If the paintwork is damaged, the door may begin to rot after some time. To avoid such unpleasant moments, decorative linings made of stainless plates are used for additional protection. They also protect the tree from aggressive external environment. In the absence of stainless steel plates, the front door facing the street may begin to rot due to constantly melting and freezing snow.

If we talk about the advantages, then the main advantage is the aesthetic appearance. This door immediately attracts attention. The second plus is great possibilities for decoration. Since the linings are mostly made by hand, if you wish, you can ask the craftsman to decorate the door, for example, with either carvings or a pattern. And you can choose any shade for the door, including the tone of the double-glazed windows.

Another important advantage is that they do an excellent job of maintaining heat in the home. By the way, it is better not to use MDF panels for the front door - they immediately fade in the sun, and temperature changes cause the panel to bend over time. But the tree is not afraid of anything ultraviolet radiation, nor temperature changes.

As for the disadvantages of such doors, they are quite expensive. There is also a possibility that low-quality material may have been used in production. There may also be small cracks on it, which are practically impossible to get rid of. Although some customers even like the presence of cracks.

Here are some tips for those who have decided to install a metal entrance door with solid wood overlays in their home.

First. The house must have a porch, that is, the door should not stand without any canopy, and neither rain nor snow should fall on it. In addition, the presence of a porch will extend the life of the entire structure, since water will not be able to flow under the trim and will not get on the frame.

Second. In houses made of timber or logs (without external straight cladding), when installing doors, you need to take into account the fact that such houses shrink, and each side of the opening can settle slightly in different directions.

Often the frame is attached directly to the beams. As a result, when the house shrinks, the doors begin to close poorly. In order to avoid this, in wooden houses it is always necessary to install a shrinkage board, fifty, that is, when installing doors, it is necessary to make an additional frame in the opening.

By the way, here we must not forget that in this case the standard platband will not be enough to close the fifty. Therefore, so that part of the shrink board and ends are not visible, it is better to immediately order a wide platband of 10-12 cm.

One more point: if the floor level at the entrance to the door is below the door level, then in order to close these installation joints, it is better to make platbands on four sides.

When purchasing metal doors for a country house, the first thing you need to pay attention to is the paintwork. It must be of high quality. To protect the coating, it is better to install overlays. In addition, it is desirable to have a porch.

The second point is condensation. There is no escape from this phenomenon, no matter how thick the door is, since there is a temperature difference between the street and the warm room. In this regard, when decorating the interior of a door, you cannot use a laminated panel, since the accumulated condensate will be absorbed into the panel, and in a year or two it will rot, begin to swell, and bend.

One of the options interior decoration The entrance metal door is metal. True, here you need to be prepared for the fact that frost will form on the door during operation. To avoid such an unpleasant moment, either another internal door is installed, or at the design stage an additional room such as a vestibule is provided in front of the entrance to the house. This is done so that the temperature difference is smaller.

In addition to metal, you can also use metal for interior decoration of entrance doors. MDF panel with an outer coating of PVC film. In this case, the falling moisture is not absorbed, does not freeze and remains in the form of a small evaporation.

As for the advantages of metal doors, they are long service life and durability. By the way, the thickness of the steel should be more than 1.5 mm, but experts do not recommend taking steel more than 2 mm. This does nothing except make the door more expensive and heavier.

When ordering doors, you should not lose sight of such a thing as the lock. It’s also better not to skimp on them.

Moreover, it is better to install two locks: a cylinder one - for convenience, and a main lever type - for protection.

What are the most common mistakes when choosing entrance doors for your country house? Usually people, wanting to save money, look at the price, forgetting that good quality door can't be cheap. Therefore, the main advice is not to save money and install good doors in your home! published

How to choose entrance doors to an apartment? Each of us has our own idea of ​​​​products. But everyone considers reliability, quality and design to be the main qualities. You can secure your apartment from intruders with additional actions: carry out security, arm the apartment and install it. These are additional costs that can be avoided. However, there are nuances that affect reliability. It is heat and burglary resistant. To select the best product, we conducted a market analysis and compiled a rating of entrance doors to the apartment and consumer reviews to help make the right decision.

