Corrugated sheeting for a fence - which one is better to choose, taking into account operating conditions. What is the best material to make a fence from? What is the best material for a fence?

Psychologists say that what a person is like, so is the fence around his house. That is, how many people, so many decisions! But our choice is still limited. Let's see what fencing options are available to us today.

Additional means of protection (installation of special sensors, barbed wire, etc.).

A correctly selected fence for a summer cottage unites its territory into a harmonious and stylish architectural ensemble. No matter how beautiful a house is, it remains just a separate building. If a fence is added to it, made in the same style, in the same color scheme, the house begins to be perceived differently. When arranging a fence, its design and material should be linked to the facade of the main building and other buildings on the site.

You need to decide what qualities of a fence are most important for home owners: comfort, style, a feeling of spaciousness or enclosed space.

A proper fence should provide:

• protection from uninvited guests, including animals (cats, dogs, hares and others);
• ventilation of the area, resistance to bad weather (strong wind, rain, snow, temperature changes);
• normal insolation of the area.

At the same time, the fence must have an attractive, architecturally verified appearance with correct proportions. It is advisable to take into account the cost of maintenance (repair, painting, washing, surface protection) in advance.

Special Requirements:

• protection from prying eyes;
• noise protection;
• night and decorative lighting;
• CCTV.

Types of fencing for a summer residence

Exist different kinds fencing. There is an opinion that their construction should be trusted exclusively to professionals. But if you are used to doing everything on your site with your own hands, then you can easily cope with the construction of a fence. If the site is part of a guarded holiday village, you can build a light fence that serves more of a decorative function. Let's look at some common fencing options.

Mesh fence

If you need a cheap, fairly reliable and attractive fencing, then you can choose a mesh fence. Today, many meshes are produced from different materials, suitable for fencing areas.

Those who want to hide from prying eyes can decorate the mesh fence with fresh flowers and climbing plants, which will only add decorativeness to the area.

The most common among gardeners is a chain-link mesh consisting of wire spirals, where each spiral is screwed into the neighboring ones. It got its name from the German Karl Rabitz. Today, a mesh woven in this way can have a special polymer coating, improving its performance properties. The coating can be of different colors. Such a fence allows Sun rays necessary for the growth of vegetables, fruits and flowers and provides good ventilation.

The integrity of the chain-link mesh is easy to break even without the use of a tool - a piece of wire is easily woven out of the general fabric by circular rotation, and the fabric falls into pieces. But you can also connect the parts of the canvas again by repeating this operation in reverse order.

Flaws. Uncoated mesh rusts and looks sloppy. The top of the mesh sags; to fix it, you need to install a horizontal beam (lightly) or pull the wire. In this case, a strong wire tension can tilt the poles, and a weak one does not compensate for the sagging of the mesh.

Price square meter such a fence - from 300 rubles.

Bar fence

IN Lately Ready-made panels made of galvanized rods with a polymer coating are becoming widespread. High strength, reliability and manufacturability of products are combined with a modern appearance, ease of perception, transparency and good protective qualities. The fence post is made of a rectangular pipe 60 * 40 mm with a wall thickness of 2 mm. The pole is galvanized and coated with a polymer coating.

The fence panel is a welded lattice made of rods 4-5 mm thick, having spatial stiffening ribs. The grid cell has dimensions from 100 x 50 mm to 200 x 50 mm.

The height of the pillar is selected depending on the depth of concreting and the height of the metal section.

Two components

Monolithic base for a fence 510 mm wide with a laying depth of 400 mm - from 3900 rub./linear. m.

The cost per square meter of fence is from 400 rubles.

Flaws. Viewability - Additional measures to protect from views are required. Not available everywhere, price may greatly depend on delivery.

Not everyone hides beauty behind a high fence.

Fence made of corrugated sheets

This a budget option site fencing. The advantages of fencing made from corrugated sheets are high speed and ease of installation.

The sheets are produced in different colors, they are inexpensive, light, durable and functional. The material does not corrode, withstands frost and heat well, the height of such a fence can be any, since this material is cut to the customer’s size. The best is considered to be a sheet with a thickness of 0.5 mm, produced domestically.

An example of a carefully made corrugated sheet fence. It harmonizes with the architecture of the house. Installed only on the part of the site facing the road.

A strong foundation is not required for construction. If the height of the fence does not exceed 1.5 m, it will be enough to fill only the holes under the metal pillars of the frame with concrete. In this case, the depth of embedding the pillars in concrete is at least 80-90 cm. Assembling the frame will be much more convenient if you choose fence posts with a square rather than a round cross-section.

There is a hole left at the bottom for ventilation. The foundation itself is protected from precipitation by a canopy.

Flaws. The expansion of the profiled sheet is inexorably changing the surrounding landscapes. Previously cozy country streets surrounded by greenery are turning into casemate corridors before our eyes. At the same time, a solid three-meter wall, erected on the border of a six-hundred-acre plot, can destroy all vegetation 2-3 m from it, depriving plants of sunlight and fresh air, creating overheating in strong sun and hypothermia in cold weather, as well as promoting the formation of mold.

