Original flower beds made from tires. Tire flowerbeds: manufacturing ideas

With the return of fashion for all kinds of vintage, let's remember the cute old way of framing garden beds with circles made of tires. Tires that have reached the end of their driving life are easy to get, simply cut and painted with your own hands, and you don’t mind replacing them with new compositions. Take a look at the photo - these are the kind of unusual installations you can make at your dacha, giving your yard a unique charm.

It just seems that a flower bed made from a tire is out-of-date and cumbersome. In fact, if you wish, you can create a real work of art from tires, and with minimal costs, which is relevant at current prices for everything. In addition to the penny cost, such a flower bed has a number of other advantages.

Advice. Choose tires from foreign manufacturers - they are much more flexible in operation.

Having come up with the concept of a future flower bed, place the tire on a hard surface (asphalt, concrete, a piece of hardboard - whatever you have) and draw a line with chalk on its side surface along which you will cut out the excess. Cut out the outline with a knife or jigsaw. Degrease with white spirit and paint immediately before dust sticks to the rubber.

It is better to paint first with white paint, then with colored paint: this way the finishing color will be brighter and more even. Using two or three colors, you can create a pattern. When the paint has dried, you can fill the flowerbed with soil and plant the plants.

Tires can be placed directly on the ground, hung on chains or cables, or folded into pyramids. It is better to select plants with a small root system: crocuses, marigolds, begonias.

Attention! Before work, thoroughly clean the tire from dirt, even rinse it under strong water pressure: this will protect the tools from quickly becoming dull.

How to easily unscrew a flowerbed tire

When arranging a flowerbed, the tire can be presented to the viewer not only externally, but also inside. A tire turned inside out makes a flowerpot “a la Peterhof”, and if you paint it like marble, no one will guess its origin.

To make a flowerpot you will need not a tire, but a whole wheel with a disk. Draw a wavy or jagged line on the sidewall of the tire, which will become the outline of the petals, cut it out and start turning it out.

To do this, lay the wheel with the cut side down, step on the disk with your foot and consistently turn the edges of the rubber upward. This is a job for a man, it requires considerable strength and the protection of hands with thread gloves. Watch the video to see how this operation is performed. The result will be a flowerpot on a rounded metal leg.

Advice. If you plan to turn the tire inside out, it is better to take tires with maximum tread wear: they are significantly softer.

Apply paint to it, and not just to outside, but also on the inside, just below the level to which you plan to fill the soil. Since the flowerpot will be raised above the ground, it can be planted with hanging plants: petunia, fuchsia, bacopa.

The most original ideas for flowerbeds made of tires

The pliability of rubber and the flight of imagination of a gardener who is not burdened with extra money work wonders. Here are a few examples that are quite original and very simple ideas flower beds made from waste tires.

• Wall flower bed. The tire is used in a vertical position. To do this, screw it to the wooden wall barn or bathhouse. A duet of lushly blooming ampelium (nasturtium, petunia) and climbing plant(beans), from the shoots of which you can lay a bright green wreath on top of the tire.
• "Flower Mountain" This is a large structure for those who have a large plot and have accumulated a lot of old tires. There is no need to cut them or turn them inside out: wash them, paint each one its own color and arrange it into a composition. At the base of the “mountain” rest 6 tires, on them – 5 pieces, above – 3 pieces, the mountain is crowned with one tire, preferably of a smaller size. In each you can plant flowers of a certain type.

• Hanging planter « Bird of paradise" The tire is cut into strips, from which the tail and handle for hanging are subsequently assembled. The beak, eyes and crest are glued with rubber glue. The finished bird is brightly painted and varnished, except for the inner part intended for soil and plants. Small flowers are planted in poultry, for example tagetes.

Your own garden is exactly the place where you want to show your imagination and individuality. You can decorate it with anything, any old things that usually accumulate a lot at the dacha. Try making a flower garden from a car tire: time will fly by, and the result will please everyone.

