Operating instructions for ballu heater. Infrared heaters "Ballu": instructions, characteristics, reviews

The heating system installed in the room may not always be enough to heat the entire area.

This is especially true for a centralized pipeline, through which utilities can save on consumers when the room temperature is even below the minimum.

In such situations, the most affordable and convenient way out of the situation may be to purchase an electric heater.

Ballu electric heating convectors are one of the most common types of such heaters and can easily provide heat to rooms of different sizes.

To select a device that is suitable specifically for you, you need to consider the design of Balu heating equipment, their pros and cons, as well as consider the criteria for choosing the right model and user reviews.

1 Design and purpose of Balu convectors

Ballu convector is different reliable design and high-quality assembly. For a better understanding of the work heating equipment, its structure should be considered.

What the convector consists of, we will look at the example of the convector ballu bep e 2000:

1. The protective casing (housing) of the convector is made of metal alloy and painted with special heat-resistant paint. On the casing there is an entrance for the intake of cold air, and a grille for the exit of hot air;
2. A heating element (heat exchanger), which is also called a heating element. Key element of the device. The manufacturer offers different types Heating elements, depending on the model. Open heating elements (ballu plaza convector), which are more efficient, and closed heating elements (ballu 2000 convector);
3. On the body there is a temperature regulator, a toggle switch for convector operating modes, as well as an informative display, on some models (ballu bec evm 2000 convector), or an indicator of the operation of the heating element;
4. The control board, which is the “brain center” of the device.

Ballu heating convectors are primarily intended for residential premises, in order to improve the microclimate and increase the temperature level during the cold season. In addition, the ballu bep e 1500 convector can be used to organize heating of small buildings (shops, offices, greenhouses, etc.).

The principle of operation of Balu convectors is simple, but quite effective, it lies in the fact that cold air enters the system and passes through the heating element of the convector, then after heating the warm air rises and spreads evenly over the entire area of ​​​​the room.

Electric convector ballu camino practical and universal device, which has only one prerequisite for normal functioning: the presence of a constant source of electricity.

2 Advantages and disadvantages of Balu convectors, their prices

The ballu electric convector is distinguished by excellent quality and an affordable price for the domestic, average user.

In addition, devices from this manufacturer are characterized by a number of other advantages, including:

• Ergonomic and modern design designs;
• The presence of electronic control and monitoring systems that allow you to set the required temperature level, as well as establish a favorable microclimate in the room;
• Transportability. The convector Ballu bec mr 2000, like most Ballu models, has wheels for easy movement of the device, as well as the ability to replace the latter with legs, for floor installation. Apart from this, you can make a benefit in the direction of recruiting for wall installation;
• Convector ballu 1500 and other products model range the company is practically silent in operation;
• The ballu 1000 convector has a 3-year manufacturer's warranty. In addition, after the warranty period expires, you can easily find spare parts, if necessary;
• The operation of the Balu electric convector is much more efficient than conventional oil heaters. Moreover, convectors do not burn oxygen, therefore they are completely safe.

It is much more difficult to find shortcomings in these devices. The only factor that cannot be unequivocally accepted is electrical energy as a heat source. IN certain situations the cost of such operation may be too high.

The price of a ballu convector is affordable for everyone, and can cover the disadvantage of high electrical energy consumption. The ballu bec m 1000 convector costs 3,000 rubles, the cost of other Balu models ranges from 2,000 to 5,000 rubles, depending on the model and the availability of additional options.

In order to buy convectors ballu It is necessary to decide on a number of key points, including:

1. Power of Balu convectors. Here it is important to know the exact area of ​​the room that needs to be provided with heat. If for rooms with an area of ​​5 to 10 square meters 0.5 - 1 kW is enough, then for larger rooms (from 12 to 23 m2) it is better to give preference to convectors that have a power of 1.5 - 2 kW. In this situation, you should not buy a device with power “with a reserve”, since the electricity consumption will not please you;
2. Type of heating element. Closed heating elements have lower efficiency and, accordingly, require more time to heat them up. At the same time, they are safer, as they prevent heating of the casing and other external parts of the convector. Open heaters are more relevant when heating speed is important;

• Completeness of the goods. If you are not purchasing a convector from an official manufacturer or its dealer, you should check the kit: original packaging (along with the appropriate markings), warranty card, technical passport, as well as removable legs and fastener for wall mounting (on some models).

How to read the operating instructions correctly?
When purchasing any type of equipment, you will by default receive an instruction manual or user manual for it. We strongly recommend using and carefully studying these types of manuals and instructions. This is how you can achieve the most efficient operation of your device. Despite the fact that most of the guides are generally clear and understandable, we still suggest that you familiarize yourself with some recommendations and tips for the most convenient and convenient effective use any equipment.

Why do you need an instruction manual?
Operating instructions and various manuals User Guides are special documents designed to assist people in using certain equipment.

Search for the required operating instructions on the Internet.
Use and Maintenance any equipment, as a rule, does not cause you any difficulties if you have at hand necessary instructions instruction manual or user manual. Of course, the easiest way is to use the instructions or manuals that are supplied initially with the device you purchase. However, such instructions may be lost or simply do not include certain information that you need to this moment. Of course, you can always find necessary instructions in the Internet. Nowadays, there are many reliable websites like our site that offer huge collections of free user manuals and instructions of various kinds. But among this variety of files, it is important to find the truly necessary, correct manual.

Today they are so popular that they are widespread in almost all areas of human life. Not so long ago, only wealthy buyers could purchase them, but today different models this type is available to almost everyone. They are manufactured in many countries, but you should choose a manufacturer that has proven itself in the market.