The cost per square meter of such a fence is from 1,300 rubles.

A fence made of corrugated sheets is easily damaged, after which it looks untidy and requires replacing the entire sheet.

Many of the disadvantages of solid fences made of corrugated sheets can be avoided by using a metal picket fence as a fence. Thanks to the aluminum-zinc coating, the service life of the product increases by 3-6 times.

Installing a European picket fence does not require any special skills. Thanks to its low weight, it is easy to transport. This is a great option for small areas. It is often used not only for fencing country house, but also to highlight zones on the site itself.

Unlike corrugated sheeting, the euro-picket fence does not look like a blank wall. A gap is left between the stripes, maintaining a partial view and not preventing the sun and wind from entering the fenced area.

Flaws. Each strip is molded during manufacture for greater strength. It is not very easy to bend it, but this does not stop vandals. More than once I had to see the top parts of the fence bent back. Such pickets are hardly repairable - the entire bar must be replaced.

The cost per square meter of fence is from 1,500 rubles.

If you install the slats lightly on both sides, the fence will hide the area from view without interfering with the ventilation of the area.

Wooden fences

A wooden fence fits organically into the surrounding landscape, looks impressive and does not disturb the harmony with nature. It is easy to repair - you can only replace the broken section, and not the entire section. Installation does not require much time.

A wooden fence can decorate even the most unprepossessing house and lift your spirits.

It is advisable to fasten the boards with galvanized nails, preferably with unsharp screws or roofing screws with a rubber gasket. If desired, the boards can be decorated with carved ornaments and figures, giving it a unique personality.

Flaws. The paint must be renewed as necessary, as it is susceptible to atmospheric influences. Wooden fencing needs to be treated periodically special compounds, protecting it from insects and weather conditions.

The cost per square meter of a fence made from a standard picket fence is from 400 rubles.

Fence with a monolithic base

If the budget allows, then such a fence can become the embodiment of the owner’s wildest fantasies.

A combined fence made of brick and metal lattice on a monolithic base.

The appearance of a country house or cottage should not be spoiled by fencing. To make a solid fence, you can choose bricks of different shades and shapes, use decorative tiles, artificial or natural stone, ready-made concrete sections, wood. Such structures often use forged and welded elements. metal constructions.

Flaws. High manufacturing cost.

A. Zavodskov

Often the fence for a summer cottage is erected temporarily, for the subsequent construction of a more substantial structure. And often there is simply not enough money for a high-quality fence, so we are looking for the cheapest fence for the dacha as an option.

To make the fence very inexpensive, we will build it with our own hands. Before installing the type of fence you have chosen, be sure to inquire about the technology of its installation and consult with a specialist.

Cheap fence for a summer residence, options

The price of the fence is affected by the size of the structure and the material from which it will be made. Accordingly, a high fence is more expensive than a low one, and a solid fence is more expensive than a transparent one. A structure that is attached to dug-in or concreted pillars will be cheaper than a fence mounted on a strip foundation.

Wooden picket fence - the most budget option

From such inexpensive material you can make a very beautiful and original fence for your dacha. An example of this is a photo of finished fences.

This is a very popular material for country fences. A picket fence is wood planks with a thickness of 18 to 22 mm and a width of 7 to 14 cm.

The height of a picket fence can be from 1.2 to 4 meters. To fasten this material, horizontal beams-purlins are used, fixed on oak, metal or concrete posts.

The approximate price of a picket fence is 700 rubles/sq.m. The final cost of the fence largely depends on the installation option chosen. For example, installing a picket fence in a checkerboard or herringbone pattern increases the price of the structure by 15-20%. A strip foundation, instead of simply driving columns into the ground, adds 20-25% to the cost.

Fences made of thin wicker boards and blockhouses are more expensive (from 1000 rubles/sq.m). A fence made of wicker boards attracts attention with its original appearance, and a fence made from a blockhouse wins the hearts of summer residents with the quality of its wooden frame.

The "Ranch" fence style came to us from the Wild West. For its construction, wide horizontal boards or beams are used, which are secured to low wooden posts. The disadvantage of such a fence is that it does not protect the area from entry by unauthorized persons and even small animals. It is understandable, since this fence was created for a vast area of ​​pasture. But installing it does not take much time. And in terms of the cost of materials and labor, such a fence is comparable to the price of a picket fence.

Wattle fence for fencing a summer cottage

Fans like this type of fencing made from hazel or willow branches. rustic style. It is original, quite strong and durable. At great desire The technique of weaving branches can be mastered with your own hands in a matter of hours. If you don’t have time to do manual creativity, then you will have to pay from 500 rubles per 1 square meter for the manufacture and installation of a fence.

We advise anyone who is interested in building a cheap fence for their dacha to pay attention to unedged boards. By freeing it from the bark, sanding it and varnishing it, you can get a beautiful fence for your summer cottage at a minimal price (about 550 rubles/sq.m.).