Old worn-out car tires have found an unexpected use: they make original flower beds. You can simply put the tire in the flower garden, fill the inner space with soil and plant flower seedlings. Can you apply creativity and create an interesting composition from several rubber tires. If you use your imagination, an interesting plot with animals, birds, insects or kitchen utensils will appear in the front garden.

What types of flowerbeds are there from tires?

It is difficult to create a sophisticated landscape from rubber tires, but it is quite possible to revive a flower garden, make it more well-groomed and interesting. Which flowerbed to arrange depends on the number of tires, their size and free space.

Types of flower beds made from car tires:

Tires can be used as an independent flower bed or as a part of a large flower garden, for example, a mixborder. They are placed in a predetermined order, not necessarily symmetrical, and vegetation is planted both inside and between the tires.

How to make chamomile

Flower- the most popular type of flower bed made from an old tire. To create a daisy you will need 5-6 tires of the same size and 1 slightly larger (or smaller) diameter. In the area where the flower garden is being set up, identical tires are laid out in such a way as to form a closed circle of the correct shape. After this, a large tire is placed on top of them, in the center. It is outlined with chalk and removed. As a result, a chalk mark is left on the lower parts, along which trimming is carried out. It is advisable to cut off only the upper sidewall and tread area, leaving the lower sidewall.

After this, the trimmed parts of the “daisy” are again laid in a circle (with the uncut side to the ground), and the middle tire is placed in the center. The end result is a flower consisting of a center and petals. All that remains is to pour soil inside the flowerbed and plant flowers. You can plant flowers in the center yellow(nasturtium, tagetes), and around the edges white petunia, alyssum, or other low-growing annuals.

Flowerpot

To do flowerpot, you will need to turn the tire inside out. Since this work is not easy, this should be done by a person with sufficient physical strength, or by inviting someone to help. The tire is laid flat on flat surface, and markings are made on the side. It’s easier to do it by preparing a template from thick paper in advance. A stencil cut in the shape of triangles or semicircles is pressed tightly onto the rubber and outlined with chalk. According to the markings, using a sharp knife with a comfortable handle, the petals are cut out, and the cut part is set aside.

Advice. The width of the petals should not be less than 10 cm, otherwise the flowerpot will become deformed over time.

The tire is turned over with the cut side down and the process of “fighting” with it begins. Having stepped on the edge of the tire with your foot, you need to grab the cut edge of the workpiece with both hands and forcefully pull it up and towards you.

When the convex part turns out, you should try to hold it so that it does not return to its original position. Things will get easier after completing half the circle.

Dirt accumulates inside the tire, and it is easier to wash it off when it is outside, that is, when the tire is turned out. After drying, the flowerpot is painted, set in place and filled with soil.

Video instruction:

Swan

Having gained experience in creating simple structures from tires, you can begin to create more complex products, for example, making a swan. The first stage is marking. The reality of the bird depends on how correctly it is performed. Most of the lines are drawn on the working path of the wheel: the tail, body, head and beak of the bird. Fenders are drawn on the sides of the tire.

It is recommended to start cutting out the swan with the longest straight lines. Thanks to this, when small parts remain, most the rubber will be cut off, and the “jewelry” work will be easier to complete. You should also be careful in particularly critical areas (neck, wing feathers, beak) so as not to make the wrong movement and spoil the workpiece.

It is much easier to turn out a tire with a carved swan than a flowerpot. The main thing is not to use too much force and not tear off any part.

All parts of the bird are in a stable state, except long neck. To prevent it from falling, holes are made along its entire length at intervals of 5 cm, metal brackets are inserted into them, after which a thick wire is pulled between the brackets and the rubber (a wire rod can be used).

The wire is bent in the desired position to make the bird's neck look graceful. Finally, the swan is painted suitable color: white, black. Naturally, the beak should be red.

Video instruction:

Cups

2-3 tires placed one on top of the other will turn into a cup if you make a handle on one of the sides.