The first thing you should pay attention to is the material used to make the doors. Wood or metal is most often used in production. Let's look at the features of each. High-quality wooden entrance doors to an apartment are expensive. They are quite reliable, and it is precisely such products that create prestige for their owners. Not every wood is suitable for making a high-quality structure. Better to use:

• ash;
• mahogany and ebony.

Products made from other types of wood are significantly inferior in strength and performance characteristics. In this case, it is better to purchase doors made of metal. The price category is different. We will tell you further how not to get confused and know what to look for when choosing.

Main technical parameters of entrance doors

The front door must meet two criteria - reliability and security. Therefore, when choosing, it is important to consider the thickness of the base and outer sheet. It is important that the structure has stiffening ribs. It would seem that the higher these parameters, the better. Excess weight will lead to wear on the hinges due to rapid inertia when opening.

Let's consider the main characteristics of metal entrance doors to an apartment in more detail.

Sheet thickness

Not every metal is suitable for entrance doors. Medium-carbon and medium-alloy alloys are considered optimal. You can check the sheet thickness in the technical data sheet, but you should know the basic classification:

The optimal weight of the product should be within 70 kg. Structures weighing about 100 kg are installed in cans.

Canvas design

The canvas consists of a frame rectangular shape with two steel sheets. Manufacturers sometimes replace the inner panel with MDF or veneer. If, you should choose an all-metal structure, since temperature changes and humidity will quickly render the wooden panel unusable.

It is mandatory to install steel casing and vestibules that will hide all areas and protect the premises from unauthorized entry.

Stiffening ribs are installed between the sheets. The minimum set is 2 vertical and 1 horizontal. As their number increases, the reliability and weight of the structure increases.

Castles

When selecting a product, it must meet the following criteria:

• The quality of the lock must match the door. A model assembled from cheap materials will not protect even the most expensive structure from hacking. And, conversely, it is useless to install a premium lock on Chinese products;
• needed for front door mortise lock, overhead models will not work. A latch is required;
• Manufacturers install 2 locks. This is necessary to protect against burglary, because opening two locks for a burglar is much more difficult and takes longer. There is another reason - reinsurance. If one breaks down, you can use the second lock during repairs;
• Locks need to be selected with different designs. It is recommended to install a lever and cylinder lock.

You should choose a lock only from reliable manufacturers. They guarantee high quality and reliability of the models.

Hinges and trims

For urban conditions or private houses, installing 2-3 loops is enough. They must be supplemented with ball bearings. This increases their service life. Elements can be hidden or external, which are attached to the stand and canvas by welding. External loops spoil the appearance of the product, and they can be easily cut off. Hidden ones are much more reliable. However, they have their drawbacks:

1. the price of the door increases;
2. the hinges are hidden in special grooves, this reduces the opening of the structure;
3. smaller opening angle.

The hinges are closed with a platband, which makes it difficult to break into the door.

Design

The main thing when choosing is the design of the canvas. The finish must be practical, resistant to mechanical damage and weather conditions. This is especially important for private houses and cottages. Vandal-proof powder coating meets these requirements.

The inner fabric should fit harmoniously into. Manufacturers offer designs with removable internal panels, which can be changed if necessary.

How to choose the right entrance door to your apartment

Many manufacturers are engaged in the manufacture of structures. How not to get confused and choose the best steel entrance doors for an apartment in the price-quality ratio? We have compiled several rules that will make it easy to navigate this market segment:

1. The base should be made of high-strength steel, sheet thickness 2-3 mm. In addition to reliability and durability, it has additional noise and heat insulation.
2. Finishing can be made of MDF, powder coating, wood.
3. When choosing, you should know in which direction the door will open and the location of the handle.
4. Moisture and moisture criteria.
5. You should pay attention to what materials the heat and sound insulation is made of.
6. Addition of locks to the design, degree of burglary resistance.
7. Door fittings: hinges, chains must be good quality, otherwise they will quickly fail.
8. When choosing a product, it is important to choose a model from well-known manufacturers. They will provide a long warranty period not only for the canvas, but also for the accessories.
9. Installation should only be entrusted to professionals.

Additional functions of entrance doors

A high-quality door must not only meet the requirements of reliability and safety, but also fulfill additional features. For city apartments, it is important that outside sounds and smells from the entrance do not penetrate into the room. Therefore, you should pay attention to these parameters.