Regarding the durability of wooden fences... The service life of wood treated in an autoclave increases to 30 years. The service life of an ordinary, painted board does not exceed 15 years.

Fence for a summer residence made of chain-link mesh

The cheapest fence can be built from chain-link mesh. It is released in different options height (1.0-3.0 meters), length 10-18 meters and cell size 20-100 mm. To protect the wire from corrosion, galvanizing and polymer coating are used.

You can install such a fence by rolling out the mesh and fixing it to metal or concrete posts. The second option is the production of mesh sections, that is, frames from corners or pipes and their installation on poles.

The service life of mesh fencing reaches 30 years. Such fences do not shade the area and at the same time are reliable, as they create a serious barrier for uninvited guests.

The average price of 1 square meter of turnkey chain-link fence is 180-240 rubles.

Fence for a dacha made of Euro picket fence

The popularity of wooden picket fences prompted stamped metal manufacturers to create something similar. The result is a very aesthetic and durable material.

In terms of service life, wood cannot be compared with it. In addition, fencing made from Euro picket fences does not require periodic painting or antiseptic treatment. The protective polymer film used to cover galvanized steel retains its color and integrity for 25-30 years.

Installation of a European picket fence, taking into account the price of materials and labor, starts from 800 rubles per 1 sq.m.

Country fence made of corrugated sheets

Today it is the leader in dacha fencing. This is a solid fence. Its affordable price allows any summer resident to use it to fence their plot. Not a single living soul can penetrate such a fence. Installing a corrugated fence is simple and therefore inexpensive. To this we can add a huge selection of colors and textured patterns of corrugated sheets.

• Use corrugated sheeting with a thickness of 0.5 mm. It is not much more expensive than 0.4 mm thick flooring, but it will not become dented and will not lose its attractiveness.
• The support spacing should be no more than 2-2.5 meters, ideally 1.5 meters. And if you take the distance between the supports to be 3 m, then under the influence of wind loads, the fence canvas will begin to bend and may lose its original appearance.
• Dig the support pipes to a depth of at least 1.5 meters and be sure to concrete them.
• The fence posts must be made of 60-80 mm pipe, with a wall thickness of at least 2 mm.
• Take corrugated sheeting with a double-sided polymer coating, since galvanized decking (without painting) becomes stained after two years, loses its shine and may begin to corrode.

Slate fence for a summer house

To install such a blind fence, both flat and corrugated asbestos-cement slate are used. The first one is stronger because it is thicker.

Installation flat slate a large format (1.5 x 3 meters) is faster than installation of a smaller wavy one (1.75 x 1.125 m). The slate is placed on steel profile purlins welded or bolted to metal posts.

A slate fence has high strength, as well as heat and frost resistance. It is more durable than wood and is not afraid of corrosion like metal. However, this material has a significant drawback - it is fragile and inconspicuous in appearance. And if nothing can be done about the first disadvantage, then the second can be easily corrected - paint the slate.

Result: the cheapest fence for a dacha is a fence made of chain-link mesh (200 rubles/sq.m.), the second place in price is fences made of welded mesh, wooden picket fence and unedged boards (450-600 rubles/sq.m.) , third place in our ranking is given to fences made of corrugated board, slate, blockhouse and edged boards(700-1000 rub./sq.m.).

Fence posts

When building a fence, much attention is paid to the installation of pillars - the supporting part of the fence. And the more securely they are installed, the stronger the fence will be, which means it will last longer.

Installation of fence posts

During construction, 3 methods of installing support pillars are used.

• Direct driving into the ground
• Partial concreting. It is performed in two ways: pouring a concrete collar, or filling the well below the freezing line of the soil.
• Complete concrete pouring of the underground part of the rack, including the installation of a strip foundation

Which method to choose depends on the quality of the soil on the site, its saturation with moisture and the degree of freezing. Also, the choice of installation option is influenced by vertical and lateral loads created by the weight of the structure and its windage. If you decide to install a solid fence, then it must withstand the wind well, the load from which often exceeds the weight of the fence.

Direct driving of pillars into the ground speeds up and reduces the cost of building a fence, but it also has many disadvantages.

• If the soil is soft or loose, then the stand may become loose over time under the influence of the wind, since fences have a large windage (if made of corrugated sheets, polycarbonate, boards).
• If the height of the pillar is planned to be higher than 2 meters, even from a chain-link mesh, then this method of installing pillars will also not work - any strong wind will also rock the structure.
• If your site has clayey, moist soil that swells at subzero temperatures, then the supports will come out of the soil by 10 centimeters in the first winter.

That is, fence posts simply driven into the ground cannot bear a large weight load. This installation is only suitable for low fences with little windage. Or if the site has rocky hard soil.

Concreting a little more complicated and more expensive than the first method of attaching fence supports. Yes, and it will take more time. Only the hardening of the concrete will take 3 weeks. But this method is more reliable, since concrete pillars will last 30-50 years without tilting. Moreover, strengthening concrete mixture Suitable for all types of fences, including heavy ones.