A strip 5-8 cm wide is cut out of the tread, one end is bolted to the bottom tire, and the other to the top. The cup is installed on a pre-cut side part tires like on a saucer. A teapot is made using this principle, but you also need to attach a spout to it.

To make the teaware more realistic, you can use tires of different diameters and cut off the side part on the upper parts. Cups with a teapot are painted accordingly: with large polka dots, Gzhel, with floral patterns.

Whether or not to plant flowers inside depends on the situation. If there are enough other flower beds in the garden, it is better to leave the dishes as is, and when there is little space for a flower bed, they can be made in cups.

Any tires are suitable for making garden figures: summer, winter, domestic, foreign, but not new. If the tire is in the process of being manufactured garden figure will turn out, you should choose the most worn out protectors. The lack of relief and abrasion of the rubber makes cutting the material much easier. In addition, such a tire is easier to turn out.

Tips for beginners:

The rubber of car tires is reinforced with nylon or steel cord. Nylon is cut with a knife, but for cutting metal you should prepare metal scissors or a grinder.

The marking will help you recognize what type of cord is in the wheel: if it is marked “steel”, then there is metal inside.

A flowerbed in the form of a daisy, a swan and a flowerpot are the most common crafts made from car tires. But besides these, there are many other ideas. You can make any animal whose body even vaguely resembles a circle or oval.

Turtle. A tread is cut out of a small tire and divided into 4 equal parts. Each of them is inserted into slots on a tire that imitates the body of a turtle - these will be the animal’s paws. The tail is made from a small rubber scrap, and the head is made from a plastic bottle.

The turtle is painted, the animal's eyes and mouth are drawn on the bottle, and a straw hat is put on the head.

Hedgehog. It is easier to create than a turtle, since it is not necessary to make paws.

A small tire is painted in gray, a part of the bottle with a neck is glued to one of the sides and the face of an animal is drawn on it. Plants with narrow, needle-like leaves, such as cypress spurge, are planted inside the tire.

Spider. It is made according to the same principle as the turtle. The difference is that the tires for the paws are cut not into 4 parts, but in half (you need to take 4 tires to get 8 legs). The “face” is drawn directly on the tire, which simplifies the process of making the figure.

You can make any figurine for the garden: a frog, a bunny, a dog. Other birds are also made using the same principle as a swan: parrots, chickens, ducks.

The easiest way is to put an old tire on the plot, throw some soil there and plant seedlings. This is, of course, simple, but it doesn’t look like an exclusive decoration. Well, let's try to improve the situation. Take bright acrylic or oil paints, we will select several of them that are most compatible in color and paint several tires. Then we’ll install them on top of each other and get a wonderful multi-level flower bed.

Original vertical flower bed DIY tires are created from several tires of different diameters, stacked on top of each other like a pyramid. You can put a flower pot on top if you don’t have a small tire on the farm. After painting and filling internal space tires with soil, you can grow ampelous plants, for example, petunia or strawberries, in the resulting flowerbed.

Flower beds made from tires can also be hanging. Attach a strong metal chain (thick cord, rope, etc.) to the tire and hang it on a tree. In order to be able to pour soil into the flowerbed, the bottom of the tire must be covered. For example, fix inside a flowerpot with a diameter slightly larger than the inner circumference of the tire. Or put a thick piece of rubber inside - think for yourself, there will probably be a material suitable for covering on the farm.

A snow-white hanging flowerbed made from a car tire is a spectacular “highlight” of modern style

And if you get a little creative, you can make a composition out of tires on the theme of... well, for example, homemade tea party. Several tires will perfectly play the role of a teapot and a cup - just complement them with simple details - cutting a pipe and bent pieces of metal tape.

Turtle flowerbed - fun creative

From a tire and tread, cut into equal 4 parts, you can make a flowerbed in the shape of a turtle. We make cuts in the sides of the tire and insert tread scraps there - these will be the turtle's paws. We secure them with wire staples. We cut out the tail from a piece of rubber and also secure it with staples. For the neck of the turtle, take a piece plastic pipe, on which we secure a head made of crumpled newspapers with tape. You can put a straw or plastic panama hat on your head.