Metal entrance doors to an apartment with sound insulation

Sound and heat insulation of the entrance door is made with mineral wool, polyurethane foam or polystyrene foam. In addition, they will protect the room from external sounds. According to professionals, the best design is one filled with polyurethane foam. In addition, to ensure sound insulation, it is necessary to maintain a tight seal between the canvas and the frame. To do this, you need to install 2 rubber sealing contours around the perimeter of the frame. You can, if necessary, check with the seller about how to add an additional metal entrance door to the apartment.

Another important parameter– door thickness. It must be at least 60 ml, then the product will meet all the required characteristics.

Entrance metal doors to an apartment with a mirror

Entrance door designers have developed completely new model with a mirror cloth. Besides the fact that it is convenient to have a mirror in full height, while it does not take up space and visually increases the space. Such products can be divided into several types:

• with mirror panel, which is attached using a special adhesive composition;
• with built-in mirror– the mirror surface partially covers the panel.

You should know this! The only drawback of the designs is the inability to install a peephole. If necessary, a video peephole can serve as an alternative.

Rating of steel entrance doors to apartments and customer reviews

You cannot skimp on the safety of your home. The entrance door must fully meet all requirements modern life. To better navigate the models, we have compiled a rating the best manufacturers 2017-2018 in different price segments.

Manufacturer: Forpost

The products first entered the market more than 17 years ago. In addition to manufacturing steel entrance doors to apartments, they produce locks. The products are in great demand due to their high quality and reasonable price.

The manufacturer offers 3 types of designs:

• standard− designed for installation in apartment buildings;
• reinforced− recommended for private houses;
• construction– for installation during the construction of houses or.

All models have hidden hinges, which increases their safety.

Advice! If you need to remove elements, you should contact the manufacturer directly or a service center.

As proof of the above, here is a consumer review of Forpost products.

xumuk032 Russia, Bryansk, door “Forpost” 228: Advantages: durable coating, good insulation, looks decent.

Disadvantages: the keys to different locks are almost the same in shape and color.

This is a steel door with a thickness of metal on outside 1.5 mm. The inside is also metal, but a little thinner. Filling: polyurethane foam. And also a bunch of locks.

The outer side is made of steel 1.5 mm thick with weather-resistant coating. That is, this one is suitable for installation directly on the street. Interior canvases and boxes with polymer coating. Which is also very successful, because... when installed between the street and a heated room, there will be condensation, and polymer coating is not harmful, unlike MDF...

More details on Otzovik: http://otzovik.com/review_2983317.html.

Manufacturer: Torex

The company produces metal structures more than 25 years. The product range can be divided into 3 categories:

• for private houses. Expanded polystyrene is used as insulation. You can also choose doors with a thermal break, this will help save heat;
• for apartments in high-rise buildings;
• fire protection They are able to hold open fire until 6 o'clock. In addition, they are equipped with an “Anti-panic” mechanism, with which the doors can be opened from the inside.

Here is one of the many reviews about the models:

Hela, Russia, metal entrance door “Torex”: Advantages: no noise or smell.

Disadvantages: none.

We bought the entrance door to the apartment with sound insulation from Torex. These products are not very cheap, but quite high quality. The door cost us 24,000 rubles. It has 2 locks, 1 latch. There is a peephole. True, we ordered a metal curtain for it. I like the door hardware. Everything works quite reliably, and it looks normal...

More details on Otzovik: http://otzovik.com/review_1405347.html.

Manufacturer: Elbor

The history of the Elbor manufacturer begins in the 70s of the last century. The following series of doors are currently produced:

• luxury;
• premium;
• standard products;
• Optium with a minimum set of functions;
• economy class.

High quality sets the product apart from the market of similar products.

Manufacturer: Guardian

The manufacturer first began production in 1994. The products are highly expensive, which is not surprising. It has received the highest awards for quality and durability. Products have a certificate fire safety. Currently, the market offers products of different designs in a wide price range, but if funds allow, you should choose the premium class. On the manufacturer's website you can see photos of entrance doors in different price ranges.