Brick fence posts

A brick support without a reliable connection to the foundation, even despite its considerable weight, will not stand for long. A strong wind load, acting on solid sections of the fence, inevitably leads to the overturning of a post that is not secured in the foundation. In addition, do not forget about seasonal soil movements. Lowering and rising a couple of centimeters up and down throughout the year, the foundation must work in unison with the posts and sections of the fence.

The optimal design of a foundation with brick pillars designed for a fence made of corrugated board is clearly illustrated by the diagram in the photo

You can see that the brick posts have a steel rod made from square tube or rebar frame installed in them. Embedded plates are welded to it. Steel purlins for corrugated sheets or picket fences are attached to them.

Foundation type – strip rubble concrete or concrete. A trench is dug under it, and holes with a diameter of 15-20 cm are drilled in the places where the pillars are installed. First, the concrete is poured into the wells with the pillar racks installed in them. After this, layer-by-layer concreting of the trench begins.

The main parameters of the foundation (depth, width, degree of reinforcement) and the height of the fence are determined by calculating strength and stability.

We used the following dimensions to install brick fence posts:

• trench depth – 20-30 cm;
• the depth of the well for installing metal racks of brick pillars, counting from the surface of the earth - 90-100 cm;
• height of the grillage (the upper part of the foundation located above the ground surface) – 40-60 cm;
• foundation width – 20-35 cm;
• the distance between the pillars is from 2.5 to 3 meters;
• height of pillars from 150 to 180 cm ( cross section masonry 38x38 cm).

In wet soils, you need to drill holes for posts below the freezing depth so that the forces of frost heaving do not deform the fence.

In weak and unstable soils in the upper part of the foundation, before concreting it, it is advisable to lay a reinforcement cage of 4-6 rods with a diameter of 14-18 mm. It will maintain the integrity of the foundation and absorb the loads that arise in the concrete during soil subsidence.

Laying brick pillars begins no earlier than 2-3 weeks after concreting. Having laid waterproofing under the posts, you can begin to work.

Perfectly straight seams guarantee excellent appearance brick columns. To simplify the work, experienced masons use pieces of a square rod, which serves as a seam template.

In the photo there is a support pillar made of brick with a cross section of 38 x 38 cm. Two reinforcing bars are installed inside for reinforcement. The space between them and the masonry is filled with fine-grained concrete or mortar.

For fences with a height of two meters or more, the cross-sectional size of the post is increased to 51 x 63 cm or 64 x 77 cm. The dimensions of the reinforcing frame increase accordingly.

Metal fence posts

Steel supports are well suited for fences made of corrugated sheets, wood, plastic, metal mesh, welded and forged fences. These are one of the most affordable and durable solutions when installing any fence.

There are iron pillars different types: made of round and profile pipes, screw. They also differ in height, metal thickness and diameter. You can make such fence supports from new materials, as well as from used ones.

The diameter of a pole made from a regular pipe is usually 57, 76, 89 mm. The wall thickness can be any, but the thicker, the longer its service life.

For difficult soils, screw metal piles are used. On the lower part they have a cutting blade, which allows you to insert the pipe into the soil quickly, without the use of complex equipment. With the help of this blade the pipe is held firmly in the ground.

Distance between fence posts

When selecting metal poles, take into account our experience:

• for a fence height of 2-2.5 meters, take the cross-section profile pipe 60 x 40 mm, products measuring 40 x 40 mm are suitable for 1.5 fences,
• optimal diameter round pipe— 57 mm,
• take the maximum size of channel corners installed individually to be 90 and 160 mm, respectively,
• the interval between pillars should be within 2-3 meters. A smaller distance is impractical from an economic point of view, but a larger distance sharply reduces the reliability of the structure.

Our calculation of the column spacing for a plot length of 13.4 meters and a fence height of 1.5 meters

• Divide this distance into 4 sections, you get a length of 3.23 meters. With this spacing, the fence can be built from brick or chain-link mesh on metal posts. It is not advisable to install corrugated sheets or other solid material, as the racks will be loosened by the wind.
• If divided into 5 sections, you get a step of 2.56 meters. This spacing is suitable for most designs.
• Dividing it into 6 spans will give a distance between pillars of 2.12 meters. The result will be a reliable structure, but the price of the fence will increase. Although in this case you can save money if you take pillars with a smaller cross-section.

The optimal distance between the posts of a solid fence 2 meters high is 2.5 meters. This perfect option in terms of price/quality ratio when it comes to popular fencing made of corrugated sheets on metal supports.

Often among questions about dacha fencing, the fence between dachas is considered. Neighbors in the areas find out what kind of fence they can fence off with so that it does not contradict the rules. How high can a fence be installed and what should it be made of? Best option in this case, use mesh fencing. Or make a decorative living fence from climbing plants. The main thing is not to forget that there should not be a deep shadow from the fence, which naturally will not be liked by neighbors in the country, since garden crops will not grow well in this place.