This do-it-yourself bed of tires must be painted according to all the “turtle” rules, otherwise it will not be clear what you wanted to depict. Draw eyes, a mouth on the head, paint the torso and paws in a bright color.

Flowerbed made from an inverted tire

Flowerbeds made from inverted tires resemble pot-bellied round flowerpots, to create which you will need:

1. Cut out a design of flowerbed petals on the top of the tire

Petals can be rectangular, triangular, round and even wavy. To begin with, they should be drawn with chalk or soap, and then cut out using a sharp knife, hacksaw or jigsaw. If you decide to use a knife, we recommend that you moisten it with soapy water while working - this will make it easier to overcome the resistance of the dense rubber.

Carefully cut out the petals using any sharp cutting tool

2. Turn the tire inside out

Many people are interested in how to turn a flowerbed tire inside out, because this is not an easy task and requires considerable effort. To do this, you need to turn the tire upside down with the side on which we did not cut anything, grab the cuts from the bottom with your hands and, pressing on the tread, carefully turn it out. Once you've done about half of the tire, flatten it into an oval and easily turn the rest out.

3. Paint the flowerbed in a spectacular color

We paint the resulting flowerbed in any color that will be in harmony with the rest of the landscape objects on your site. You can settle on a single color, but multi-colored ones, for example, in the form of stripes or a bright pattern, will look more impressive.

Vases on a leg - a more complicated option

Let's look at how to make a flower bed out of a wheel. This means that to create a flower bed we will use a tire with a metal disk in the middle. To do this, place the wheel on a flat surface and cut out the pattern of the petals, reaching with a knife (or other cutting tool) to the tread.

Then we turn out both the upper and lower parts of the tire without removing the disk. As a result, you will get a kind of flowerpot in the form of a flower on a leg, into which soil is poured and plants are planted.

After this, you need to take care of how to paint the flowerbed from the wheel. The upper part can be painted in a bright “floral” shade, and the lower part in green. Then a huge rubber flower with living plants in the middle will bloom on your site.

Master level - flowerbed in the shape of a swan?

A swan flowerbed is made similarly to a flowerpot made from a tire, the only difference is in a more complex cut out design. If for a flowerpot it was necessary to form the same type of petals, then here - the wings, tail, neck and head of a swan. We transfer the diagram to the surface of the tire and begin to cut out the figure of a swan. The head and neck are cut out along the black contours, the tail along the red ones, and the wings along the blue ones. After this, the tire is turned out in the same way as in the two previous cases.

We make a beak from a piece of rubber (wood, plastic or other material) and paint it with red paint. We put the two halves of the head together, insert the beak between them and secure all parts of the head together with self-tapping screws. We screw in self-tapping screws on both sides of the head in the places where our swan's future eyes will be. Then, so that the screws are not visible, they are covered with two circles cut out of black electrical tape - these will be the eyes. Raise your head straight and up, slightly pressing it into the tire. This creates a fold, which also needs to be fixed with self-tapping screws.

At the last stage of the work, the swan is painted - here you can show your imagination and come up with any color for the bird’s plumage.

Spring, flowers, the beginning of the dacha season...What do you want to do in the first days of arriving at the dacha? Of course, decorate it. The best decoration everyone suburban areas There were always flower arrangements.

To do this, you can simply buy stereotypical flowerpots and plant them with flowers. But you can put in a little effort and make your site individual and different from everyone else.

Old tires are a wonderful material for such creativity. Instead of throwing them to the curb, you can give them a second chance. Free time, a little imagination - and old car tires will turn your suburban area into a fairy tale!

What can be made from old wheels

The simplest flower bed- this is the wheel in it in its original form, laid on the ground and painted. This has long been a boring option for the lazy.

By connecting desire and imagination, you can make such flowerpots and flower beds that no one will even think about what they are made of.

All these garden architectural forms (pot, flower bed, flower garden) have some differences among themselves:

Which tires are better to choose?