Manufacturer "Condor"

This manufacturer produces doors in a good price-quality ratio. Mineral wool is used for thermal insulation. The design is resistant to external influences, the canvas is painted with a special varnish composition. Doors can be installed. No obvious shortcomings were identified, and therefore it is worth paying attention to the product when choosing.

Manufacturer "Stal"

Metal doors from the manufacturer "Stal" are similar to those produced by the Elbor plant. The only difference is the model range. The manufacturer does not produce premium models; the main production is designed for the average consumer. The products are made from sheets with a sheet thickness of 2 mm; a profile of complex design is used, which increases the strength of the doors.

It is rather stupid to explain the functionality of the front door - this is a thing that no private house or apartment can do without; perhaps the most important attribute of personal home safety. Of course, the degree of reliability of such doors greatly depends on the price segment. The cheapest models can only boast of a pleasant appearance - the protection functions here will be performed purely nominally.

In the case of more expensive doors, developers bother with both the design and reliability parameters, supplementing the design with stiffening ribs, and also using sheets of two millimeters and higher as a base.

The market segment of entrance doors is very extensive and includes huge amount manufacturing companies. We decided to focus only on the most best companies, time-tested. We present to your attention the top 10 best manufacturers of entrance doors in two main categories. The final list was formed based on the following criteria:

1. customer reviews about use experience;
2. opinion of professionals;
3. extensive range of models;
4. degree of fame of the company.

The best manufacturers of entrance doors in the budget price segment

5 Outpost

Best price for products
Country: Russia (manufactured in China)
Rating (2019): 4.6

A company that was very popular until 2009. It began its thorny path not so long ago - production was launched in 1998. For 11 years, Forpost fought hard for profit, but in the already mentioned 2009, the management realized that the only way to reduce the cost of the door manufacturing process was to move production to China. From that moment on, things went uphill - products began to be “stamped” at 500 thousand copies a year.

In general, users are satisfied with the Chinese origin of the doors, but cases of break-ins or unexpected breakdowns overtake some at the most inopportune moments. This can be explained very simply - since the company moved to China, counterfeit copies under the “Forpost” trademark began to appear on the market.

Advantages:

• low cost even for luxury doors;
• good concentration service centers throughout the country, appropriate service;
• A good choice is a wide range of entrance doors.

Flaws:

• the fittings are suitable and supplied only from the factory;
• Sound insulation fails in some models;
• the presence of low-quality fakes on the market.

4 Groff

Premium quality at an average price
Country: Russia
Rating (2019): 4.8

Groff is one of the official trademarks of the Bravo manufacturer, specializing in the sale of metal entrance doors. Strikingly different from classic products management company the use of exceptionally thick steel, a reinforced structure with additional stiffening ribs, fire-resistant mineral wool produced by Knauf, as well as complete fittings (handles, locks, hinges, awnings, etc.).

The aesthetics of Groff doors matches the high nominal quality, and is based on early stages design thanks to the work of in-house designers. Ultimately, consumers receive ready-made solutions for installation in apartments and private houses, the guarantee of long service life of which is confirmed by a ten-year period of mandatory maintenance from the manufacturers themselves. Of course, one of the most worthy candidates for a place in the ranking, both according to user reviews and expert opinions.

3 Bravo

Availability of products for various market segments
Country: Russia
Rating (2019): 4.8

An indispensable leader in the domestic segment of entrance doors in recent times, the model range of which includes over 350 units of the original product. This catalog specifically presents doors created according to modern technology 3D-Graf finishes, the cost of which is significantly higher than the market average.

However, there is an alternative option, the cheapness of which is due to the use of veneer. In terms of execution, the entrance doors of the manufacturer Bravo are not distinguished by abundance, but this is fully compensated by reliability and quality. The products of this company are successfully sold under other brands, such as Bravo Lux and BelDver, bringing the owner a good profit. Regarding user reviews, we can conclude the following: a number of models in the company’s budget segment have mediocre sound insulation, but all of them, without exception, provide reliable protection from drafts, which is determined by the use of good seals and insulating material with pronounced thermal functions.

2 Neman

The best combination of price and quality
Country: Russia
Rating (2019): 4.8

A company that knows a lot about true security. Features a wide model range and a very good price for their products. They care not only (and not so much) about safety, but about the appearance of the doors - their product clearly does not lack entertainment value.