One of the most inexpensive fences for a dacha or a private house - from corrugated sheets. Its design is simple - dug-in pillars to which transverse joists are attached. A corrugated sheet is attached to this grille using self-tapping screws or rivets. Everything is really simple, especially if you know how to use a welding machine. Although there is a technology without welding - on bolts or on wooden crossbars. In any case, you can build a fence from corrugated sheets with your own hands. If necessary, you can do all the work alone, but when installing sheets it is more convenient with an assistant.

Construction with metal posts

The simplest production is a fence with metal posts dug into the ground. You can use round or square pipes, but it is more convenient to work with square - profiled ones.

The length of the pillars is taken depending on the desired height of the fence, plus 1 to 1.5 meters are added for penetration into the ground. It is necessary to bury it in the ground below the freezing depth of the soil. For each region, the soil freezes to a different depth, but in Middle lane In Russia it is about 1.2 m. When determining the depth to which you bury pipes, it is better to play it safe and make the holes deeper. Otherwise, the forces of winter heaving will simply push the posts out, and your fence will collapse (see photo).

For pillars, a profiled pipe with a cross section of 60*60 mm and a wall thickness of 3 mm is usually taken. The distance between the pillars is from 2 to 3 meters. The greater the thickness of the profiled sheet, the less often you can install pillars. If the soil is difficult to dig, it makes sense to make the distances larger, otherwise you can save on purchasing metal - the thinner, the cheaper and the difference in price is significant.

Logs for a fence made of corrugated sheets are made from a profile pipe 40*20 or 30*20 mm. The second option is wooden blocks 70*40 or so. When using wood, a significant amount is saved, but the wood disappears faster, and besides, it warps from moisture. Most likely, in a few years you will have to change the logs, and they will already be metal. But it will work as an economical option for several years.

When making a fence from corrugated sheets with your own hands with wooden logs, do not forget to thoroughly treat the wood with an antibacterial compound (for example, Senezh Ultra). It is better to do this in the bathroom - immerse the bars completely in the solution for 20 minutes. This way they will last longer.

The number of logs depends on the height of the fence. Up to 2 meters - two are enough, from 2.2 to 3.0 meters you need 3 guides, even higher - 4.

Methods for attaching joists to poles

Metal logs are welded either between the pillars or in front. The first method is more labor-intensive, and produces more waste: you have to cut the pipes into pieces. But with this arrangement of the logs, the structure turns out to be more rigid: each post serves as a support for the sheet and it “walks” less; if desired, a couple of additional fasteners can be placed along it.

If you weld pipes in front of a pole (from the street side), there is less work, but you will still have to cut and there will be waste: it is necessary that the weld of two sections falls on the pole. Unless you adjust the distance so that they lie flat. Then you purchase materials in advance, and then calculate the installation step of the pillars.

To fasten wooden blocks, holders are welded in front or on the sides - metal corners or U-shaped guides. Holes are then drilled into them and fastened with bolts or self-tapping screws.

There is an option to assemble a fence from corrugated sheets without welding. There is a special one for this fastener, which is called X-bracket. This is a cross-shaped plate with curved edges, which is attached to self-tapping screws.

Corrugated sheeting for fences

For fences, corrugated sheets marked C are used - for fences and walls. There are also N and NS, but they are not suitable for fences - that’s more roofing materials. It is rare to see A and R markings; A profiles can be used for fences.

In the marking, after the letter there is a number - from 8 to 35. It indicates the height of the rib in millimeters. So C8 means that the profiled sheet is intended for a fence, and the wave height is 8 mm. How more height waves, the more rigid the surface will be. At strong winds take at least C10, or even C20.

Sheet thickness - from 0.4 to 0.8 mm. Most best option— thickness 0.45 mm or 0.5 mm. They are suitable for fences up to 2.5 m in height. If you need a higher one, take at least 0.6 mm.

The height of the sheet is usually around 2 meters, you can find 2.5 m. The width can be very different - from 40 cm to 12 meters. Different factories produce corrugated sheets of different formats.

Corrugated sheeting can be galvanized or painted (painted ones are 15-25% more expensive than galvanized ones). There are two types of paint applied: powder and polymer coating. Powder coating is more durable, but also more expensive.

There are sheets painted on one side - on the second there is galvanization, covered with a gray primer, there are sheets on both sides. Double-sided coating is naturally more expensive than single-sided painting, but it looks better and has a longer service life.

Support pipes and fence logs are usually primed and then painted. And somehow it became customary to paint them with dark paint. By then attaching a corrugated sheet painted on one side to them, you get a clearly visible “skeleton” on a light gray background. On small area this can be critical. Please note that when building a fence from corrugated sheets with your own hands, paint the supporting frame light gray. The result will please you: it looks much better from the yard.

How to attach a corrugated sheet to a frame

The sheet is secured with self-tapping screws or rivets. Self-tapping screws for corrugated sheets are galvanized and painted. They are selected to match the color of the fence. Tighten with a screwdriver using an attachment.