It's great if you have plenty to choose from. The right choice old tire will make the job much easier.

Here are some conditions to consider when choosing:

Making a flowerbed from a wheel with your own hands

Let's consider step by step instructions for making flower beds from old tire:

1. Start with cleansing tires from dust and dirt. This must be done for the simple reason that working with a dirty surface will dull the tool much faster.

2. Decide what type your product will have, i.e. what forms will be the edges of your flower bed. They can be rounded or wavy, smooth or with sharp teeth.

3. The size of the teeth or petals of the flower bed should not be more than 12 cm, otherwise during the turning process the rubber will not be able to bend sufficiently and the edge of the flower bed will be uneven.

4. Draw outlines on the side of the tire with chalk or a felt-tip pen. To ensure that the lines are even and the petals are the same size, you can use paper stencil. A sharp one is suitable for cutting out tires. shoe knife. It’s even better if the house has jigsaw. With its help, cutting out shaped elements is much easier.

5. After the curly cutting is completed, you can turn the tire inside out. This work is not easy. Thick rubber provides sufficient resistance. The first section is the hardest to turn out. When this can be done, the further process of turning the tire around will be much easier.

Attention! If there are no assistants, press each inverted section with your foot so that the tire does not turn inside out. reverse side and didn't have to start all over again.

Decorating a flower bed

Agree that black flower beds and flowerpots do not look aesthetically pleasing at all. Pick up bright colors and start designing your product. This is exactly the moment when you need to fully use your imagination. Can be combined different colors and shades, and also apply patterns or geometric designs.

Oil paint It will adhere more firmly to the rubber surface if it is pre-primed. This will help smooth out unevenness and roughness of the rubber surface, and also save paint. Primer GF-021 It is quite suitable for a rubber surface, and if you add a little PVA glue to it, the coating will become even stronger.

Advice! Your flowerbed will be much more beautiful if you paint not only its outside, but also its inside.

Various options for decorating flower beds made from tires:

How to choose plants for a flower bed

The flowerbed is ready, all that remains is to pour fertile soil into it and plant flowers. It could be ampelous(with flexible long shoots) and cascading plants such as pelargonium, petunia or tumbelina. Their long shoots, decorated with flowers, will hang down spectacularly.

You can create a whole composition consisting of high plants in the middle of the flowerbed and short around the edges. Low-growing marigolds, petunias, and pansies are great as background plants.

As focal plants in the center you can plant phlox, annual dahlias or flowers that attract attention due to their shape or unusual leaves.

Having tried your hand at creating a flower bed in the form of a flower or a vase, you can begin to create more complex figures and crafts. From old tires you can make flower beds in the shape of a swan, frog, cup, turtle, snail.

In a word, your imagination and ingenuity will help transform your suburban area and make it more beautiful and interesting.

You can watch detailed instructions for making a flower bed from tires in our video.

The desire to ennoble summer cottage plot, transforming it into an attractive cozy corner for comfortable rest, quite natural. A favorite among many gardeners, floral arrangements are an ever-popular element. landscape design suburban areas. A worthy setting for such compositions is often flower beds made from tires, which are one of the easiest products to create and practical to use. Of course, you can purchase ready-made flowerpots in specialized stores. But flowerbeds made from tires created with one’s own hands are not only a beautiful and functional design element that gives exclusivity and uniqueness to the design of the site, it is, first of all, the pride of every summer resident.

How to choose the right tire?

It's great when it's possible to have a choice. When choosing between old tires from a domestic manufacturer and imported products, preference should be given to the latter. Imported waste tires have softer and thinner rubber, which is much easier to work with. If you choose between “summer” and “winter” tires, then the winter version is more suitable for work.

When deciding to create original flower beds from tires with your own hands, turning old waste tires into street vases of fancy shapes, you need to prepare the source material in advance and think about its design

In order to make a flowerbed from an old tire, it is advisable to choose wheels with maximum tread wear. The worn-out tread layer makes the product softer and makes it much easier to turn it inside out.