In terms of reliability characteristics, everything is good - the doors are made of thick sheets of alloy steel and, without exception, are equipped with a double lock. But the number of locking elements can be increased at the request of the user. It is also striking that the buyer can choose accessories from other manufacturers - Neman’s sense of pride is far from off the charts (unlike some competitors).

Advantages:

• availability of quality certificates for all main safety parameters;
• reasonable cost of product lines;
• abundance design solutions.

Flaws:

• not found.

1 Became

The choice of users and professionals
Country: Russia
Rating (2019): 4.9

From a purely technical point of view, the Stal company is similar to the premium manufacturer Elbor - their doors also have progressive burglary protection and good reliability characteristics in general. However, the main difference lies in the price category: if Elbor is focused on producing doors for all three price segments, then Stal does not have very expensive models in its arsenal. But there is well-deserved love from users, who all speak positively about the company’s products.

Professionals do not lag behind happy consumers, noting that although the company has some “flaws” in the form of unsuccessful models for apartments and private houses, it is still an exemplary mid-level manufacturer.

Advantages:

• variety of options exterior finishing doors;
• compliance with all preferences and wishes of the buyer;
• good service;
• wide range of goods.

Flaws:

• Some models are not of brand quality.

The best manufacturers of entrance doors in the mid-price segment

5 Fortus

Huge selection of do-it-yourself entrance doors. Over a thousand different style combinations
Country: Germany
Rating (2019): 4.7

The German giant in the production of entrance doors has one interesting trend that differs from the vast majority of its direct competitors. Instead of selling ready-made solutions They accept orders for the production of an individual product, assembled according to all the canons of their favorite childhood designers. Thus, consumers have access to a wide range of choices in terms of the number of door leaves, the complexity of the locks, their degree of burglary resistance, color and material door leaf(metal, wood, combined) and the shape of the fittings, as well as the type of finish.

Through simple mathematical operations, we found out that there are over a thousand options for combining the parameters of entrance doors from Fortus. Consequently, any user will be able to find a door for both an apartment and a private house. According to numerous reviews, the products of this company have high degree reliability, does not suffer from problems with noise insulation and heat retention indoors.

4 Dierre

Great product design. Fast-growing range with a focus on cutting-edge developments
Country: Italy
Rating (2019): 4.8

Dierre is an Italian company producing reliable entrance doors, which is in the elite segment and does not need unnecessary formal introductions. Her main feature– complete reliance on advanced developments, introduced at any convenient opportunity into the design of products. Thus, recent trends have led to the creation of “smart” doors, with the function of locking and unlocking the lock using a remote control (as an example, the Elettra model range).

The second important quality of Dierre doors is their adherence to a special style, within the framework of moderate chic and delicacy. Any design of the door leaf is accompanied by the selection of unique fittings, which gives the product a touch of exclusivity and exclusivity (model At-3). Yes, the cost is very high, but the quality, appearance and reliability completely compensate for this drawback.

3 Guardian

Aesthetic appearance
Country: Russia
Rating (2019): 4.8

A Russian factory for the production of metal doors, which began operations in 1994. It deservedly enjoys the title of the best manufacturer of beautiful doors. Precisely beautiful, since the aesthetics of execution very often interests users in the first place. Regarding the reliability of the products, everything is also good - the door collections have a number of domestic and international quality certificates in the field of fire safety, sound insulation, burglary protection and operational strength.

But among the disadvantages, one can highlight the service that is not the most efficient: according to consumer reviews, malfunctions that arise during use (even minor ones) are eliminated over a long period of time.

Advantages:

• adjusting the door and door frame on top level(gaps are minimal);
• a wide range of products in all price segments;
• product compliance with high quality standards;
• The main filling material is mineral wool board.

Flaws:

• not the fastest service.

2 TOREX

Optimal balance of security parameters
Country: Russia
Rating (2019): 4.9

The company, whose head office and assembly shop are located in the city of Saratov. Production capacity were launched in 1989 – almost before the collapse began Soviet Union. However, over just a few years, the company gained great popularity not only in the countries of the USSR, but also beyond their borders. On at the moment TOREX has eight warehouses in the CIS countries, from which, in fact, the main trade with the world takes place.