The installation step depends on the wavelength and height of the fence. The higher the fence, the more often you need to install fasteners. It holds normally if you fasten it through a wave, to increase strength, with two lags you can fasten it in a checkerboard pattern, and not one above the other.

When installing, it is important to align the first sheet vertically. Then everything else will install without problems. When laying sheets, the next one goes onto the one already installed on wave 1. Attach to the bottom of the wave. The self-tapping screw must be installed strictly perpendicularly. Then the hole is blocked with a washer and precipitation will not cause the paint to peel off.

To see how one can attach a corrugated sheet to a fence, watch the video.

DIY corrugated fence: photo report

A fence from neighbors and a front fence were being built. The total length is 50 meters, height 2.5 m. Brown corrugated sheet is used on the front, galvanized sheet is used on the border, thickness 0.5 mm, grade C8.

In addition, the following materials were sent:

• for poles profiled pipe 60*60 mm, wall thickness 2 mm, pipes 3 m long;
• 80*80 mm with a 3 mm wall were installed on gate posts and gates;
• logs 30*30 mm;
• gate and wicket frame 40*40 mm;

One person built the finished fence from corrugated sheets with his own hands.

The fence is installed on metal posts, between which the base is then poured. The owners need it because they plan to plant a flower garden in front of the fence (you can see the fence made for it). It is also needed to prevent water from flooding the yard during heavy rainfalls. Metal sheets are not attached immediately from the ground, but slightly retreating. This gap is closed with a die-cut tape that remains in some industries. This was done on purpose so as not to block the access of air, so that the earth dries out faster.

Metal preparation

The first stage is preparing the pipes. A rusty pipe arrives from a warehouse; in order for it to serve for a long time, you have to clean off the rust, then treat it with Anti-Rust and then paint it. It is more convenient to first prepare all the pipes, prime and paint, and then just start installation. The rust was removed with a metal brush mounted on an angle grinder.

There were only 6-meter pipes in the warehouse. Since the height of the fence is 2.5 meters, you need to bury another 1.3 meters, total length the pillar should be 3.8 meters. To save money, they cut it in half into 3-meter pieces, and the missing parts were welded with various scrap metal available on the farm: cuttings of corners, fittings, pieces of various pipes. Then everything was cleaned, primed and painted.

Installation of pillars

The two corner posts were installed first. The holes were drilled with a drill purchased from a store. The soil was normal; it took about 20 minutes to complete one hole 1.3 meters deep.

The first pillar was placed horizontally and so that it rose above the ground to a height of 2.5 meters. To set the second one, it was necessary to recapture the height. A water level was used. You need to fill it in such a way that there are no bubbles - from a bucket, not from a tap, otherwise it will lie.

They placed the second post along the marked mark (they put it on a plank that was placed next to the hole) and concreted it. When the cement set, twine was pulled between the pillars, along which all the others were aligned.

The filling technology was standard: a double-folded roofing material was installed in the hole. A pipe was placed inside, filled with concrete (M250) and placed vertically. The level was controlled by a plumb line. It is very important to position the posts correctly, otherwise the entire fence will warp.

During the work, several times it turned out that the concrete was poured not inside the rolled up roofing material, but between it and the walls of the pit. It was a little pleasure to scoop it out from there, so the protruding part was cut into petals and nailed to the ground with large nails. Problem solved.

After the concrete had set, we made portable formwork from boards covered with thick film. With their help, the basement was filled. To make it stronger, reinforcement bars are welded along the bottom to the pillars on both sides. Formwork was placed around them.

Installing jumpers

Cleaned, primed and painted pipes for the crossbars were cut and welded. They cooked between the pillars. They also need to be leveled to make it easier to attach.

After the welding is completed, all welding areas are cleaned with a wire brush, treated with Anti-Rust and then painted.

Installation of corrugated sheets

Since the top lintel runs along the very top of the fence, and it is welded exactly level, there were no problems with leveling and installing the sheets. First they fastened along the edges, then installed intermediate screws. To make it easier to place them evenly, a thread was pulled between the outer ones.

Smooth installed fasteners- also beautiful

Afterwards the gates were welded and attached. As a final touch, additional elements were installed on top - a U-shaped profile covering the top of the fence and plugs for the pipes.

As you understand, there is nothing particularly complicated. It is important to align the posts evenly and weld the frame. This is the main task. A lot of time - about 60% - is spent preparing pipes - cleaning, priming, painting.

Fence made of corrugated sheets with brick pillars

Of course, a fence with brick pillars looks more decorative. If you wish, you can do it, but it will take more time. There are two options:

• Make a full-fledged strip foundation. But it is long and expensive. On well-drained soils, you can make a shallow foundation; on heaving soils, you will have to dig below the freezing depth of the soil. And although the tape will not be wide, there is a lot of work - digging a trench along the entire length of the fence, installing formwork, tying reinforcement, pouring it and then finishing it. Place brick pillars on top. Durable, reliable, but expensive.
• Make according to the scheme described above: load-bearing pillars with a base. Bricks are laid around the pillars. This method is less expensive. About,

The whole technology is the same, only the reinforcement will be more rigid - two belts of two rods with a diameter of 10-12 mm. It will be necessary to install embedded elements in the pillars to which the guides will be attached. They (mortgages) can be welded to the pipe after it has been exposed and the solution has set.