Infrared heaters“Balu” are presented for sale in a wide range. They serve long years, do not require repairs and perform their tasks without complaints from the user. If we compare with traditional convectors, these devices differ radically: they heat surfaces and objects in the room rather than the air.

Today infrared heaters “Balu” are very popular. You should be aware of the reviews and heating area of ​​these devices before purchasing. Such devices can be compared to an indoor Sun, because the radiation of the unit is similar to its rays. Infrared waves are long, so they are perceived by the skin as heat that comes from the Sun. In order to decide which model to choose, as well as to know how to extend its service life, you need to familiarize yourself not only with the characteristics and instructions, but also with consumer reviews.

Reviews of infrared heaters of the Balu brand, BIH-APL series

Infrared heaters "Balu", reviews of which you can read in the article, are presented to the attention of consumers with models from BIH-APL series. In this case, we are talking about the most compact and economical devices for directional heating. According to buyers, such devices are simply irreplaceable for local heating of individual zones.

From customer reviews, it can be understood that Balu infrared heaters are suitable for rooms with poor thermal insulation and high ceilings, where the use of traditional heating is ineffective. As an example, consider the BIH-APL-0.6 model, which is new development and will cost the consumer 2200 rubles. The heating power is 0.6 kW, and the supply voltage is 220 V. Consumers are advised to install these devices at a height ranging from 2.4 to 3.5 m. If space in the room is limited, then you need to pay attention to the dimensions of the device, which are equal to 885 x 40 x 130 mm. Consumers claim that installation of the unit will be quite simple, because its weight is only 2.2 kg.

Reviews of BIH-LW series models

Infrared heaters "Balu", the price of which is quite reasonable, are also offered for sale in BIH-LW series. Consumers like these lamps, which are versatile and great for heating semi-open or indoor spaces.

The heater can be installed on almost any wall surface. According to consumers, this is quite easy to do using the bracket that is supplied by the manufacturer. One of the models in the series is BIH-LW-1.5, which will be discussed below.

Technical characteristics of the model BIH-LW-1.5

This Ballu heater will cost the buyer 1,600 rubles. Its heating power varies from 500 to 1500 W. The device can be installed in a room with an approximate area of ​​25 m2. Connection to the network is carried out using a power cord with a plug. The dimensions of the device including the bracket are 560 x 165 x 120 mm. The unit weighs only 1.7 kg, so with installation work There shouldn't be any problems.

The manufacturer provides a one-year warranty on the heater, so you can be sure of the quality, because during this time you can check the functionality of the device. As additional functionality, we can highlight the ability to turn on and switch between operating modes, and you can use remote control. Consumers claim that the device provides targeted, powerful heating. Even in windy and cold weather, you can hope to maintain efficiency.

Reviews of Bali series heaters

Universal infrared heaters are equipment that is manufactured by the company under Bali series. Users believe that these devices are excellent for heating semi-open and closed spaces.

The unit can be installed on almost any surface using brackets and a steel telescopic tripod. Consumers emphasize that this allows the device to remain mobile. These units can be used to heat bars, country houses, summer cafes, apartments, garages.

Technical characteristics of the BIH-L-2.0 heater

This Ballu heater belongs to the series described above. It will cost the consumer 3,000 rubles, and the heating power is 2 kW. The maximum installation height can reach 3.5 m. The equipment is powered from a mains voltage ranging from 220 to 240 V. The dimensions of the device are 740 x 180 x 90 mm. The unit weighs 3.5 kg.

Reviews about heaters of the BIH-AP2 series

Infrared heaters "Balu" are offered for sale in a wide range. Sometimes consumers cannot make a choice, since each model has its own positive sides. According to users, the BIH-AP2 series models are compact, economical and capable of providing directional heating. They can be used for local heating of a specific area, installed in a room with high ceilings and poor thermal insulation. In these cases, the use traditional ways heating can be ineffective.

Consumers who have already appreciated the advantages of these models note that they are characterized by low energy consumption. The kit includes brackets that provide quick and easy installation to the ceiling and wall. Among other things, threaded rods and even cable can be used for installation.

Technical characteristics of the model Ballu BIH-AP2-0.6

This infrared ceiling heater “Balu” costs 2,400 rubles. Its power is 0.6 kW, while the maximum installation height is 2.2 m. In order to allocate free space, you need to know what dimensions the equipment has. For this model, the dimensions are limited to the following parameters: 885 x 40 x 130 mm. The device weighs 2.3 kg.

Operating instructions for infrared heaters from the manufacturer "Balu"

Infrared heaters "Balu", the operating instructions of which are supplied, must be used taking into account the manufacturer's requirements. Thus, devices should be protected from dust, moisture and impacts to the housing. Particular care must be taken when handling the heat-insulating plate.

Before performing maintenance or cleaning the device, it must be disconnected from the electrical outlet. If you plan to install the unit on the surface of a wall or ceiling, you need to take care of the heat resistance of the coating, which should be 80°C. Connecting the device to the electrical network must be done using a power cord that has If you want to connect the unit to fixed wiring, you must provide a disconnector that will ensure that the equipment is disconnected from the power supply.

Balu infrared heaters must be moved with extreme caution. In this case, falls and impacts should be avoided. In order to avoid harm to humans electric shock, you should avoid replacing a damaged power cable yourself. This should be done by specialists service center. The power cord must not touch hot surfaces during operation or storage of the device. The heat-insulating plate should not be wiped with flammable liquids during operation. It is unacceptable to install the heater in close proximity to an outlet.