From positive traits the company can be noted for its good service, huge variety model series and the highest quality of each individual product. Of course, there is one drawback to all this, and it obviously lies in the high cost. But quality, and the peace of mind that comes with it, comes at a price.

Advantages:

• excellent heat resistance (from 15 minutes to 5-6 hours);
• compliance with all key standards security;
• wide range of goods;
• in most cases - an attractive design.

Flaws:

• high price and expensive service.

1 Elbor

High degree of burglary protection
Country: Russia
Rating (2019): 4.9

You can hear a lot of flattering reviews about the doors of the Elbor company and, it is worth noting, very deservedly. The plant began operating back in 1976, but did not specialize in the production of doors - in those days, all enterprises worked for the benefit of the defense power of the Land of the Soviets. Have a better start It’s impossible to imagine reclassifying the country’s defense industry as producing an almost defensive element of personal space. It is this fact that determines the high quality of metal entrance doors, the main merit of which is their almost complete immunity to burglary. However, in other aspects the models from Elbor show themselves to be good. The only drawback is the high cost of the products, which essentially excludes the presence of doors in the lower price segment.

Advantages:

• original design aimed at increasing the security of doors against burglary;
• main type of filler – mineral wool;
• use of fire-resistant coatings;
• excellent appearance in all five model series.

Flaws:

• high cost of production.

How to choose a reliable entrance door

Choosing a good entrance door is a matter of responsibility and personal consciousness of each user. Of course, you can resort to the proven method “the more expensive the better,” however, if finances do not allow you to purchase a premium product, we recommend paying attention to the following characteristics for independent choice entrance door:

Basic number of locks. If you do not want to make an individual order, but have to choose from a limited number of models, give preference to doors with several installed locks. It is desirable that they represent fundamentally different mechanisms - if one of the locks is opened, there is a guarantee that the second will create a problem for a conditional burglar.

Availability of additional locking elements. The optional inclusion of locks such as an ordinary latch (or, at worst, a simple chain) will be a nice addition and a bonus to protecting the door during a break-in attempt.

Type of door hinges. IN lately Hidden hinges, embedded under a decent layer of metal for the same security needs against burglary, are especially popular. However, the installation of such elements increases the overall cost of the structure and the work performed. Therefore, if you have limited budget, you can neglect hidden hinges (or save on other options).

Type of external finishing. A parameter responsible not so much for safety as for neatness appearance front door. Finishing with fabric and wood is acceptable for private houses, when safety is guaranteed already at the stage of entering the courtyard area. For apartments, preference should be given to metal doors with fire-resistant powder coating, which gives the doors additional strength.

Insulating material. The presence of an insulating filler determines the door leaf’s transmission capacity to noise and cold/hot air. The most optimal material is mineral wool, which almost completely absorbs external noise and ensures heat retention inside the corridor. Cheap doors have no filler at all.

No room can be imagined without a durable and beautiful door. And if we are talking about an apartment, then it must also be very durable, ensuring the protection of property owners and the safety of their property. Marka.guru offers its rating of durable and durable entrance doors from the best manufacturers and at affordable prices.

The best entrance doors are metal models that can withstand heavy loads.

It is also important to have modern locks with unique secrets that are difficult to open with master keys.

To choose really good doors you need to pay attention to the following points:

1. Warp. No soft or thin metal, choose only high-strength steel, which additionally has good performance heat and sound insulation. These doors are very heavy. The cost of the product varies depending on the thickness of the steel; the optimal thickness is considered to be a sheet of 2-3 mm.
2. Finishing. Can be used as a design different materials– plastic, MDF, powder coating, varnish, paint, wood. They have aesthetic and functional features.
3. Opening. You need to decide where the handle should be and which way the door will open. The direction can be internal, external, left, right.
4. Fire and moisture resistance. Metal entrance doors are exposed to environmental influences, which means their coating must be resistant to any influences.
5. Noise and heat insulation. For this, light but effective fillers are used, which affect the final cost of the product.
6. Locking mechanism. Locks must be reliable and durable; there are 13 burglary resistance classes.
7. Accessories. Cheap products quickly fail and have an unaesthetic appearance. It is important to choose the right strong chains, loops, eyes and handles.
8. Quality. When choosing steel entrance door models, give preference to manufacturers who provide a guarantee on their products, including fittings, trims, and leaves.
9. Service. To install the door, experts advise contacting experienced craftsmen.