Photos of the design of fences made of corrugated sheets

Often a profiled sheet is combined with forging, sometimes a frame is made from a profile pipe, a profiled sheet is mounted into it and the whole thing is decorated with metal patterns - forged or welded. Another option to make the fence non-standard is to install the wave not vertically, but horizontally. It would seem like a small change, but the appearance is different. Some ideas in the photo gallery below.

The first question that arises before an owner who decides to fence his plot is what material to choose for the fence. Indeed, there are many options, it is difficult to choose the best one for yourself. We have collected the most popular materials for fencing areas today.

Corrugated sheet

If the task is to make a solid fence and reliably cover the area from prying eyes, then corrugated sheeting has no competitors in popularity. This is explained simply - this material is the cheapest. And it’s easy to install a corrugated fence with your own hands.

This material has some disadvantages, no doubt about it. Corrugated sheeting can be dented upon impact, if it is secured with self-tapping screws, they can become loose over time, there is a risk that the sheets will be unscrewed and stolen, and during windy conditions a metal sheet may make unpleasant sounds.

However, a large selection of colors, the ability to choose corrugated wood or stone, ease of installation and maintenance, durability and reasonable price make this material a leader in the construction of blind fences.

Tree

The main competitor of corrugated sheeting, so far completely unsurpassed by it. Wood is an affordable material that allows you to experiment with fences. Can be done wooden fence whatever you like - low and high, deaf and with gaps, carved and massive, painted in any color. In addition, if the house on the site is wooden, the same fence will create a harmonious picture.

Of the minuses, it is advisable to treat it with fire retardants, because wood burns well, you will have to regularly care for it, renew the paint, and wood does not last as long as metal. However, repairing a wooden fence is not that difficult.

Concrete

Concrete fences attract owners of personal plots with their reliability, durability, and variety of shapes. A simple gray fence can be painted, and you can choose the fence to your liking. There is no particular need to take care of a concrete fence, but during installation it will require more effort - the fence is heavy.

Rabitz

Inexpensive fencing that is often used on summer cottages. The main disadvantage is that it does not hide anything, it simply marks the boundaries and prevents neighbors’ animals from entering the site. Chain-link mesh is in demand due to its ease of installation and low cost.

Brick

Already more expensive, but popular material for the fence. Brick fences have a number of advantages, including giving the site a well-groomed appearance, looking attractive, one might say, elite, and differing in a variety of colors and shapes.

Building a brick fence is more difficult than installing corrugated sheets or ready-made concrete sections. But the fence will last a long time and can be repaired if necessary.

Forging

Wrought iron fences are always beautiful, elegant, and delicate. Yes, they do not hide the area, but they look very elite and attractive. In addition, it is easy to install ready-made factory sections. The downside is that forged fences cost a lot, especially if they have a complex shape. But they last a long time.

Polycarbonate

Polycarbonate fences themselves can look unreliable, too simple and unattractive. But if polycarbonate is combined in a fence with forging or chain-link mesh, it’s a completely different matter! This fencing option is now quite popular due to its excellent results, durability and ease of installation.

Let us repeat - we have selected only the most popular materials for fences today. The choice is actually wider. You can use gabions, hedges, polyvinyl chloride (PVC), which is just gaining popularity, wickerwork from branches, a natural stone, even plastic bottles.

Today, a person who decides to build a house on his own must be prepared for significant costs. Most of the money is often spent on the foundation and laying the walls, but in most cases you have to spend a lot on things that at first glance do not seem obvious. We're talking about a fence.

A smart owner of a future home sets the goal of saving on such details. Moreover, this is a completely justified and feasible solution.

A key way to reduce the cost of a fence is to do it yourself. Do not underestimate the importance of this process, since the fence is not only decorative structure, which hides the territory from prying eyes, but also a protective fence designed to prevent suspicious persons from entering the site.

In other words, the design must be reliable, durable and aesthetically pleasing. Only under such conditions will it satisfy all the requirements placed on it. In our case, ease of installation should also be added to the list of conditions.

Materials for building a fence

There are several basic materials that allow you to build an inexpensive and functional structure:

• tree;
• Rabitz;
• corrugated sheeting;
• plastic.

The main limiter in construction technology and combination of materials is financial costs. First, you should choose the material that will become the basis for the fence, then find a suitable economical construction technology, and then make basic calculations.

Wooden fence: pros and cons

Modern construction stores offer a large number of wood options suitable for construction reliable design. This material has some advantages over others, which makes it almost the most popular product.