Tires contaminated with soil and sand must be cleaned. And the point is not even that it is more pleasant to work with a clean product. It’s just that when working with dirty tires, the blade of the knife and file becomes dull much faster.

Step-by-step manufacturing example

Before you start making a flowerbed from a tire, you need to think about what the finished product will look like: a bowl with smooth edges, a flowerpot with a wavy cut line, or a flowerbed in the shape big flower, bordered with petals or fringe.

The drawing, along the contour of which the cutting line will be drawn, is applied to the side of the product

When thinking about the shape of the cut, you must be guided by the fact that the result should be a design based on the “pan-lid” principle: a deep lower part and a cut off upper part. The contour can be easily drawn along the entire circumference with a felt-tip pen or chalk.

The edges of the cut, made with wavy lines or shaped like teeth and fringe, look interesting.

Stage #2 – cutting along the contour

When thinking about how to make a flowerbed from an old wheel, designed in the shape of a large flower, you need to cut out petals along the edge of the product. The size of each petal should not exceed 10-12 cm. Otherwise, when turning the tire out in these places, the rubber simply will not bend, and the flowerbed will not take an even round shape.

You can use a shoe knife to cut the wheel. A well-honed tool will significantly speed up your work

You can make the cutting process easier by using liquid soap to lubricate the knife blade.

It's great if you have a jigsaw on hand. Using a jigsaw, it is convenient and quick to perform figured cutting.

Labor mechanization is described in detail in the video:

After cutting the tire along the contour, along the tread grooves it is necessary to make longitudinal cuts at a distance of 5-10 cm.

Stage #3 - turning the tire out

When creating a flowerbed on a leg out of wheels with your own hands, the first thing you need to do is turn the rubber tire inside out. For many craftsmen, this stage of work becomes a real stumbling block. The process of turning out the rubber itself is quite a labor-intensive process.

In order to cut the metal cord, you need to use a grinder to make several cuts along the outside. Cut through the rubber smoothly. The contact of the disk with the cord can be judged by the plaque formed on the surface of the product and the white smoke emitted. Make the cuts at an equidistant distance of 15-20 cm.

After spending preparatory work, you can start turning the tire out. Before you start turning the tire for your flower bed inside out, we would like to tell you one secret: it is enough to turn at least a small piece of the tire inside out, and the work will go like clockwork.

The turning process is clearly shown in the video:

The flowerbed made from old wheels is ready, you can start decorating it.

Finished product design

Creating and growing flower beds in black forms is not entirely aesthetically pleasing. Therefore, once the flowerbed has been given the desired shape, you can begin to decorate it. Bye outer surface the inverted flowerpot is not covered with a layer of dust, it is advisable to paint it.

Painting is the easiest and affordable way design of a black rubber flower bed

Oil, enamel and nitro paints are excellent for painting rubber products. The paint lays on a clean rubber surface in an even layer and lasts for quite a long time. You can also use leftover car paint to paint your flower bed. Using an aerosol can, the job can be completed in just a few minutes.

Using light-colored colors to decorate a flower bed will prevent overheating of the soil inside the container.

The combination of colors looks interesting when the base of the flowerbed is decorated in one color, and the cloves or petals are in another.

Most craftsmen paint the rubber flowerbed only from the outside. But still, to give the container a more attractive look, it is advisable to slightly grab the top part inner surface products.

When designing a flowerbed, you can give complete freedom to your imagination. Glass aquarium pebbles glued to the petals of a flower bed will create the illusion of dew drops.

If you want to further decorate the flowerbed, you can apply an ornament of a different color over a plain layer of paint. But you shouldn’t be too zealous: if the flowers grow wildly, the flowerbed pattern may be completely covered by hanging or creeping plants.

Minimum costs, a little free time - and a chic decoration for arranging a suburban area is ready

Such a flower bed will be a worthy addition to the interior and an element of the landscape design of the dacha. All that remains is to fill the container with a layer of soil and plant your favorite flowers.