There's plenty to choose from

Our rating of manufacturers will help you choose the best and strongest door for your apartment or house. Manufacturers themselves try to offer high-quality models in different price categories. However, as practice shows, especially in big cities, you should never skimp on this element of housing and security. The best high-strength entrance doors must fully meet all the requirements of domestic realities.

1. ASD

Doors from this manufacturer can be purchased for an average of 17 thousand rubles. However, the price can vary greatly depending on the configuration, materials and accessories used, product dimensions, and so on. The disadvantage of the door is that when ordering other, non-standard shades of panels, you will have to pay extra and wait another 2 to 4 weeks for your order.

Advantages of the model:

• laconic style;
• good quality/price ratio;
• durable and lightweight;
• provides reliable protection;
• possibility to choose the color of the panels;
• The thickness of the steel used is 1.5 mm, and the thickness of the blade is 50 mm.

Used as the main material durable metal, there is an armored lining around the perimeter. Additionally there are two sealing circuits and a night valve.

Prices for Entrance metal door Economy Asd:

2. BRAVO

The average price of popular models from this manufacturer is 13,100 thousand rubles. For this money you get a durable door with high-quality fittings. The entire system will last a very long time due to its advantages:

• light door;
• powerful loops;
• high quality fittings;
• use of high quality steel;
• use of powder paint for exterior finishing.

Pretty good steel doors, but there are much better options.

If you live in a disadvantaged area, then a steel thickness of 1.5 mm will not be the best option.

And this is even taking into account the fact that the fabric is produced by pressing without welding. The inside is filled with a basalt slab.

Prices for Entrance door Yoshkar P-09 Wenge BRAVO:

3. ProfMaster

The Moscow company ProfMaster has been working in the field of entrance doors production since 1998 and has managed to earn a good reputation, which is confirmed by numerous positive reviews from satisfied customers. It is known mainly for its “Nord” series, made using thermal break technology, which provides exceptional thermal insulation: the doors are designed for outdoor use, do not sweat, and do not freeze. However, among the entrance doors for apartments there are also interesting models, both in terms of functional characteristics and visual features.

Key competitive advantage– production of doors according to individual orders. The buyer receives:

• freedom in choosing the thickness of steel, locks, finishing materials;
• the ability to produce fabric of any non-standard size;
• unique design project.

At the same time, prices remain quite affordable due to the absence of intermediaries. Production times vary from 3 days to 10 days depending on the complexity of the project. For those who don’t want to wait, the manufacturer’s website offers a selection of finished products.

Among the shortcomings, it should be noted that the company is more focused on the production of custom doors. If you need a specific door today, then this can become a problem, because it can only be made to order.

Prices for Doors ProfMaster:

4. Guardian

On average, you can buy Guardian doors made of steel for 21 thousand rubles. The models of this manufacturer have many advantages, including the technologies used. Depending on the configuration of each model, its price may vary significantly. The main advantages of Guardian are:

• reinforcement of the canvas;
• use of high-strength fasteners;
• availability of quality and compliance certificates;
• robust and stable system.

For many, the disadvantage will be the high price of manufacturers' products, however, it is worth it. You receive a door that has the following characteristics:

• made from two cold-rolled steel sheets;
• anti-removal clamps and trapezoidal stiffeners are installed;
• mineral wool inside;
• two locks and two seals.

Good sound insulation performance, doors meet reliability class M1.

Prices for Metal door Guardian series DS 2:

5. Elbor

Looking through the review of this model, I would immediately like to note its strict and laconic design, sometimes even reminiscent of old solutions. But in some cases, the main thing is not design, but quality and durability. Elbor is enough good decision, and you can buy a door for an average of 15 thousand rubles.

The advantages of the product include:

• use of thick steel;
• high-quality finishing materials;
• several opening options;
• the presence of several locks;
• installed peephole.