Advantages of wooden structures:

Flaws:

Materials for installing a wooden fence

To build a standard wooden fence, you will need the following materials: picket fence, cross boards, support posts, pegs, ropes, cement, sand, shovel, saw, fasteners, and a special anti-rotting agent for wood.

It is best if the entire set of tools is collected in one place within reach to facilitate access to components.

Construction of a wooden fence

Stage 1. We mark the site for the structure and determine the location of the gate. We use pegs and rope. The distance between the pillars is 2 meters. This is how the structure’s resistance to external influences is ensured.

Stage 2. Take a shovel and dig holes for the support pillars.

Stage 3. We immerse the pillars in the ground by about one-fourth of their length.

Stage 4. We install spacers to secure the pillars and fill the hole with cement mixed with sand.

Stage 5. We drive in the cross boards.

Stage 6. We fix the picket fence vertically on the transverse boards.

Stage 7. Paint the finished fence in the chosen color.

At this point, the work on the construction of a wooden fence is considered completed. This is a relatively simple fence option that is usually installed as a temporary option.

Fencing made from mesh is considered to be the most cost-effective option available today. Among the advantages of such fences it should be noted:

Clarifying the last point, it should be noted that installation will require tools that are easy to find in every home. In addition, modern stores offer a wide range of meshes of the most different colors and sizes, which allows you to move away from the banal appearance of the fence.

Materials for building a fence:

For those who adhere to more original solutions, there are vinyl coatings, but they tend to lose color over time.

Construction of a chain-link fence

Step 1. Carry out the markings.

Step 2. We dig holes for the support pillars.

Step 3. Place the pipes in the holes.

Mesh fence

Step 4. Fill the holes with pre-prepared concrete mortar. In some cases, builders simply drive pipes into the ground using a sledgehammer. This is possible provided the soil is sufficiently soft.

Step 5. We begin to secure the mesh. We fasten the beginning of the roll at the first pipe, which acts as the beginning of the future fence.

Step 6. We stretch the mesh around the remaining supports, gradually securing it. It is important to ensure that the mesh does not sag, otherwise all work will be useless.

Stages of work during sectional construction of a fence

Step 1. Lay the foundation.

Step 2. We build a tension frame from metal corners.

Step 3. Fasten the corners between the supports.

Step 4. Attach the mesh inside the corners using welding.

Chain-link fences are very easy to erect without the help of specialists, which allows you to save a lot and try your hand at it.

Corrugated fencing

This type of fence can rightfully be called the most common. Most often it is used for fencing summer cottages and private houses. To build such a fence you will need welding machine and a little patience. In general, the installation technology is very simple, which can be attributed to the advantages of the design.

Modern construction markets They offer corrugated sheeting in various colors and sizes, so buyers should not limit themselves to their imagination.

As additional components, you should purchase anti-corrosion paint, support structures, logs, shovels, screws, and also make a cement mortar.

Installation of a corrugated fence

Step 1. We mark for the future fence. It is important that the distance between adjacent supports does not exceed two and a half meters. Pegs and twine are used as auxiliary elements.

Step 2. We make indentations in the established places. In the future, supporting elements will be inserted into these holes. This task can be accomplished using a special drill or simply digging a hole with a shovel. The standard depth of the pit is one hundred and thirty centimeters.

Step 3. We install support pillars at the corners of the territory, and then along the entire perimeter.

Step 4. Strengthen the bases of the pillars with cement.

Step 5. Install the logs that are necessary for further attaching the corrugated sheeting.

Step 6. Attach the sheets to the joists using self-tapping screws.

Step 7. Paint the metal elements with enamel. In some cases, a primer is used.

Ultimately, the fence turns out to be quite pleasant in terms of aesthetic characteristics, as well as durable and reliable. It looks much more solid than a fence made of wood or chain-link mesh, and therefore can be regarded as a full-fledged fence.

Plastic fence

Plastic deservedly bears the title of one of the most affordable materials for building a fence. This is a real salvation for summer residents who do not want to build expensive structures on their plots.

The positive aspects of such fences are as follows:

• strength;
• durability;
• ease of installation;
• low cost;
• nice appearance.

Installation of a plastic fence

Stage 1. We mark the area where we plan to install the fence.

Stage 2. Mark the places where the wicket and gate will be.

Stage 3. In established places, we drive support pillars into the ground.

Stage 4. We fix piles made of durable metal in the corners.

Stage 5. We stretch the piles along the perimeter of the site.

Stage 6. Secure the pillars with spacers.

Stage 7. Attach the sections between the supports.

Thus, as a result of simple machinations, a beautiful and functional fence is obtained, which in its external qualities, although it cannot compete with structures made of decorative stone or forged elements, completely satisfies the owners of the territory.

This article discussed the most simple ways construction of fences, the choice of which is determined only by your preferences. Now you can build a cheap fence with your own hands.

Video – Construction of a wooden fence

Video - Construction of a mesh fence

Video - Installation of a fence made of corrugated sheets

Video - Installing a plastic fence