For many, the disappointment will be the small selection of design solutions and rather outdated color options. But, you buy a door in which:

• 1.8 mm thick steel was used;
• oak interior trim;
• door frame 110 mm thick filled with basalt slab.

In addition, the product has three sealing contours, an armor plate and three durable hinges.

Prices for Elbor Doors:

6.TOREX

• modern and futuristic design;
• good selection of colors;
• use of different patterns;
• favorable prices;
• use of imported equipment and components.

The models of this brand were included in our rating as the most controversial and controversial. The reviews left by owners of the manufacturer's products are contradictory. Some say that there are enough problems with them, while others are completely satisfied with their purchase. According to the company, only high-quality materials are used.

Other characteristics:

• the thickness of steel sheets is 1.5-2 mm, and the thickness of the sheets is from 70 mm;
• a wide choice of width and height of the product, there are double-leaf models;
• For finishing it uses MDF and PVC.

Prices for TOREX Doors:

7. Outpost

The company's products are inexpensive models that can be purchased for an average of 8-9 thousand rubles. Naturally, they require a separate strength test, because for such an amount it is doubtful to purchase a quality product. Although the manufacturer guarantees:

• after-sales service;
• installation with guarantee;
• large selection of components;
• own distribution network.

The disadvantage of the product is that it budget option with all that it implies: poor burglary resistance and sound insulation.

But in the package you get:

• two castles;
• standard product sizes;
• large selection of colors;
• modern design;
• reliable locking systems;
• seal contours;
• some handles with backlight system;
• automatic locking.

Prices for steel door Soyuz-51 Outpost:

8. Neman

In the ranking of durable metal entrance doors they are not in last place. And all this is thanks to the thoughtful work and equipment of the models, however, you have to pay for it and on average it is more than 45 thousand rubles. For the money spent you get:

• high burglary resistance;
• individuality and thoughtfulness of each model;
• good reliability;
• product durability;
• application modern equipment for the production of doors;
• high-precision and high-quality models;
• manufacturer's warranty;
• compliance with established standards.

Perhaps the only drawback of the products of the presented brand is the high price of the products. They are provided with:

• five protection classes;
• minimal gaps;
• high quality locks;
• anti-burglary systems;
• multilayer high-strength panels;
• overhead protective loops;
• armor plates.

Prices for Entrance door Neman:

9. BECAME

Another option for inexpensive models that can be purchased for an average of 10 thousand rubles. but is it worth purchasing such a door? The manufacturer claims it’s worth it, because despite the fact that these are budget models, it guarantees:

• quality products;
• hardy locks;
• conservatism and conciseness;
• large selection of design and color options;
• additional protection against burglary in the form of linings and hinge protection;
• high-quality and durable components.

Oddly enough, the disadvantage of the brand’s products is the price. It directly says that you can’t expect high-quality products. The burglary resistance and noise insulation indicators are not the best.

If we talk about technical specifications, then it is worth noting the presence of all standard sizes The thickness of the canvas is 50 mm, and the thickness of the sheets is 1.5 mm.

Prices for The front door STEEL:

10. Legrand

Doors from this manufacturer can be purchased for an average of 30 thousand rubles. The brand's products have many more advantages than disadvantages. Among the main advantages it is worth noting:

• use of high quality steel and fittings;
• warranty for the products provided from the manufacturer;
• long service life of all parts, systems and elements;
• standard sizes;
• usage additional elements to increase security.

As with many other rather expensive models, main drawback Legrand is their price. However, it is worth exploring general characteristics products and you might decide it's worth it.

• thickness of sheets of cloth - 1.5 mm, steel sheet - 50 mm;
• the presence of additional armor plates;
• two sealing circuits;
• night valve;
• laminated MDF, veneer;
• locks of different security classes;
• reinforcement of the lock and locking part (4 and 3 mm, respectively).

Prices for Entrance doors Legrand:

The best modern metal doors cannot cost 10-15 thousand rubles. For the money, they may be beautiful and feel like rugged models, but they do have weak points. If you are willing to spend an order of magnitude more, you can provide your home with much greater security. If you want to install the best steel entrance doors to your apartment, then get ready to pay 50-70 thousand rubles. or more. But an armored door can fully protect you and your property.